Numerical Investigation of Roofing Materials Effect on Solar Heat Gain in Different External Conditions

[1] B. Yesilata, H. Bulut, P. Turgut, “Experimental study on thermal behavior of a building structure using rubberized exterior-walls,” Energy and Buildings, 43(2-3), 393-399, (2011).

[2] C. Martins, P. Santos, L.S. da Silva, “Lightweight steel-framed thermal bridges mitigation strategies: A parametric study,” Journal of Building Physics, 39(4), 342-372, (2016).

[3] Z. Yılmaz, “Evaluation of energy efficient design strategies for different climatic zones: Comparison of thermal performance of buildings in temperate-humid and hot-dry climate,” Energy and buildings, 39(3), 306-316, (2007).

[4] C. Balaras, “The role of thermal mass on the cooling load of buildings. An overview of computational methods,” Energy and Buildings, 24(1), 1-10, (1996).

[5] S. Maneewan, J. Khedari, B. Zeghmati, J. Hirunlabh, J. Eakburanawat, “Investigation on generated power of thermoelectric roof solar collector,” Renewable Energy, 29 (5), 743-752, (2004).

[6] J. Han, L. Lu, H. Yang, “Investigation on the thermal performance of different lightweight roofing structures and its effect on space cooling load,” Applied Thermal Engineering, 29(11-12), 2491-2499, (2009).

[7] T. Runsheng, Y. Etzion, E. Erell, “Experimental studies on a novel roof pond configuration for the cooling of buildings,” Renewable Energy, 28(10), 1513-1522, (2003).

[8] K. Vijaykumar, P. Srinivasan, S. Dhandapani, “A performance of hollow clay tile (HCT) laid reinforced cement concrete (RCC) roof for tropical summer climates,” Energy and Buildings, 39(8), 886-892, (2007).

[9] A. Sharifi, Y. Yamagata, “Roof ponds as passive heating and cooling systems: A systematic review,” Applied energy, 160, 336-357, (2015).

[10] N. Daouas, “Impact of external longwave radiation on optimum insulation thickness in Tunisian building roofs based on a dynamic analytical model,” Applied Energy, 177, 136-148, (2016).

[11] J. Yu, L. Tian, C. Yang, X. Xu, J. Wang, “Optimum insulation thickness of residential roof with respect to solar-air degree-hours in hot summer and cold winter zone of china,” Energy and Buildings, 43(9), 2304-2313, (2011).

[12] S.M. Heibati, F. Atabi, M. Khalajiassadi, A. Emamzadeh, “Integrated dynamic modeling for energy optimization in the building: Part 1: The development of the model,” Journal of Building Physics, 37(1), 28-54, (2013).

[13] S. Mohammad, A. Shea, “Performance evaluation of modern building thermal envelope designs in the semi-arid continental climate of Tehran,” Buildings, 3(4), 674-688, (2013).

[14] Bureau for Compiling and Promoting National Regulations for Buildings; Code No. 19, Isfahan, Iran, (2010).

[15] R. Fayaz, B.M. Kari, “Comparison of energy conservation building codes of Iran, Turkey, Germany, China, ISO 9164 and EN 832,” Applied Energy, 86(10), 1949-1955, (2009).

[16] G. Barrios, G. Huelsz, J. Rojas, “Thermal performance of envelope wall/roofs of intermittent air-conditioned rooms,” Applied Thermal Engineering, 40, 1-7, (2012).

[17] C. Mackey, L. Wright, “Periodic heat flow—composite walls or roofs”, ASHVE Transactions, 52(283), 194-196, (1946).

[18] E. Al-Regib, S.M. Zubair, “Transient heat transfer through insulated walls,” Energy, 20(7), 687-694, (1995).

[19] S.A. Al-Sanea, “Thermal performance of building roof elements”, Building and Environment, 37(7), 665-675, (2002).

[20] H. Asan, “Numerical computation of time lags and decrement factors for different building materials,” Building and Environment, 41(5), 615-620, (2006).

[21] S.F. Larsen, C. Filippín, G. Lesino, “Thermal behavior of building walls in summer: Comparison of available analytical methods and experimental results for a case study,” Building Simulation, 2(1), 3-18, (2009).

[22] H. Asan, Y. Sancaktar, “Effects of wall's thermophysical properties on time lag and decrement factor,” Energy and Buildings, 28(2), 159-166, (1998).

[23] H. Asan, “Investigation of wall's optimum insulation position from maximum time lag and minimum decrement factor point of view,” Energy and Buildings, 32(2), 197-203, (2000).

[24] K. Kontoleon, E. Eumorfopoulou, “The influence of wall orientation and exterior surface solar absorptivity on time lag and decrement factor in the Greek region,” Renewable Energy, 33(7),1652-1664, (2008).

[25] L.E. Mavromatidis, M.E. Mankibi, P. Michel, M. Santamouris, “Numerical estimation of time lags and decrement factors for wall complexes including Multilayer Thermal Insulation, in two different climatic zones,” Applied Energy, 92, 480-491, (2012).

[26] L. Zhang, J. Zhang, F. Wang, Y. Wang, “Effects of wall masonry layer’s thermophysical properties and insulation position on time lag and decrement factor,” Indoor and Built Environment, 25(2), 371-377, (2016).

[27] G. Athanassouli, P. Massouros, “A model of the thermal restoration transient state of an opaque wall after the interruption of solar radiation,” Solar energy, 66(1), 21-31, (1999).

[28] S.F. Larsen, G. Lesino, “A new code for the hour-by-hour thermal behavior simulation of buildings,” Proceedings of VII International Building Simulation Congress (Brazil), 75-82, (2001).

[29] A. Al-Turki, G. Zaki, “Cooling load response for building walls comprising heat storing and thermal insulating layers”, Energy Conversion and Management, 32 (3), 235-247, (1991).

[30]Available from: https://energyplus.net/weather/sources

[31] G.N. Walton, Thermal analysis research program reference manual, National Bureau of Standards, (1983).

[32] H. Suehrcke, E.L. Peterson, N. Selby, “Effect of roof solar reflectance on the building heat gain in a hot climate”, Energy and Buildings, 40(12), 2224-2235, (2008).

[33] H. Shen, H. Tan, A. Tzempelikos, “The effect of reflective coatings on building surface temperatures, indoor environment and energy consumption—An experimental study”, Energy and Buildings, 43(2-3), 573-580, (2011).

[34] American Society of Heating, Air-Conditioning and Refrigeration Engineers, Inc, ASHRAE Handbook, Fundamentals, Atlanta, (2005).

[35] M. Ozel, K. Pihtili, “Optimum location and distribution of insulation layers on building walls with various orientations”, Building and Environment, 42(8), 3051-3059, (2007).

[36] Energyplus, EnergyPlus Engineering Reference, (2010).

[37] W. Hayt, Engineering circuit analysis, 8th Ed, New York, McGraw-Hill, (2012).