پیوندهای مفید
آمار
| تعداد نشریات | 21 |
| تعداد شمارهها | 691 |
| تعداد مقالات | 10,035 |
| تعداد مشاهده مقاله | 71,039,333 |
| تعداد دریافت فایل اصل مقاله | 62,488,790 |
Optimizing the Amount of Multicomponent Polymer Fibers in RAP Mixtures Based on the BMD Criteria | ||
| Journal of Rehabilitation in Civil Engineering | ||
| دوره 14، شماره 3 - شماره پیاپی 43، آبان 2026 اصل مقاله (989.98 K) | ||
| نوع مقاله: Regular Paper | ||
| شناسه دیجیتال (DOI): 10.22075/jrce.2025.2361 | ||
| نویسندگان | ||
| Mahmoud Reza Keymanesh* 1؛ Amin Jafari2 | ||
| 1Associate Professor, North Tehran Branch, Payam Noor University | ||
| 2Department of Civil Engineering, Payame Noor University, Tehran, Iran | ||
| تاریخ دریافت: 14 خرداد 1404، تاریخ بازنگری: 27 مرداد 1404، تاریخ پذیرش: 30 آبان 1404 | ||
| چکیده | ||
| As the final part of a pavement, asphalt mixtures are aimed to ensure the road users’ safety and comfort and any defect in them can disturb the users. They usually consist of bitumen, aggregates and air (as main components) plus a wide range of additives, among which fibers are more important and attract the attention of researchers because they overcome the tensile weakness of asphalt mixtures and improve their performance features. This research has used multicomponent fibers to modify the properties of asphalt mixtures containing reclaimed asphalt pavement overhauled by waste, engine-oil rejuvenator, and applied the balanced mix-design method to optimize the materials. The dynamic creep test, Illinois Flexibility Index (IFI), indirect tensile strength (ITS), and tensile strength ratio (TSR) were utilized to evaluate the mixtures’ performance. The findings revealed that the incorporation of multi-component polymer fibers improved the rutting resistance of asphalt mixtures by up to 70%, whereas the addition of waste oil decreased rutting resistance by up to 1.5%. Furthermore, the highest IFI values were recorded for the specimens containing waste oil. However, the rejuvenator exhibited a negligible effect on the TSR values. Considering the Balanced Mix Design (BMD) criteria, two mixtures containing 40% reclaimed asphalt pavement (RAP), 0.75% rejuvenator, and 0.8% or 1.2% multi-component fibers were identified as the optimum mixtures in this study. | ||
تازه های تحقیق | ||
| ||
| کلیدواژهها | ||
| Reclaimed asphalt pavement؛ Polymer fibers؛ Balanced mix-design؛ Recycled rejuvenator | ||
| مراجع | ||
|
[1] Shaker H, Ameri M, Aliha MRM, Rooholamini H. Evaluating Low-Temperature fracture toughness of steel slag Aggregate-Included asphalt mixture using response surface method. Constr Build Mater 2023;370:130647. https://doi.org/10.1016/j.conbuildmat.2023.130647.
[2] Zadparast SN, Ameri M. Analyzing the Functional Features of HMA Mixtures Containing Multi-Component Polymeric and Glass Fibers. J Civ Eng Mater Appl 2023;7:151–9. https://doi.org/10.22034/jcema.2023.179694.
[3] Nuha S. Mashaan, Ali Rezagholilou, Hamid Nikraz AC. A Review on using Waste Polymer as Additive in Asphalt Mixture. Int J Adv Sci Eng Technol 2019;7.
[4] Rubio MC, Martínez G, Baena L, Moreno F. Warm mix asphalt: an overview. J Clean Prod 2012;24:76–84. https://doi.org/10.1016/j.jclepro.2011.11.053.
[5] Adrianzen Flores OJ, Azula Vásquez JJ, Pacherres Sánchez CF, Rodriguez Lafitte ED, Muñoz Perez SP. Uso de distintos tipos de fibras para mejorar las propiedades mecánicas de la mezcla asfáltica: Una revisión literaria. Infraestruct Vial 2022;24:1–16. https://doi.org/10.15517/iv.v24i43.47931.
[6] Slebi-Acevedo CJ, Lastra-González P, Pascual-Muñoz P, Castro-Fresno D. Mechanical performance of fibers in hot mix asphalt: A review. Constr Build Mater 2019;200:756–69. https://doi.org/10.1016/j.conbuildmat.2018.12.171.
