Strength Assessment of Steel Fibre Reinforced Recycled Aggregate Concrete by Means of Correlation between Ultrasonic and Point Load Tests

[1] Madandoust, R., Kazemi, M. (2017). “Numerical analysis of break-off test method on concrete.” Construction and Building Materials, Vol. 151, pp. 487–493.

[2] Soares, D., de Brito, J., Ferreira, J., Pacheco, J. (2014). “In situ materials characterization of full-scale recycled aggregates concrete structures.” Construction and Building Materials, Vol. 71, pp. 237–245.

[3] Kazemi, M., Madandoust, R., de Brito, J. (2019). “Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing.” Construction and Building Materials, Vol. 224, pp. 630–638.

[4] Brozovsky, J., Bodnarova, L., Brozovsky Jr, J. (2019). “Rebound hammer tests of high-strength concrete: effects of internal stress and the shape of the impact area of the test specimens on the measurement results”, Periodica Polytechnica Civil Engineering, Vol. 63, Issue 1, pp. 215–221.

[5] ISRM (1985). “Suggested method for determining point load strength.” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 22, Issue 2, pp. 51-60.

[6] Bungey, J.H., Millard, S.G. (2006). “Testing of concrete in structures.” (4^th ed., p. 352). London: Taylor & Francis.

[7] Robins, P.J. (1980). “Point load strength test for concrete cores.” Magazine of Concrete Research, Vol. 32, Issue. 111, pp. 101–111.

[8] Madandoust, R., Bazkiyaei, Z.F.Z., Kazemi, M. (2018). “Factor influencing point load tests on concrete.” Asian Journal of Civil Engineering, Vol. 19, Issue. 8, pp. 937–947, 2018.

[9] Ishibashi, K., Zacoeb, A., Ito, Y. (2008). “Influence of coarse aggregate size on the estimation of compressive strength of concrete by point load testing.” Journal of Structures and Materials in Civil Engineering, Vol. 24, pp. 108–115.

[10] Hussain, A., Akhtar, S. (2017). “Review of non-destructive tests for evaluation of historic masonry and concrete structures.” Arabian Journal for Science and Engineering, Vol. 42, pp. 925–940.

[11] Parker, W.E. (1953). “Pulse velocity testing of concrete.” Proceedings - American Society for Testing Materials, Vol. 53, pp. 1033–1042.

[12] Turgut, P. (2004). “Research into the correlation between concrete strength and UPV values.” NDT.net. Vol. 12, Issue. 12.

[13] Taherkhani, H. (2015). “Evaluation of the physical properties of unbound base layer containing recycled aggregates.” International Journal of Environmental Science and Development, Vol. 6, Issue 4, pp. 279–285.

[14] Saberian, M., Li, J., Nguyen, B.T., Setunge, S. (2019). “Estimating the resilient modulus of crushed recycled pavement materials containing crumb rubber using Clegg impact value.” Resources, Conservation and Recycling, Vol. 141, pp. 301–307.

[15] Frondistou-Yannas, S. (1981). “Economics of concrete recycling in the United States.” Adhesion Problems in the Recycling of Concrete, Vol. 4, pp. 163–185.

[16] Huda, S.B., Alam, M.S. (2014). “Mechanical behavior of three generations of 100% repeated recycled coarse aggregate concrete.” Construction and Building Materials, Vol. 65, Issue. 4, pp. 574–582.

[17] Kazemi, M., Courard, L. (2020). “Modelling thermal and humidity transfers within green roof systems: effect of rubber crumbs and volcanic gravel” Advances in Building Energy Research, pp. 1-26.

[18] Saberian, M., Li, J., Nguyen, B.T., Wang, G. (2018a). “Permanent deformation behaviour of pavement base and subbase containing recycle concrete aggregate, coarse and fine crumb rubber.” Construction and Building Materials, Vol. 178, pp. 51–58.

[19] Li, J. Saberian, M., Nguyen, B.T. (2018). “Effect of crumb rubber on the mechanical properties of crushed recycled pavement materials.” Journal of Environmental Management, Vol. 218, pp. 291–299.

[20] Abed, M., Nemas, R. (2019). “Mechanical properties of recycled aggregate self-compacting high strength concrete utilizing waste fly ash, cellular concrete and perlite powders.” Periodica Polytechnica Civil Engineering, Vol. 63, Issue.1, pp. 266–277.

[21] Kazemi, M., Courard, L. (2021). “Simulation of humidity and temperature distribution in green roof with pozzolana as drainage layer: Influence of outdoor seasonal weather conditions and internal ceiling temperature” Science and Technology for the Built Environment, pp. 1-16.

[22] Santos, S., da Silva, P.R., de Brito, J. (2019). “Self-compacting concrete with recycled aggregates-A literature review.” Journal of Building Engineering, Vol. 22, pp. 349–371.

