یک روش کنترل بدون حسگر جدید برای موتورهای DC بدون جاروبک مبتنی بر شار پیوندی خط به خط

[1] T.Kim, H.Lee, M.Ehsani, “State of the art and future trends in position sensorless brushless DC   motor/generator drives,” 31st Annual Conference of IEEE Industrial Electronics Society( IECON  2005), 2005

.

[2] P.P. Acarnley, J.F. Watson, ” Review of position-sensorless operation of brushless permanent-magnet machines,” IEEE Transactions on Industrial Electronic, Vol.53, No.2, pp.352-362, 2006.

[3] K. Kim, M.youn, ” DSP-Based High-Speed Sensorless Control for a Brushless DC Motor Using a DC Link Voltage Control,” Electric Power Components and Systems, vol.30, no.9, pp.889-906, 2002.

[4]  K. Iizuka, H. Uzuhashi, and M. Kano, “ Microcomputer control for sensorless brushless motor,” IEEE Transaction on Industry Applications, vol. IA-27, pp. 595-601, 1985.

[5] T.Chun, Q.Tran, H.Lee; H.Kim, "Sensorless Control of BLDC Motor Drive for an Automotive Fuel Pump Using a Hysteresis Comparator," IEEE Transactions on Power Electronics, vol.29, no.3, pp. 1382 – 1391, 2014.

[6] P. Damodharan, K.Vasudevan, “Sensorless Brushless DC Motor Drive Based on the Zero-Crossing Detection of Back Electromotive Force (EMF) From the Line Voltage Difference”, IEEE Transaction on Energy Conversion, Vol. 25, No. 3, pp. 661-668, 2010.

[7] J. Moreira, “Indirect Sensing for Rotor Flux Position of Permanent Magnet AC Motors Operating in a Wide Speed Range,” IEEE Transaction Industrial Application, Vol. 32, pp. 401-407,1996.

[8] Z.Q. Zhu, D. Howe, “Sensorless Flux-Weakening Control of Permanent Magnet Brushless Machines Using Third-Harmonic Back-EMF,” IEEE International Electric Machines and Drives Conference, Vol.: 2, pp. 1229 –1235, 2003.

[9] J. X. Shen, and S. Iwasaki, “Improvement of ASIC-Based Sensorless Control for Ultra high-Speed Brushless DC Motor Drive," IEEE international Electric Machines and Drives Conference, pp. 1049-1054, 2003.

[10] T. M. Jahns, R. C. Becerra, M. Ehsani, “Integrated Current Regulation for a Brushless ECM Drive,”  IEEE Trans. Power Electron, vol. 6, pp. 118-126, 1991.

[11] R. C. Becerra, T. M. Jahns, and M. Ehsani, “Four-Quadrant Sensorless Brushless ECM Drive,” in Proceedings Record of IEEE-APEC’9, pp. 202-209, 1991.

[12] D. Regnier, C. Oudet, D. Prudham, “Starting Brushless DC Motors Utilizing Velocity Sensors,” in Proceedings of 14th Annual Symposium on incremental Motion Control Systems and Devices, pp. 99-107, 1985.

[13] D. Peters and J. Hart, “ICs Provide Control for Sensorless DC Motors,” in Proceedings of EDN, pp. 85-94, 1993.

[14] S. Ogasawara, H. Akagi, “An Approach to Position Sensorless Drive for Brushless DC Motors,” IEEE Conference of the Industry Applications Society Annual Meeting, pp. 443 –447, vol.1, 1990.

[15] S. Ogasawara, H. Akagi, “An Approach to Position Sensorless Drive for Brushless DC Motors,” IEEE Transactions on Industry Applications, Vol. 27, No.5, pp. 928 –933, 2001.

[16] N. Ertugrul, P. P. Acarnley, and C. D. French, “Real-Time Estimation of Rotor Position in PM Motors during Transient Operation,” IEE Fifth European Conference on Power Electronics and Applications, pp. 311-316, 1993.

[17] N. Ertugrul and P. Acarnley, “A New Algorithm for Sensorless Operation of Permanent Magnet Motors,” IEEE Transaction Industrial Application, vol. 30, pp. 126-133, 1994.

[18] L.I. Iepure, I. Boldea, G.D. Andreescu, D.Iles, F. Blaabjerg, “Novel motion sensorless control of single phase brushless D.C. PM motor drive, with experiments,” International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), pp.329-336, 2010.

[19] L.I.Iepure, I.Boldea, G.D.Andreescu, F.Blaabjerg. “Improved state observers for sensorless single phase BLDC-PM motor drives,” IECON 2010 - 36th Annual Conference of IEEE Industrial Electronics Society, pp.870-875, 2010.

[20] W. Juan, M. Dixon, H. Rodrigo, “Simplified Sensorless Control for BLDC Motor, Using DSP Technology,” 19’th Electric Vehicle Symposium,  pp. 1431-1442,  2002

.

[21] T.Kim, and M.Ehsani, “Sensorless Control of the BLDC Motors From Near-Zero to High Speeds," IEEE Transactions on Power Electronics, Vol. 19, No. 6, pp.1635-1645, 2004.

[22] T.Kim, M.Ehsani, “An Error analysis of the Sensorless Position Estimation for BLDC Motors,” 38^th IAS Annual Industry Applications Conference, pp. 611-617, 2003.

[23] G. H. Jang, J. H. Park, and J. H. Chang, “Position detection and startup algorithm of a rotor in a sensorless BLDC motor utilising inductance variation,” IEE proceedings -Electric Power Applications, Vol. 149, No. 2, pp. 137–142,  2002.

[24] M. Yilmaz, R. Tuncay, O. Ustun, T. Krein, “Sensorless Control of Brushless DC Motor Based on Wavelet Theory,” Electric Power Components and Systems, Vol.37, No.10, pp.1063-1080, 2009.

[25] L. A. Jonesand and J. H. Lang, “A State Observer for the Permanent Magnet Synchronous Motor," IEEE Transactions on Industrial Electronics, Vol. 36, No.3, pp. 374-382, 1989.

[26] T. Furuhashi, S. Sangwongwanich, S. Okuma, “A Position-and-Velocity Sensorless Control for Brushless DC Motors Using an Adaptive Sliding Mode Observer," IEEE Transactions on Industrial Electronics, Vol. 39, No. 2, pp. 89-95, 1992.

[27] H. Fakham, M.Djemai, K. Busawon, "Design and practical implementation of a back-emf sliding-mode observer for a brushless dc motor," IET Electric Power Applications,  Vol.2, No.6, pp.353,361, 2008.

[28] W.J. Lee, S.k. Su, ” A New Starting Method of BLDC Motors without Position Sensor,” IEEE Transactions on Industry Applications, Vol. 42, No. 6, pp. 1532 – 1538, 2006.