[7] Abtahi SM, Sheikhzadeh M, Hejazi SM. Fiber-reinforced asphalt-concrete – A review. Constr Build Mater 2010;24:871–7. https://doi.org/10.1016/j.conbuildmat.2009.11.009.
[8] Ameri M, Nemati M, Shaker H, Jafari F. Experimental and numerical investigation of the properties of the Hot Mix Asphalt Concrete with basalt and glass fiber. Frat Ed Integrità Strutt 2019;13:149–62. https://doi.org/10.3221/IGF-ESIS.50.14.
[9] Antunes V, Freire AC, Neves J. A review on the effect of RAP recycling on bituminous mixtures properties and the viability of multi-recycling. Constr Build Mater 2019;211:453–69. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.258.
[10] Utilizing Reclaimed Asphalt Pavement (RAP) Materials in New Pavements - A Review. Int J Therm Environ Eng 2017;12. https://doi.org/10.5383/ijtee.12.01.008.
[11] Guo M, Liu H, Jiao Y, Mo L, Tan Y, Wang D, et al. Effect of WMA-RAP technology on pavement performance of asphalt mixture: A state-of-the-art review. J Clean Prod 2020;266:121704. https://doi.org/10.1016/j.jclepro.2020.121704.
[12] Wiśniewski D, Słowik M, Kempa J, Lewandowska A, Malinowska J. Assessment of Impact of Aramid Fibre Addition on the Mechanical Properties of Selected Asphalt Mixtures. Materials (Basel) 2020;13:3302. https://doi.org/10.3390/ma13153302.
[13] Guo F, Li R, Lu S, Bi Y, He H. Evaluation of the Effect of Fiber Type, Length, and Content on Asphalt Properties and Asphalt Mixture Performance. Materials (Basel) 2020;13:1556. https://doi.org/10.3390/ma13071556.
[14] Yang R, Kang S, Ozer H, Al-Qadi IL. Environmental and economic analyses of recycled asphalt concrete mixtures based on material production and potential performance. Resour Conserv Recycl 2015;104:141–51. https://doi.org/10.1016/j.resconrec.2015.08.014.
[15] Ghabchi R, Singh D, Zaman M, Hossain Z. Laboratory characterisation of asphalt mixes containing RAP and RAS. Int J Pavement Eng 2016;17:829–46. https://doi.org/10.1080/10298436.2015.1022778.
[16] Klinsky LMG, Kaloush KE, Faria VC, Bardini VSS. Performance characteristics of fiber modified hot mix asphalt. Constr Build Mater 2018;176:747–52. https://doi.org/10.1016/j.conbuildmat.2018.04.221.
[17] Shu X, Huang B, Vukosavljevic D. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture. Constr Build Mater 2008;22:1323–30. https://doi.org/10.1016/j.conbuildmat.2007.04.019.
[18] Xu S, Xiao F, Amirkhanian S, Singh D. Moisture characteristics of mixtures with warm mix asphalt technologies – A review. Constr Build Mater 2017;142:148–61. https://doi.org/10.1016/j.conbuildmat.2017.03.069.
[19] Stacey D. Diefenderfer, Ph.D., P.E., Ilker Boz, Ph.D., and Jhony Habbouche PD, P.E. Balanced Mix Design for Surface Asphalt Mixtures: Phase I: Initial Roadmap Development and Specification Verification. 2021.
[20] Ziaee SA, Fatemi SS, Shaker H, Ameri M, Saadatjoo SA. Optimization of CLS Content of Asphalt Mixtures Based on Balanced Mix Design Approach. Adv Civ Eng 2023;2023:1–14. https://doi.org/10.1155/2023/7594186.
[21] You J, Xi C, Zhang Z, Fu G, Zhang H. Research on Performance Evaluation of Different Dosages of Hot Recycled Asphalt Mixtures Based on High Temperature Shear Resistance, 2024, p. 30–7. https://doi.org/10.1007/978-981-97-5814-2_3.
[22] Ma T, Wang H, Huang X, Wang Z, Xiao F. Laboratory performance characteristics of high modulus asphalt mixture with high-content RAP. Constr Build Mater 2015;101:975–82. https://doi.org/10.1016/j.conbuildmat.2015.10.160.
[23] Zhao S, Huang B, Shu X, Jia X, Woods M. Laboratory Performance Evaluation of Warm-Mix Asphalt Containing High Percentages of Reclaimed Asphalt Pavement. Transp Res Rec J Transp Res Board 2012;2294:98–105. https://doi.org/10.3141/2294-11.
