پیوندهای مفید
آمار
| تعداد نشریات | 22 |
| تعداد شمارهها | 709 |
| تعداد مقالات | 10,213 |
| تعداد مشاهده مقاله | 71,680,432 |
| تعداد دریافت فایل اصل مقاله | 63,496,572 |
Development of a Composite Material Based on a Polymer and Plant Fibers | ||
| Mechanics of Advanced Composite Structures | ||
| مقاله 11، دوره 13، شماره 2 - شماره پیاپی 28، بهمن 2026، صفحه 391-399 اصل مقاله (642.6 K) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22075/macs.2026.36626.1793 | ||
| نویسندگان | ||
| Nassima Dairi1، 2؛ Badrina Dairi* 3، 4؛ Nadira Bellili3، 4؛ Nesrine Ammouchi5؛ Chems El Douha Boulkesrane3؛ Lokmane Ouaoua3 | ||
| 1Department of Industrial Chemical Technology. Institute of Technology. Akli Mohand Oulhadj University (UAMOB), Bouira. Algeria | ||
| 2Department of Macromolecular Chemistry, Faculty of Chemistry, Materials Polymer Laboratory, University of Sciences and Technology Houari Boumediene USTHB, B.P. 32 El-Alia, 16111 Algiers, Algeria | ||
| 3Department of Process Engineering, Faculty of Technology, Skikda University 20 August – 1955 – Algeria | ||
| 4Department of Process Engineering, Faculty of Technology, Laboratory of Advanced Polymer Materials (LMPA), Abderrahmane MIRA University, Béjaïa 06000, Algeria | ||
| 5Laboratory of Physico-Chemistry Research on Surfaces and Interfaces (LRPCSI), University of 20 August 1955 of Skikda, Skikda 21000, Algeria; and Department of Technology, Faculty of Technology, University of 20 August 1955 of Skikda, Skikda 21000, Algeria | ||
| تاریخ دریافت: 30 دی 1403، تاریخ بازنگری: 13 آذر 1404، تاریخ پذیرش: 12 دی 1404 | ||
| چکیده | ||
| The composite materials industry has expanded significantly due to their enhanced performance. However, concerns about the environmental impact of synthetic fibers and petroleum-based polymers have shifted focus toward natural fibers. These fibers are renewable and often biodegradable, making them a sustainable alternative that reduces ecological harm. This shift has paved the way for the development of more eco-friendly composite materials across various industrial applications. This study explores the development of hybrid and non-hybrid composites using high-density polyethylene (HDPE), potato starch, and pomegranate peels. A two-roll mixer and compression molding were employed to fabricate these composites. The findings indicate that incorporating these natural fillers enhances the hardness of the composites. The mechanical results showed that the combination of pomegranate peels/potato starch fillers has a positive effect compared to composites prepared without hybridization. Additionally, the composites exhibit lower density and water absorption properties that vary with the immersion time and the type of filler used. Microscopic analysis reveals that the composite surfaces are heterogeneous and irregular, highlighting the influence of filler distribution. Overall, this research demonstrates the potential of utilizing natural materials in composite production, promoting sustainability while addressing performance needs. Such innovations are essential for reducing the reliance on non-renewable resources and aligning with global efforts to minimize environmental impact. | ||
| کلیدواژهها | ||
| Composite materials؛ Hybrid composites؛ Pomegranate peel؛ Potato starch؛ High density polyethylene | ||
| مراجع | ||
|
[1] Suriani, M. J., Ilyas R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., Azman, M. A., Radzi, F. S. M., Sharma, S, 2021. Critical Review of Natural Fiber Reinforced Hybrid Composites: Processing, Properties, Applications, and Cost. Polymers, 13, pp. 3514. [2] Seydibeyoglu, M. Ö., Dogru, A., Wang, J., Rencheck, M., Han, Y., Wang, L., Seydibeyoglu, E. A., Zhao, X., Ong, K., Shatkin, J. A., Shams es-haghi, S., Bhandari, S., Ozcan, S., Gardner, D. J, 2023. Review on Hybrid Reinforced Polymer Matrix Composites with Nanocellulose, Nanomaterials, and Other Fibers. Polymers, 15, pp. 984. [3] Maurya, A. K. and