Calibration of Bar-Concrete Bond Stress Relationships for Bond Stress Prediction of GFRP Soil Nails Using Experimental Pullout Tests

[1]     Xu, K., Ren, C., Deng, Q., Jin, Q., Chen, X. (2018). Real-time monitoring of bond slip between GFRP bar and concrete structure using piezoceramic transducer-enabled active sensing, Sensors, 18: 2653.

[2]     Zhang, C., Zhou, H., Shi, B., Wu, F., Yin, J. (2015). Experimental investigation of pullout behavior of Fiber-Reinforced Polymer reinforcements in sand, Journal of Composite for Construction, 19: 04014062.

[3]     Yan, F., Lin, Z., Wang, X., Azarmi, F., Sobolev, K. (2017). Evaluation and prediction of bond strength of GFRP-bar reinforced concrete using artificial neural network optimized with genetic algorithm, Composite Structures, 161:441-452.

[4]     Refai, A., Abed, F., Altalmas, A. (2014). Bond durability of basalt fiber reinforced polymer bars embedded in concrete under direct pullout conditions, Journal of Composites for Construction.

[5]     El Refai, A., Ammar, M. A., Masmoudi, R. (2014). Bond performance of basalt fiber-reinforced polymer bars to concrete, Journal of Composites for Construction, 19: 04014050.

[6]     Okelo, R., Yuan, R.L. (2005). Bond strength of Fiber Reinforced Polymer rebar in Normal Strength Concrete, Journal of Composites for Construction, 9:203-213.

[7]     Özkal, F. M., Polat, M., Yağan, M., Öztürk, M. O. (2018). Mechanical properties and bond strength degradation of GFRP and steel rebars at elevated temperatures, Construction and Building Materials, 184:45-57.

[8]     Maranan, G., Manalo, A., Karunasena, K., Benmokrane, B. (2015). Bond stress-slip behavior: case of GFRP bars in Geopolymer concrete, Journal of Materials in Civil Engineering, 27:04014116.

[9]     Esfahani, M.R., Rakhshanimehr, M., Mousavi, S.R. (2013). Bond Strength of Lap-Spliced GFRP bars in concrete beams, Journal of Composites for Construction, 17:314-323.

[10]    Mostofinejad, D., Mofrad, M. H., Hosseini, A., Mofrad, H. H. (2018). Investigating the effects of concrete compressive strength, CFRP thickness and groove depth on CFRP-concrete bond strength of EBROG joints, Construction and Building Materials, 189:323-337.

[11]    Liu, H., Yang, J., Wang, X. (2017). Bond behavior between BFRP bar and recycled aggregate concrete reinforced with basalt fiber, Construction and Building Materials, 135:477-483.

[12]    Tekle, B.H., Khennane, A., Kayali, O. (2016). Bond Properties of Sand-Coated GFRP Bars with Fly Ash–Based Geopolymer Concrete, Journal of Composites for Construction, 20:04016025.

[13]    Esfahani, M.R., Kianoush, M.R., Lachemi, M. (2005). Bond strength of Glass Fiber Reinforced Polymer reinforcing bars in Normal and Self-Consolidating Concrete, Canadian Journal in Civil Engineering, 32:553-560.

[14]    Dong, Z.Q., Wu, G., Xu, Y.Q. (2017). Bond and Flexural Behavior of Sea Sand Concrete Members Reinforced with Hybrid Steel-Composite Bars Presubjected to Wet-Dry Cycles, Journal of Composites for Construction, 21:04016095.

[15]    Imjai, T., Guadagnini, M., Pilakoutas, K. (2017). Bond Strength of FRP Bars: Experimental Investigation and Bond Modeling, Journal of Materials in Civil Engineering, 29:04017024.

[16]    Bywalski, C., Drzazga, M., Kaminski, M., Kazmierowski, M. (2016). Analysis of calculation methods for bending concrete elements reinforced with FRP bars, Archives of Civil and mechanical Engineering, 16:901-912.

[17]    Qeshta, I.M., Shafigh, P., Jumaat, M.Z. (2016). Research progress on the flexural behaviour of externally bonded RC beams, Archives of Civil and mechanical Engineering, 16:982-1003.

[18]    Gooranorimi, O., Claure, G., Suaris, W., Nanni, A. (2018). Bond-slip effect in flexural behavior of GFRP RC slabs, Composite Structures, 193:80-86.

[19]    Al-Saadi, N. T. K., Mohammed, A., Al-Mahaidi, R. (2018). Bond performance of NSM CFRP strips embedded in concrete using direct pull-out testing with cementitious adhesive made with graphene oxide, Construction and Building Materials, 162:523-533.

[20]    Bedon, C., Louter, C. (2018). Numerical investigation on structural glass beams with GFRP-embedded rods, including effects of pre-stress, Composite Structures, 184:650-661.

[21]    Carvalho, E.P., Miranda, M.P., Fernandes, D., Victor Alves, G. (2018). Comparison of test methodologies to evaluate steel-concrete bond strength of thin reinforcing bar, Construction and Building Materials, 183:243-252.

[22]    Soroushian, P., Choi, K.B. (1989). Local bond of deformed bars with different diameters in confined concrete, ACI Structural Journal, 86:217–222.

[23]    Eligehausen, R., Popov, E.P., Bertero, V.V. (1982). Local bond stress-slip relationships of deformed bars under generalized excitations, Earthquake Engineering Research Center, University of California, Berkeley.

