[1] M.M. Abutalib and A. Rajeh, Influence of MWCNTs/Li‑doped TiO2 nanoparticles on the structural, thermal, electrical and mechanical properties of poly (ethylene oxide)/poly (methyl methacrylate) composite, J. Organomet. Chem. 918 (2020), no. 1, 121309.
[2] S.R. Akherati Sany, M. Mortezaei, and I. Amiri Amraei, Improving Fracture Toughness of Epoxy Nanocomposites by Silica Nanoparticles, Iran. J. Polymer Sci. Technol. 30 (2017), no. 1, 3-17.
[3] A. Alhotan, J. Yates, S. Zidan, J. Haider, and N. Silikas, Assessing fracture toughness and impact strength of PMMA reinforced with nano‑particles and fibre as advanced denture base materials, Materials 14 (2021), no. 15, 4127.
[4] M.R. Aliha, A. Mousavi, N. Mehri Khansari, and M. Safarabadi, Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite, J. Sci. Technol. Compos. 2 (2015), no. 2, 9-16. [In Persian]
[5] N. Bahramian, M. Atai, and M.R. Naimi‑Jamal, The effect of incorporation of UHMWPE fiber and Silica nanoparticles on mechanical properties of dental Composite resin, Res. Dent. Sci. 13 (2016), no. 3, 122-128.
[6] X. Bai, C. Lin, Y. Wang, J. Ma, X. Wang, X. Yao, and B. Tang, Preparation of Zn doped mesoporous silica nanoparticles (Zn‑MSNs) for the improvement of mechanical and antibacterial properties of dental resin composites, Dental Mater. 36 (2020), no. 6, 794-807.
[7] S. Balos, T. Puskar, M. Potran, B. Milekic, D. Djurovic Koprivica, J. Laban Terzija, and I. Gusic, Modulus, strength and cytotoxicity of PMMA‑silica nanocomposites, Coatings 10 (2020), no. 6, 583, 1-13.
[8] H. Barghamadi, M. Atai, M. Imani, and M. Esfandeh, Effect of amorphous silica nanoparticle size and content on fracture toughness of a highly‑filled dental composite, Res. Dent. Sci. 15 (2018), no. 1, 5-12. [In Persian]
[9] P. Cevik and A.Z. Yildirim‑Bicer, The effect of silica and prepolymer nanoparticles on the mechanical properties of denture base acrylic resin, J. Prosthod. 27 (2018), no. 8, 763-770.
[10] G. Chladek, K. Pakiela, W. Pakiela, J. Zumdzki, M. Adamiak, and C. Krawczyk, Effect of antibacterial silver‑releasing filler on the physicochemical properties of poly (methyl methacrylate) denture base material, Materials 12 (2019), no. 24, 4146.
[11] B.R. De Menezes, A. Da Graça Sampaio, D.M. Da Silva DM, T.L. Do Amaral Montanheiro, C.Y. Koga‑Ito, and G.P. Thim, AgVO3 nanorods silanized with γ‑MPS: An alternative for effective dispersion of AgVO3 in dental acrylic resins improving the mechanical properties, Appl. Surface Sci. 543 (2021), no. 10, 148830, 1-11.
[12] A. Ebrahimzadegan and A. Mohammadpour Fattahi, Experimental study of the water absorption and fatigue life of PMMA/MWCNTs nanocomposites, Modares Mech. Engin. 19 (2019), no. 7, 1819-1825. [In Persian]
[13] N.W. Elshereksi, A. Muchtar, and C.H. Azhari, Effects of nano barium titanate on physical and mechanical properties of poly (methyl methacrylate) denture base nanocomposites, Polymers Polymer Compos. 29 (2021), no. 5, 484-496.
[14] G. Ergun, Z. Sahin, and A.S. Ataol, The effects of adding various ratios of zirconium oxide nanoparticles to poly (methyl methacrylate) on physical and mechanical properties, J. Oral Sci. 60 (2018), no. 2, 304-315.
[15] A. Ersad‑Langroudi and M.H. Akkaf, Improvement in the mechanical properties of polyester nanocomposite with nano‑silica prepared by sol‑gel method, J. Sci. Technol. Compos. 3 (2017), no. 4, 419-428. [In Persian]
[16] A.A. Fatalla, M.S. Tukmachi, and G.H. Jani, Assessment of some mechanical properties of PMMA/silica/zirconia nanocomposite as a denture base material, IOP Conf. Ser.: Mater. Sci. Engin. 987 (2020), no. 6, 1-10.