Manik, G., 2023. Advances towards Development of Industrially Relevant Short Natural Fiber Reinforced and Hybridized Polypropylene Composites for Various Industrial Applications: A Review. J. Polym. Res, 30, pp. 47. [4] Prem Kumar, R., Muthukrishnan, M., Felix Sahayaraj, A., 2023. Effect of Hybridization on Natural Fiber Reinforced Polymer Composite Materials – A Review. Polym. Compos, 44, pp. 4459–4479. [5] Ismail, S. O., Akpan, E., Dhakal, H. N., 2022. Review on Natural Plant Fibres and Their Hybrid Composites for Structural Applications: Recent Trends and Future Perspectives. Compos. C: Open Access, 9, pp. 100322. [6] Neto, J. H., Queiroz, R., Aguiar, R., Lima, D., Cavalcanti, M. A., Doina Banea., 2022. Review of Recent Advances in Hybrid Natural Fiber Reinforced Polymer Composites. J. Renew. Mater, 10, pp. 561–589. [7] Cavus, V., 2020. Selected Properties of Mahogany Wood Flour Filled Polypropylene Composites: The Effect of Maleic Anhydride-GraftedPolypropylene (MAPP). BioRes, 15, pp. 2227–2236. [8] Thakur, V. K. and Thakur, M. K., 2014. Processing and Characterization of Natural Cellulose Fibers/Thermoset Polymer Composites. Carbohydr., Polym., 109, pp. 102–117. [9] Sharma, A., Venkatesh, R., Chaturvedi, R., Kumar R., Vivekananda, P. K. K., Mohanavel, K. V., Soudagar, M. E. M., Al Obaid, S., Salmen, S. H., 2024. Polypropylene Matrix Embedded with Curaua Fiber through Hot Compression Processing: Characteristics Study. J. Polym. Res., 31, pp. 260. [10] Rahman, M. M., Maniruzzaman, M., Yeasmin, M. S., 2023.. A State-of-the-Art Review Focusing on the Significant Techniques for Naturally Available Fibers as Reinforcement in Sustainable Bio-Composites: Extraction, Processing, Purification, Modification, as Well as Characterization Study. Results Eng., 20, pp. 101511. [11] Aravindh, M., Sathish, S., Ranga Raj, R., Karthick, A., Mohanavel, V., Patil, P. P., Muhibbullah, M., Osman, S. M., 2022. A Review on the Effect of Various Chemical Treatments on the Mechanical Properties of Renewable Fiber-Reinforced Composites. Adv. Mater. Sci. Eng, 2022, pp. 1–24. [12] Pathan, S., Dinesh, Biswas, K., Palsule, S., 2022. Recycled Wood Fiber Reinforced Chemically Functionalized Polyethylene (VLDPE) Composites by Palsule Process. J. Nat. Fibers, 19, pp. 15519–15530. [13] Dinesh, Palsule, S., 2021. Bagasse Fiber Reinforced Functionalized Ethylene Propylene Rubber Composites by Palsule Process. J. Nat. Fibers, 18, pp. 1637–1649. [14] Kumar, P. and Palsule, S., 2023. Bamboo Fiber Reinforced Chemically Functionalized Acrylonitrile Butadiene Styrene Composites by Palsule Process. J. Nat. Fibers, 20, pp. 2150741. [15] Tamta, N. and Palsule, S.,2024. Kenaf Fiber Reinforced Chemically Functionalized Styrene-Acrylonitrile Composites. J. Thermoplas. Compos. Mater, 37, pp. 5–27. [16] Verma, H. and Palsule, S., 2024. Bagasse Fiber Reinforced Chemically Functionalized Polystyrene Composites. J. Thermoplas. Compos. Mater, 37, pp. 251–275. [17] Andrzejewski, J., Barczewski, BM. , Czarnecka- Komorowska, D., Rydzkowski, T., Gawdzinska, K., Thakur, V. K., 2024. Manufacturing and Characterization of Sustainable and Recyclable Wood-Polypropylene Biocomposites: Multiprocessing-Properties-Structure Relationships. Ind. Crops Prod, 207, pp. 117710. [18] Caramitu, A. R., Ciobanu, R. C., Ion, I., Marin, M., Lungulescu, E. M., Marinescu, V., Aflori, M., Bors, A. M., 2024. Composites from Recycled Polypropylene and Carboxymethylcellulose with Potential Uses in the Interior Design of Vehicles. Polymers, 16, pp. 2188. [19] Le Duigou, A., Davies, P., Baley, C., 2011. Environmental Impact Analysis of the Production of Flax Fibres to Be Used as Composite Material Reinforcement. J. Biobased Mat. Bioenergy, 5, pp. 153–165. [20] Patel, R. V., Yadav, A., Winczek, J., 2023. Physical, Mechanical, and Thermal Properties of Natural Fiber- Reinforced Epoxy Composites for Construction and Automotive Applications. Appl. Sci, 13, pp. 5126. [21] Nagaraja