
تعداد نشریات | 21 |
تعداد شمارهها | 653 |
تعداد مقالات | 9,560 |
تعداد مشاهده مقاله | 68,461,595 |
تعداد دریافت فایل اصل مقاله | 47,920,004 |
بهبود افت فشار و انتقال حرارت جابهجایی اجباری فلز مایع در اثر اعمال میدان مغناطیسی ثابت و متناوب | ||
مدل سازی در مهندسی | ||
مقالات آماده انتشار، پذیرفته شده، انتشار آنلاین از تاریخ 23 شهریور 1404 | ||
نوع مقاله: مقاله مکانیک | ||
شناسه دیجیتال (DOI): 10.22075/jme.2025.32955.2605 | ||
نویسندگان | ||
احمد رضا رحمتی* 1؛ عباس ملایی2 | ||
1دانشگاه کاشان | ||
2دانشکده مهندسی مکانیک، کاشان، کاشان، ایران | ||
تاریخ دریافت: 21 دی 1402، تاریخ بازنگری: 08 تیر 1404، تاریخ پذیرش: 16 تیر 1404 | ||
چکیده | ||
چکیده افزایش نرخ انتقال حرارت در صنایع مختلف به جهت بهبود کارایی تجهیزات، جلوگیری از آسیب به قطعات و کاهش هزینه، از بحثهای ضروری در صنعت است. از جمله راهحلهای افزایش انتقال حرارت، استفاده از چاههای حرارتی فعال و غیرفعال است. در این پژوهش از یک چاه حرارتی فعال و فلز مایع گالینستن بهعنوان سیال عامل در نظر گرفته شده است. گسستهسازی معادلات ناویراستوکس به روش حجم محدود مرتبه دوم بالادست انجام شده است. اثر اعمال میدان مغناطیسی در جهت Y (عمود بر محور جریان) به چاه حرارتی، سبب بهوجودآمدن نیرویی در خلاف جهت حرکت جریان به نام نیروی لورنتز شده که توزیع سرعت M شکل را باعث شده است. این نوع توزیع سرعت، سبب افزایش سرعت جریان در مجاورت دیوارهها و کاهش سرعت جریان در خط مرکزی میکروکانال شده است. با اعمال میدان مغناطیسی متناوب در جهت X به چاه حرارتی، توزیع سرعت به حالت تخت درآمده است. نتایج نشان داد اثر اعمال میدان مغناطیسی مستقیم و متناوب عدد ناسلت را بهبود داده است. با اعمال میدان مغناطیسی متناوب در جهت Y، عدد ناسلت 38 درصد و با اعمال میدان مغناطیسی در جهت X، عدد ناسلت 62/11 درصد بهبود یافته است. افزایش گرادیان سرعت حاصل از اعمال میدان مغناطیسی مستقیم و متناوب سبب افزایش ضریب اصطکاک نیز شده است. در این پژوهش با بررسی اختلاففاز میدانهای مغناطیسی و الکتریکی از صفر تا 90 درجه نشان داده شد که افت فشار و ضریب اصطکاک حاصل از میدان مغناطیسی، کاهشی شده است. | ||
کلیدواژهها | ||
انتقال حرارت جابهجایی اجباری؛ فلز مایع؛ چاه حرارتی؛ میکروکانال؛ میدان مغناطیسی مستقیم و متناوب؛ اختلاففاز | ||
عنوان مقاله [English] | ||
Improving the pressure drop and heat transfer of forced convection of liquid metal by applying direct and alternating magnetic fields | ||
نویسندگان [English] | ||
Ahmad Reza Rahmati1؛ Abbas molaei2 | ||
2Mech. Eng Dep., Univercity of Kashan, kashan, Iran | ||
چکیده [English] | ||
Increasing the heat transfer rate in various industries to improve the efficiency of equipment, prevent damage to parts and reduce costs is one of the essential discussions in the industry. In this research, an active heat sink and gallinsten liquid metal is considered as the working fluid. The effect of applying the magnetic field in the Y direction (perpendicular to the flow axis) to the thermal well has caused the creation of a force against the flow direction called the Lorentz force, which has caused the M-shaped velocity distribution. This type of velocity distribution has caused an increase in the flow velocity in the vicinity of the walls and a decrease in the flow velocity in the central line of the microchannel. By applying an alternating magnetic field in the X direction to the thermal well, the velocity distribution has become flat. The results showed that the effect of direct and alternating magnetic field has improved Nusselt number. By applying an alternating magnetic field in the Y direction, the Nusselt number is improved by 38% and by applying a magnetic field in the X direction, the Nusselt number is improved by 11.62%. The increase in the speed gradient resulting from the application of direct and alternating magnetic field has also increased the friction coefficient. In this research, by examining the phase difference of magnetic and electric fields from zero to 90 degrees, it was shown that the pressure drop and the friction coefficient resulting from the magnetic field have decreased. | ||
کلیدواژهها [English] | ||
Forced convection heat transfer, liquid metal, heat sink, microchannel, direct and alternating magnetic field, phase difference | ||
مراجع | ||
| ||
آمار تعداد مشاهده مقاله: 1 |