[17] M.M. Gad, R. Abualsaud, and S.Q. Khan, Hydrophobicity of denture base resins: A systematic review and meta‑analysis, J. Int. Soc. Prevent. Commun. Dent. 12 (2022), no. 2, 139-159.
[18] M.M. Gad, H.A. Bahgat, M.F. Edrees, A. Alhumaidan, S.Q. Khan, and N.M. Ayad, Antifungal activities and some surface characteristics of denture soft liners containing silicon dioxide nanoparticles, J. Int. Soc. Prevent. Commun. Dent. 12 (2022), no. 1, 109-116.
[19] M.M. Gad, S.M. Fouda, F.A. Al‑Harbi, R. Napankangas, and A. Raustia, PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition, Int. J. Nanomed. 12 (2017), no. 1, 3801-3812.
[20] M.A. Golshokouh, N. Refahati, and P.R. Saffari, Effect of silicon nanoparticles on moisture absorption and fracture toughness of polymethyl methacrylate matrix nanocomposites, J. Compos. Sci. 8 (2024), no. 2, 1-12.
[21] K. Hata, H. Ikeda, Y. Nagamatsu, C. Masaki, R. Hosokawa, and H. Shimizu, Dental poly (methyl methacrylate)‑based resin, (2023).
[22] M.M. Karabela and I.D. Sideridou, Synthesis and study of properties of dental resin composites with different nano silica particle size, Dental Mater. 27 (2011), no. 8, 825-835.
[23] S. Karkanis, A.K. Nikolaidis, E.A. Koulouzidou, and D.S. Achilias, Effect of silica nanoparticles silanized by functional/functional or functional/non‑functional silanes on the physicochemical and mechanical properties of dental nanocomposite resins, Appl. Sci. 12 (2021), no. 1, 159-168.
[24] M. Kaseem, Z. Ur Rehman, S. Hossain, A.K. Singh, and B. Dikici, A review on synthesis, properties, and applications of polylactic acid/silica composites, Polymers 13 (2021), no. 18, 30-36.
[25] H. Keda, Y. Nagamatsu, and H. Shimizu, Preparation of silica‑poly (methyl methacrylate) composite with a nanoscale dual‑network structure and hardness comparable to human enamel, Dental Mater. 35 (2019), no. 6, 893-899.
[26] G.H. Kim, S.W. Hwang, B.N. Jung, D. Kang, J.K. Shim, and K.H. Seo, Effect of PMMA/Silica hybrid particles on interfacial adhesion and crystallization properties of Poly (Lactic Acid)/Block acrylic elastomer composites, Polymers 12 (2020), no. 10, 22-31.
[27] V. Kumar, L. Kumar, K. Sehgal, K. Datta, and B. Pal, A comparative evaluation of the effect of reinforced autopolymerizing resin on the flexural strength of repaired heat‑polymerized denture base resin before and after thermocycling, J. Int. Soc. Prevent. Commun. Dent. 7 (2017), no. 8, 99.
[28] F. Kundie, C.H. Azhari, and Z.A. Ahmad, Effect of nano‑ and micro‑alumina fillers on some properties of poly (methyl methacrylate) denture base composites, J. Serbian Chem. Soc. 83 (2018), no. 1, 75-79.
[29] F. Kundie, C.H. Azhari, A. Muchtar, and Z.A. Ahmad, Effects of filler size on the mechanical properties of polymer‑filled dental composites: A review of recent developments, J. Phys. Sci. 29 (2018), no. 1, 141-165.
[30] D.W. Lee and B.R. Yoo, Advanced silica/polymer composites: Materials and applications, J. Ind. Engin. Chem. 38 (2016), no. 10, 1-2.
[31] A. Mousavi, M.R. Aliha, and D.M. Imani, Effects of biocompatible Nanofillers on mixed‑mode I and II fracture toughness of PMMA base dentures, J. Mech. Behav. Biomed. Mater. 103 (2020), no. 1, 103566.