Ganesh, B. and Muralikannan, R., 2016. Comprehensive Characterization of Lignocellulosic Fruit Fibers Reinforced Hybrid Polyester Composites. International Journal of Materials Science and Applications, 5, pp. 302-307. [22] Nachtigall, M.B., Sonia, Graziela S. Cerveira, Simone M.L. Rosa, 2007. New polymeric-coupling agent for polypropylene/wood-flour composites. Polymer testing, 26, pp. 619-628. [23] Demir, H., Atikler, U., Balkose, D., 2006. The effect of fiber surface treatments on the tensile and water sorption properties of polypropylene–luffa fiber composites. Composites Part A: Applied Science and Manufacturing, 37, pp. 447-456. [24] Khalid, M., Ratnam, C.T., Chuah, T.G., et al., 2008. Comparative study of polypropylene composites reinforced with oil palm empty fruit bunch fiber and oil palm derived cellulose. Materials & Design, 29, pp. 173–178. [25] Kaci, M., Djidjelli, H., Boukerrou, A., Zaidi, L., 2007. Effect of wood filler treatment and EBAGMA compatibilizer on morphology and mechanical properties of low-density polyethylene/olive husk flour composites. Express Polymer Letters, 1, pp. 467–473. [26] Atmakuri, A., Palevicius, A., Kolli, L., Vilkauskas, A., 2021. Development and analysis of mechanical properties of caryota and sisal natural fibers reinforced epoxy hybrid composites. Polymers, 13, pp. 864. [27] Stark, N. M. and Rowlands, R. E., 2003. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood and fiber science, 35, pp. 167- 174. [28] Pasquini, D., Teixeira, E.M., Dufresne, A., 2008. Surface esterification of cellulose fibres: Processing and characterisation of low-density polyethylene/cellulose fibres composites. Composites Science and Technology, 68, pp. 193–201. [29] Dairi, B., Djidjelli, H., Boukerrou, A., 2013. Study and Characterization of Composites Materials Based on Poly(Vinyl Chloride) Loaded with Wood Flour. Journal of Material Sciences & Engineering A, 3, pp. 110-116. [30] Bledzki, A. K. and Faruk, O., 2004. Creep and impact properties of wood fibre/polypropylene composites: influence of température and moisture content. Composites Science and Technology, 64, pp. 693-700. [31] Karmarkar, A., Chauhan, S., Jayant, M., Modak, J., Chanda, M., 2007. Mechanical properties of wood -fîber reinforced polypropylene composites: Effect of a nevel compatibilizer with isocyanate fimctional group. Composites Part A, 38, pp. 227-233. [32] Shinoj, S., Visvanathan, R., Panigrahi, S., 2010. Towards industrial utilization of oil palm fibre: Physical and dielectric characterization of linear low density polyethylene composites and comparison with other fibre sources. Biosystems Engineering, 106, pp. 378-388. [33] Maya Jacob, J. and Rajesh Anandjiwala, D., 2008. Recent Developments in Chemical Modification and Characterization of Natural Fiber-Reinforced Composites. Journal of Polymers and Polymer Composites, 29, pp. 187-207. [34] Georgopoulos, S. TH., Tarantili, P.A., Avgerinos, E., Andreopoulos, A.G., Koukios, E.G., 2005. Thermoplastic polymers reinforced with fibrous agricultural residues. Polymer Degradation and Stability, 90, pp. 303-312. [35] Shenoy, A. V. and Saini, D. R., 1986 Melt flow index: More than just a quality control rheological parameter. Part I. Advances in Polymer Technology, 6, pp. 1-58. [36] Djoudi, T., Hecini, M., Scida, D., 2018. Caractérisation physique et mécanique du bois et des fibres issus d’une palme mûre de palmier dattier. Matériaux & Techniques, 106, pp. 403. [37] Mazur, K., Jakubowska, P., Romanska, P., Kuciel, S., 2020. Green high-density polyethylene (HDPE) reinforced with basalt fiber and agricultural fillers for technical applications. Composites Part B: Engineering, 202, pp. 108-399. [38] Edhirej, A., Sapuan, S., Jawaid, M., Zahari, N., 2017. Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties. International Journal of Biological Macromolecules, 101, pp. 75-83. | ||
|
آمار تعداد مشاهده مقاله: 192 تعداد دریافت فایل اصل مقاله: 130 |
||