پیوندهای مفید
آمار
| تعداد نشریات | 21 |
| تعداد شماره‌ها | 610 |
| تعداد مقالات | 9,026 |
| تعداد مشاهده مقاله | 67,082,753 |
| تعداد دریافت فایل اصل مقاله | 7,656,166 |
A Parametric Study on the Progressive Collapse Potential of Steel Buildings under Truck Collision | ||
| Journal of Rehabilitation in Civil Engineering | ||
| مقاله 7، دوره 5، شماره 1 - شماره پیاپی 9، اردیبهشت 2017، صفحه 96-106 اصل مقاله (1.32 M) | ||
| نوع مقاله: Regular Paper | ||
| شناسه دیجیتال (DOI): 10.22075/jrce.2017.10710.1173 | ||
| نویسندگان | ||
| Vahid Broujerdian* 1؛ Mehran Torabi2 | ||
| 1Assistant Professor, Department of Civil Engineering, Iran University of Science and Technology, Tehran, Iran | ||
| 2M.Sc., Department of Civil Engineering, Iran University of Science and Technology, Tehran, Iran | ||
| تاریخ دریافت: 14 اسفند 1395، تاریخ بازنگری: 19 اردیبهشت 1396، تاریخ پذیرش: 25 اردیبهشت 1396 | ||
| چکیده | ||
| In this paper, the initiation and propagation of structural damage in a building due to the truck collision to one of its corner columns were investigated. For this purpose, a three-dimensional 4-story moment resisting steel frame with intermediate ductility was considered. The structure was designed using ETABS software under standard dead, live, and earthquake loads, and then impact loading was applied on the structure using ABAQUS software. The effect of truck collision with different weights and speeds was simulated conducting three-dimensional nonlinear dynamic analyses. The internal stresses and forces created in the directly impacted column, as well as other parts of the structure, were obtained. Using appropriate plasticity models, the shear failure of a steel material was considered. A parametric study was performed in order to investigate the effect of different parameters on the possibility of progressive collapse. To validate the procedure of impact modeling, some available experimental vehicle to column collision tests were simulated. The results revealed that the mass and speed of the impactor had a significant effect on the response of the structure. So that, for high-momentum impactors, the traditional column removal method may yield a good approximation of the behavior of the structure. However, for low-momentum impactors, a time-history analysis without removing the hit column is needed. | ||
| کلیدواژه‌ها | ||
| Progressive collapse؛ Impact؛ Collision؛ ETABS؛ Abaqus | ||
| مراجع | ||
|
[1] ASCE (2013), “Minimum Design Loads for Buildings and Other Structures,” American Society of Civil Engineers. [2] Bažant, Z.P., Verdure, M. (2007). Mechanics of Progressive Collapse: Learning from World Trade Center and Building Demolitions. Journal of Engineering Mechanics, 133: 308-319. [3] Burnett, E.F. (1975). The Avoidance of Progressive Collapse: Regulatory Approaches to the Problem [Final Report]. [4] Mohamed, O.A. (2006). Progressive Collapse of Structures: Annotated Bibliography and Comparison of Codes and Standards. Journal of Performance of Constructed Facilities, 20:418-425. [5] Astaneh-Asl, A., Jones, B., Zhao, Y., Hwa, R. (2001). Progressive Collapse Resistance of Steel Building Floors. Report Number UCB/CEE-Steel-2001. [6] Grierson, D. E., Xu, L., & Liu, Y. (2005). Progressive‐failure analysis of buildings subjected to abnormal loading. Computer‐Aided Civil and Infrastructure Engineering, 20(3), 155-171. [7] Kaewkulchai, G., Williamson, E.B. (2004). Beam Element Formulation and Solution Procedure for Dynamic Progressive Collapse Analysis. Computers & Structures, 639-651. [8] Khandelwal, K., El-Tawil, S., Sadek, F. (2009). Progressive Collapse Analysis of Seismically Designed Steel Braced Frames. Journal of Constructional Steel Research, 65:699-708. [9] Khandelwal, K., & El-Tawil, S. (2011). Pushdown resistance as a measure of robustness in progressive collapse analysis. Engineering Structures, 33(9), 2653-2661. [10] Al-Thairy, H.A., Wang Y.C. (2014). Behaviour and design of steel columns subjected to vehicle impact. Trans Tech Publications, 193-198. [11] Alam, M.I., Fawzia, S. (2015). Numerical studies on CFRP strengthened steel columns under transverse impact. Composite Structures, 428-441. [12] Yousuf, M., Uy, B., Tao, Z., Remennikov, A., Liew, J.R. (2013). Transverse impact resistance of hollow and concrete filled stainless steel columns. Journal of Constructional Steel Research, 177-189. [13] Makarem, F.S., Abed, F. (2013) Nonlinear finite element modeling of dynamic localizations in high strength steel columns under impact. International Journal of Impact Engineering, 47-61. [14] Ari-Gur, J., Weller, T., Singer, J. (1982). Experimental and theoretical studies of columns under axial impact. International Journal of Solids and Structures, 619-641 [15] Menkes, S. B., & Opat, H. J. (1973). Broken beams. Experimental Mechanics, 13(11), 480-486. [16] Chen, F. L., & Yu, T. X. (2000). Influence of axial pre-load on plastic failure of beams subjected to transverse dynamic load. In Key Engineering Materials (Vol. 177, pp. 255-260). [17] Yu, J., & Jones, N. (1989). Numerical simulation of a clamped beam under impact loading. Computers & structures, 32(2), 281-293. [18] Jilin, Y., & Norman, J. (1991). Further experimental investigations on the failure of clamped beams under impact loads. International Journal of Solids and Structures, 27(9), 1113-1137. [19] Yu, J.L. & JONES, N. (1997). Numerical simulation of impact loaded steel beams and the failure criteria. International Journal of Solids and Structures. 34, 3977-4004 [20] Mannan, M. N., Ansari, R., & Abbas, H. (2008). Failure of aluminium beams under low velocity impact. International Journal of Impact Engineering, 35(11), 1201-1212. [21] Bambach, M.R., JAMA, H., ZHAO, X. L. & GRZEBIETA, R. H. (2008). Hollow and concrete filled steel hollow sections under transverse impact loads. Engineering Structures, 30, 2859-2870 [22] INBC 10 (1392). Design and construction of steel structures in Iran. Building and House Research Center, Tehran, Iran. | ||
|
آمار تعداد مشاهده مقاله: 1,286 تعداد دریافت فایل اصل مقاله: 1,074 |
||