[1] Y. Xuan, W. Roetzel, “Conceptions for Heat Transfer Correlation of Nanofluids”, International Journal of
Heat and Mass Transfer, Vol. 43, No. 19, 2000, pp. 3701-3707.
[2] Y. Xuan, Q. Li, “Investigation on convective heat transfer and flow features of nanofluids”, J. Heat Transfer,
Vol. 125, No. 1, 2003, pp. 151-155.
[3] S.U.S. Choi, “Enhancing thermal conductivity of fluids with nanoparticles”, Proceedings of the1995 ASME
International Mechanical Engineering Congress and Exposition, San Francisco, USA, ASME, FED
231/MD 66, 1995, pp. 99-105.
[4] K.V. Wong, and M.J. Castillo, “Heat Transfer Mechanisms and Clustering in Nanofluids”, Department of
Mechanical and Aerospace Engineering, University of Miami, Coral Gables, FL 33124, USA, 2009.
[5] Ph. Keblinski, S.R. Phillpot, S.U.S. Choi, and J.A. Eastman, “Mechanisms of heat flow in suspensions of
nano-sized particles (nanofluids)”, International journal of heat and mass transfer, Vol. 45, No. 4, 2002,
pp. 855-863.
[6] X. Zhang, H. Gu, and M. Fujii, “Effective thermal conductivity and thermal diffusivity of nanofluids
containing spherical and cylindrical nanoparticles”, Experimental Thermal and Fluid Science, Vol. 31,
No. 6, 2007, pp. 593-599.
[7] S.U.S. Choi, and J.A. Eastman, “Enhancing thermal conductivity of fluids with nanoparticles”, International
mechanical engineering congress and exhibition, San Francisco, CA (United States), 12-17 Nov 1995.
[8] A.K. Singh, “Thermal Conductivity of Nanofluids”, Defense Science Journal, Vol. 58, No. 5, 2008, pp. 600-
607.
[9] J.C. Maxwell, “A Treatise on Electricity and Magnetism”, 1st Edition, Vol. 1, Clarendon Press, Oxford, U.K.,
1873, pp. 360–366.
[10] B.Ch., Pak and Y.I. Cho, “Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles”, Experimental Heat Transfer an International Journal, Vol. 11, No. 2, 1998, pp. 151-170.
[11] D.A. Drew, and S.L. Passman, “Theory of multicomponent fluids, Applied Mathematical Sciences, Vol. 135, 1999.
[12] S.Sh. Hosseini, A. Shahrjerdi, and Y. Vazifeshenas, “A Review of Relations for Physical Properties of Nanofluids”, Australian Journal of Basic & Applied Sciences, Vol. 5, No. 10, 2011, pp. 417-435.
[13] Y. Xuan, and Q. Li, “Heat transfer enhancement of nanofluids”, International Journal of Heat and Fluid Flow, Vol. 21, No. 1, 2000, pp. 58-64.
[14] D. Salari, A. Niaei, P. Chitsaz Yazdi, and M. Derakhshani, “CFD flow and heat transfer simulation for empty and packed fixed bed reactor in catalytic cracking of naphtha”, International Journal of Chemical and Biological Engineering, Vol. 1, No. 1, 2008, pp. 50-53.
[15] C.G. du Toit, P.G. Rousseau, G.P. Greyvenstein, W.A. Landman, “A systems CFD model of a packed bed high temperature gas-cooled nuclear reactor”, International Journal of Thermal Sciences, Vol. 45, No. 1, 2006, pp. 70–85.
[16] Y. Hirayama, H. Okada, T. Nakagawa, T.A. Yamamoto, T. Kusunose, T. Numazawa, K. Mastumoto, T. Irie, and E. Nakamura, “Experimental Study of Active MagneticRegenerator (AMR) Composed ofSpherical GdN”, International cryocooler conference, ink, boulder, co., 2011.
[17] H. Peng, H. Dong, and L. Xiang, “Thermal investigation of PCM-based high temperature thermal energy storage in packed bed”, Energy Conversion and Management, Vol. 81, 2014, pp. 420-427.