[32] C.M. Mussatto, E.M. Oliveira, K. Subramani, R.M. Papaleo, and E.G. Mota, Effect of silica nanoparticles on mechanical properties of self‑cured acrylic resin, J. Nanopart. Res. 22 (2020), no. 11, 1-10.
[33] N. Rajaee, M. Vojdani, and S. Adibi, Effect of food simulating agents on the flexural strength and surface hardness of denture base acrylic resins, Oral Health Dent. Manag. 9 (2015), no. 12, 1041-1047.
[34] O. Rastegar, M. Dehghani, A. Mehrabani‑Zeinabad, and A. Mohebbi, Investigation of synergistic existence effect of SiO2 and TiO2 nanoparticles in polystyrene nanocomposite and comparison of their mechanical and thermal properties, J. Nanomater. 3 (2011), no. 8, 42-49.
[35] D. Rende, L.S. Schadler, and R. Ozisik, Controlling foam morphology of poly (methyl methacrylate) via surface chemistry and concentration of silica nanoparticles and supercritical carbon dioxide process parameters, J. Chem. 20 (2013), no. 4, 1-22.
[36] B. Ristic and L. Carr, Water sorption by denture acrylic resin and consequent changes in the vertical dimension, J. Prosthetic Dent. 58 (1987), no. 6, 689-693.
[37] B. Ali Sabri, M. Satgunam, N.M. Abreza, and N.A. Abed, A review on enhancements of PMMA denture base material with different nano‑fillers, Cogent Engin. 8 (2021), no. 1, 1875968.
[38] S.I. Salih, J.K. Oleiwi, and A.S. Mohamed, Investigation of mechanical properties of PMMA composite reinforced with different types of natural powders, ARPN J. Engin. Appl. Sci. 13 (2018), no. 22, 8889-8900.
[39] A.D. Salman, G.H. Jani, and A.A. Fatalla, Comparative study of the effect of incorporating SiO2 nano‑particles on properties of poly methyl methacrylate denture bases, Biomed. Pharmacol. J. 10 (2017), no. 3, 21525-21535.
[40] A. Siot, R. Léger, C. Longuet, B. Otazaghine, A.S. Caro‑Bretelle, and N. Azéma, Dispersion control of raw and modified silica particles in PMMA, Impact on mechanical properties, from experiments to modeling, Compos. Part B: Engin. 157 (2019), no. 2, 163-172.
[41] I. Turkcan, A.D. Nalbant, E. Bat, and G. Akca, Examination of 2‑methacryloyloxyethyl phosphorylcholine polymer coated acrylic resin denture base material: Surface characteristics and Candida albicans adhesion, J. Mater. Sci. Mater. Med. 29 (2018), no. 7, 107-118.
[42] C. Thongchom, N. Refahati, P. Roodgar Saffari, P. Roudgar Saffari, M.N. Niyaraki, S. Sirimontree, and S. Keawsawasvong, An experimental study on the effect of nanomaterials and fibers on the mechanical properties of polymer composites, Buildings 12 (2021), no. 7, 1-22.
[43] M. Topouzi, E. Kontonasaki, D. Bikiaris, L. Papadopoulou, K.M. Paraskevopoulos, and P. Koidis, Reinforcement of a PMMA resin for interim fixed prostheses with silica nanoparticles, J. Mech. Behav. Biomed. Mater. 30 (2017), no. 2, 213-222.
[44] M.S. Zafar, Prosthodontic applications of polymethyl methacrylate (PMMA): An update, Polymers 12 (2020), no. 10, 2299.
[45] X. Zhen, L. Zhang, M. Shi, L. Li, L. Cheng, Z. Jiao, W. Yang, and Y. Ding, Mechanical behavior of PMMA/SiO2 multilayer nanocomposites: experiments and molecular dynamics simulation, Macromol. Res. 28 (2020), no. 12, 266-278.
[46] M. Zirak, M. Vojdani, S. Mohammadi, and A.A. Khaledi, Comparison of the water sorption and solubility of four reline acrylic resins after immersion in food‑simulating agents, J. Int. Soc. Prevent. Commun. Dent. 9 (2019), no. 1, 40-53.
[47] H. Zou, S. Wu, and J. Shen, Polymer/silica nanocomposites: preparation, characterization, properties, and applications, Chem. Rev. 108 (2008), no. 9, 3893-3957.