[23] Madandoust, R., Kazemi, M., Moghadam, S.Y. (2017). “Analytical study on tensile strength of concrete.” Romanian Journal of Materials, Vol. 47, Issue 2, pp. 204–209.

[24] Vali, R., Khotbehsara, E.M., Saberian, M., Li, J., Mehrinejad, M., Jahandari, S. (2019). “A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles.” International Journal of Geotechnical Engineering, Vol. 13, Issue 3, pp. 236–248.

[25] Jahandari, S., Li, J., Saberian, M., Shahsavarigoughari, M. (2017(a)). “Experimental study of the effects of geogrids on elasticity modulus, brittleness, strength, and stress-strain behavior of lime stabilized kaolinitic clay.” GeoResJ, Vol. 13, pp. 49–58.

[26] Jahandari, S., Toufigh, M.M., Li, J., Saberian, M. (2018). “Laboratory study of the effect of degrees of saturation on lime concrete resistance due to the groundwater level increment.” Geotechnical and Geological Engineering, Vol. 36, Issue 1, pp. 413–424.

[27] Hajforoush, M., Madandoust, R., Kazemi, M. (2019). “Effects of simultaneous utilization of natural zeolite and magnetic water on engineering properties of self-compacting concrete.” Asian Journal of Civil Engineering, Vol. 20, Issue 2, pp. 289–300.

[28] Saberian, M., Jahandari, S., Li, J., Zivari, F. (2017). “Effect of curing, capillary action, and groundwater level increment on geotechnical properties of lime concrete: Experimental and prediction studies.” Journal of Rock Mechanics and Geotechnical Engineering, Vol. 9, Issue 4, pp. 638–647.

[29] Yan, H., Sun, W., Chen, H. (1999). The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concrete.” Cement and Concrete Research, Vol. 29, Issue 3, pp. 423–426.

[30] Madandoust, R., Kazemi, M., Khkapour Talebi, P., de Brito, J. (2019). “Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres.” Construction and Building Materials, Vol. 223, pp. 1038–1052.

[31] Kazemi, M., Kafi, M.A., Hajforoush, M., Kheyroddin, A. (2020). “Cyclic behavior of steel ring filled with compressive plastic or concrete, installed in concentric bracing system.” Asian Journal of Civil Engineering, Vol. 21, pp. 29-39.

[32] Singh, N., Arya, S., Mithul Raj, M. (2019). “Assessing the performance of self-compacting concrete made with recycled concrete aggregates and coal bottom ash using ultrasonic pulse velocity.” Recycled Waste Materials, pp. 169–178.

[33] Al-Nu’man, B.S., Aziz, B.R., Sabr A. (2015). “Abdulla, Sirwan E. Khaleel, Compressive strength formula for concrete using ultrasonic pulse velocity.” International Journal of Engineering Trends and Technology, Vol. 26, Issue 1, pp. 9–13.

[34] Karaiskos G., Deraemaeker A., Aggelis D.G. and Van Hemelrijck D. (2015). “Monitoring of concrete structures using the ultrasonic pulse velocity method.” Smart Materials and Structures, Vol. 24, Issue 11, p. 113001.

[35] Jahandari, S., Saberian, M., Tao, Z., Faridfazel Mojtahedi,  S., Li, J., Ghasemi, M., Rezvani, S.S., Li, W. (2019). “Effects of saturation degrees, freezing thawing, and curing on geotechnical properties of lime and lime-cement concretes.” Cold Regions Science and Technology, Vol. 160, 242–251.

[36] Jahandari, S., Saberian, M., Zivari, F., Li, J., Ghasemi, M., Vali, R. (2019). “Experimental study of the effects of curing time on geotechnical properties of stabilized clay with lime and geogrid.” International Journal of Geotechnical Engineering, Vol. 13, Issue 2, pp. 1–12.

[37] AzariJafari, H., Shekarchi, M., Berenjian, J., Ahmadi, B. (2015). “Enhancing workability retention of concrete containing natural zeolite by superplasticizers’ combination.” Special Publication, Vol. 302, pp. 416–424.

[38] ASTM C597-16 (2016). “Standard test method for Pulse Velocity through Concrete.” ASTM International, West Conshohocken, PA.

[39] Ferreira, L., de Brito, J., Barra, M. (2011). “Influence of the pre-saturation of recycled coarse concrete aggregates on the fresh and hardened properties of concrete.” Magazine of Concrete Research, Vol. 63, Issue 8, pp. 617–627.

[40] Mamlouk, M.S., Zaniewski, J.P. (2006). “Materials for Civil and Construction Engineers”, Second ed., Pearson Prentice Hall, New Jersey.