[24]    Mousavi, S. S., Dehestani, M., Mousavi, K. K. (2017). Bond strength and development length of steel bar in unconfined self-consolidating concrete, Engineering Structures, 131:587-598.

[25]    Esfahani, M.R., Kianoush, M.R. (2005). Development/splice length of reinforcing bars, ACI Structural Journal, 102:22-30.

[26]    Esfahani, M.R., Rangan, B.V. (1998). Local bond strength of reinforcing bars in Normal Strength and High-Strength Concrete (HSC), ACI Structural Journal, 95:96-105.

[27]    Esfahani, M.R., Rangan, B.V. (1998b). Bond between Normal Strength and High-Strength Concrete (HSC) and reinforcing bars in splices in beams, ACI Structural Journal, 95:272-279.

[28]    Soroushian, P., Choi, K.B., Park, G.H., Aslani, F. (1991). Bond of deformed bars to concrete: effects of confinement and strength of concrete, ACI Material Journal, 88:227–232.

[29]    Abrishami, H., Mitchell, D. (1996). Analysis of bond stress distribution in pullout specimens, Journal of Structural Engineering, 122:255-261.

[30]    Ma, Y., Guo, Z., Wang, L., Zhang, J. (2017). Experimental investigation of corrosion effect on bond behavior between reinforcing bar and concrete, Construction and Building Materials, 152:240-249.

[31]    Siamphukdee, K., Zou, R., Collins, F., Shayan, A. (2018). Modeling Steel-Concrete Bond Strength Depletion during Corrosion, ACI Materials Journal, 115.

[32]    Yuan, F., Chen, M. (2018). Numerical sensing of plastic hinge regions in concrete beams with hybrid (FRP and steel) bars, Sensors, 18:3255.

[33]    Achillides, Z., Pilakoutas, K. (2004). Bond behavior of Fiber Reinforced Polymer bars under direct pullout conditions, Journal of Composites for Construction, 8:173-181.

[34]    Tighiouart, B., Benmokrane, B., Gao, D. (1998). Investigation of bond in concrete member with fiber reinforced polymer (FRP) bars, Construction and Building Materials, 12:453-462.

[35]    Yu, S., Zhu, W., Niu, L., Zhou, S., Kang, P. (2019). Experimental and numerical analysis of fully grouted long rockbolt load-transfer behavior, Tunnelling and Underground Space Technology, 85:56-66.

[36]    Liu, H., Tang, L., Lin, P. (2018). Estimation of ultimate bond strength for soil nails in clayey soils using maximum likelihood method, Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 12:190-202.

[37]    Dybel, P., Furtak, K. (2016). The effect of ribbed reinforcing bars location on their bond with high-performance concrete, Archives of Civil and mechanical Engineering, 15:1070-1077.

[38]    Seo, H.J. Jeong, K.H., Choi, H., Lee, I.M. (2012). Pullout resistance increase of soil nailing induced by pressurized grouting, Journal of Geotechnical and Geoenvironmental Engineering, 138:604-613.

[39]    Lee, S.W., Kim, T.S., Sim, B.K., Kim, J.S., Lee, I.M. (2012). Effect of pressurized grouting on pullout resistance and group efficiency of compression ground anchor, Canadian Geotechnical Journal, 49:939-953.

[40]    Su, L.J., Yin, J.H., Zhou, W.H. (2010). Influences of overburden pressure and soil dilation on soil nail pull-out resistance, Computers and Geotechnics, 37:555-564.

[41]    Xu, D. S., Liu, H. B., Luo, W. L. (2018). Evaluation of interface shear behavior of GFRP soil nails with a strain-transfer model and distributed fiber-optic sensors, Computers and Geotechnics, 95:180-190.

[42]    Zhang, B., Benmokrane, B., Ebead, U.A. (2006). Design and evaluation of Fiber-Reinforced Polymer bond-type anchorages and ground anchors, International Journal of Geomechanics, 6:166-175.

[43]    Zou, W.L., Wang, X.Q., Vanapalli, K. (2016). Experimental evaluation of engineering properties of GFRP screw anchors for anchoring applications, Journal of Materials in Civil Engineering, 28:04016029.

[44]    Kou, H.l., Guo, W., Zhang, M.Y. (2015). Pullout performance of GFRP anti-floating anchor in weathered soil, Tunneling and underground space technology, 49:408-416.

[45]    Zheng, J.J., Dai, J.G. (2014). Analytical solution for the full-range pull-out behavior of FRP ground anchors, Construction and Building materials, 58: 129-137.

[46]    Malvar, LJ. (1994). Bond stress-slip characteristics of FRP rebar, Naval Facilities Engineering Service Center, California.

[47]    Cosenza, E., Manfredi, G., Realfonzo, R. (1995). Analytical modelling of bond between FRP reinforcing bars and concrete, In: Nonmetallic (FRP) reinforcement for concrete structures, E&FN Spon, London, 164–171.

[48]    Devore, J.L. (2011). Probability and Statistics for Engineering and the Sciences, Cengage Learning, 8th edition, Boston.

[49]    Barnston, A. (1992). Correspondence among the Correlation [root mean square error] and Heidke Verification Measures; Refinement of the Heidke Score, Notes and Correspondence, Climate Analysis Center.

[50]    Gnananandarao, T., Dutta, R. K., Khatri, V. N. (2019). Application of Artificial Neural Network to Predict the Settlement of Shallow Foundations on Cohesionless Soils, Geotechnical Applications, 13:51-58