[18] H. Kim, G. DeWitt, T. McKrell, J. Buongiorno, and L. Hu, “On the quenching of steel and zircaloy spheres in water-based nanofluids with alumina, silica and diamond nanoparticles”, International Journal of Multiphase Flow, Vol. 35, No. 5, 2009, pp. 427-438.
[19] M.T. Dalman, J.H. Merkin, and C. McGreavy, “Fluid flow and heat transfer past two spheres in a cylindrical tube”, Computers &fluids, Vol. 14, No. 3, 1986, pp. 267-281.
[20] B. Lloyd, and R. Boehm, “Flow and heat transfer around a linear array of spheres, Numerical Heat Transfer”, Part A. Applications, Vol. 26, No. 2, 1944, pp. 237-252, 1994.
[21] O.R. Derkx, and A.G. Dixon, “Determination of the fixed bed wall heat transfer coefficient using computational fluid dynamics, Numerical Heat Transfer”, Part A. Applications, Vol. 29, No. 8, 1996, pp. 777-794.
[22] S.A. Logtenberg and A.G. Dixon, “Computational fluid dynamics studies of fixed bed heat transfer”, Chemical Engineering and Processing, Process Intensification, Vol. 37, No. 1998, pp. 1 7-21.
[23] S. Mansoorzadeh, C.C. Pain, C.R.E. De Oliveira, and A.J.H. Goddard, “Finite element simulations of incompressible flow past a heated/cooled sphere”, International journal for numerical methods in fluids, Vol. 28, No. 6, 1998, pp. 903-915.
[24] D. Wen, and Y. Ding, “Heat transfer of gas flow through a packed bed”. Chemical Engineering Science, Vol. 61, No. 11, 2006, pp. 3532-3542.
[25] O. Laguerre, S. Ben Amara, G. Alvarez, and D. Flick, “Transient heat transfer by free convection in a packed bed of spheres: Comparison between two modelling approaches and experimental results”, Applied Thermal Engineering, Vol. 28, No. 1, 2008, pp. 14-24.
[26] S. Ergun, “Fluid flow through packed columns”, Chemical Engineering Progress, Vol. 48, 1952, pp. 89–94.
[27] R.K. Reddy, and J.B. Joshi, “CFD modeling of pressure drop and drag coefficient in fixed beds: wall effects”, Particuology, Vol. 8, No. 1, 2010, pp. 37-43.
[28] G.S. Rao, K.V. Sharma, S.P. Chary, R.A. Bakar, M.M. Rahman, K. Kadirgama, and M.M. Noor, “Experimental study on heat transfer coefficient and friction factor of Al2O3 nanofluid in a packed bed column”, Journal of Mechanical Engineering and Sciences, Vol. 1, No. 1, 2011, pp. 1-15.
[29] W.E. Ranz, and W.R. Marshall, “Evaporation from drops”, Chem. Eng. Prog., Vol. 48, No. 3, 1952, pp. 141-146.
[30] S. Whitaker, “Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles”, AIChE Journal, Vol. 18, No. 2, 1972, pp. 361-371.
[31] S.J.P. Romkes, F.M. Dautzenberg, van den C.M. Bleek, H.P.A. Calis, “CFD modelling and experimental validation of particle-to-fluidmass and heat transfer in a packed bed at very low channelto particle diameter ratio”, Chemical Engineering Journal, Vol. 96, 2003, pp. 3–13.
[32] M. Kao, Y. Tsung, H. Tung, Y.M. Ferng, Ch.Ch. Chieng, and M.K. Chyu, “3D measurements and numerical computations of heat transfer coefficients on spheres in an array”, International Journal of Thermal Sciences, Vol. 68, 2013, pp. 110-118.
[33] Frank P. Incropera, “Fundamentals of heat and mass transfer”. John Wiley & Sons, 7 th ed, New York, USA, 2011.
[34] W.L. McCabe, J.C. Smith, and P. Harriott, “Unit operations of chemical engineering, McGraw-Hill”, Vol. 5. New York, USA, 1993.
[35] J.p. Holman, “Heat Transfer, McGraw-Hill Series in Mechanical Engineering”, 10 th ed, New York, USA, 2009.