[24] Mehmood R, Jakarni FM, Muniandy R, Hassim S, Nik Daud NN, Ansari AH. Waste engine oil as a sustainable approach for asphalt rejuvenation and modification: A review. Heliyon 2024;10:e40737. https://doi.org/10.1016/j.heliyon.2024.e40737.
[25] Zhang F, Li H, Zou X, Cui C, Shi Y, Wang H, et al. Performance and Simulation Study of Aged Asphalt Regenerated from Waste Engine Oil. Coatings 2022;12:1121. https://doi.org/10.3390/coatings12081121.
[26] Mamun A Al, Al-Abdul Wahhab HI, Dalhat MA. Comparative Evaluation of Waste Cooking Oil and Waste Engine Oil Rejuvenated Asphalt Concrete Mixtures. Arab J Sci Eng 2020;45:7987–97. https://doi.org/10.1007/s13369-020-04523-5.
[27] Zhang, F., Li, H., Zou, X., Cui, C., Shi, Y., Wang, H., & Yang F. Performance and Simulation Study of Aged Asphalt Regenerated from Waste Engine Oil. Mdpi 2022;12.
[28] Madhu K, J AR, Shibu N, G V. Assessing recycled asphalt pavement: Impact of waste cooking oil and waste engine oil as rejuvenators on mechanical properties. Res Eng Struct Mater 2024. https://doi.org/10.17515/resm2024.218me0325rs.
[29] Majidifard H, Tabatabaee N, Buttlar W. Investigating short-term and long-term binder performance of high-RAP mixtures containing waste cooking oil. J Traffic Transp Eng (English Ed 2019;6:396–406. https://doi.org/10.1016/j.jtte.2018.11.002.
[30] Ziari H, Hajiloo M. The effect of mix design method on performance of asphalt mixtures containing reclaimed asphalt pavement and recycling agents: Superpave versus balanced mix design. Case Stud Constr Mater 2023;18:e01931. https://doi.org/10.1016/j.cscm.2023.e01931.
[31] Tang W, Yu X, Li N, Dong F, Wang Z, Zhang Y. Effect of Rejuvenators on the Workability and Performances of Reclaimed Asphalt Mixtures. Materials (Basel) 2021;14:6385. https://doi.org/10.3390/ma14216385.
[32] Zadparast, S. N., & Ameri M. Analyzing the Functional Features of HMA Mixtures Containing Multi-Component Polymeric and Glass Fibers. J Civ Eng Mater Appl 2023;7:151–9.
[33] Advanced Asphalt Technologies L. A Manual for Design of Hot-Mix Asphalt with Commentary. Washington, D.C.: National Academies Press; 2011. https://doi.org/10.17226/14524.
[34] (AASHTO) AA of SH and TO. Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage. Washington, D.C.: AASHTO; 2000.
[35] Al-Qadi, Imad L.; Ozer, Hasan; Zhu, Zehui; Singhvi, Punit; Mohamed Ali, Uthman; Sawalha, Mohammed; Espinoza Luque, Arturo Francisco; Garcia Mainieri, Javier Jesus; Zehr TG. Development of Long-Term Aging Protocol for Implementation of the Illinois Flexibility Index Test (I-FIT) 2019.
[36] American Association of State Highway and Transportation Officials (AASHTO). Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage. Washington, D.C.: 2021.
[37] Chusilp N, Jaturapitakkul C, Kiattikomol K. Effects of LOI of ground bagasse ash on the compressive strength and sulfate resistance of mortars. Constr Build Mater 2009;23:3523–31. https://doi.org/10.1016/j.conbuildmat.2009.06.046.
[38] American Association of State Highway and Transportation Officials (AASHTO). Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT). Washington, D.C.: 2020.
[39] Georgiou P, Loizos A. Characterization of Sustainable Asphalt Mixtures Containing High Reclaimed Asphalt and Steel Slag. Materials (Basel) 2021;14:4938. https://doi.org/10.3390/ma14174938.
[40] Khorshidi M, Ameri M, Goli A. Cracking performance evaluation and modelling of RAP mixtures containing different recycled materials using deep neural network model. Road Mater Pavement Des 2024;25:716–35. https://doi.org/10.1080/14680629.2023.2222835.
[41] Zhou F, Im S, Sun L, Scullion T. Development of an IDEAL cracking test for asphalt mix design and QC/QA. Road Mater Pavement Des 2017;18:405–27. https://doi.org/10.1080/14680629.2017.1389082. | ||
|
آمار تعداد مشاهده مقاله: 190 تعداد دریافت فایل اصل مقاله: 153 |
||