Rehabilitation of Corroded Reinforced Concrete Elements by Rebar Replacement

[1] Naderpour, H., Rafiean, A.H., Fakharian, P. (2018). Compressive Strength Prediction of Environmentally Friendly Concrete Using Artificial Neural Networks, J. Build. Eng., 16, 213-219.

[2] Naderpour, H., Mirrashid, M. (2018). A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials, Comput. Eng. Phys. Model., 1(4), 16-24.

[3] Farahani, A., Taghaddos, H., Shekarchi, M. (2015). Prediction of long-term chloride diffusion in silica fume concrete in a marine environment. Cement and Concrete Composites, 59, 10-17.

[4] Pirmohammadi Alishah, F. (2020). The Effect of Zeolite on Different Mechanical Properties and Permeability of Self-Compacting Concrete, Comput. Eng. Phys. Model., 3(1), 53-68.

[5] Sharifi, Y., Hosainpoor, M. (2020). A Predictive Model Based ANN for Compressive Strength Assessment of the Mortars Containing Metakaolin, J. Soft Comput. Civ. Eng., 4(2), 1-12.

[6] Sharbatdar, M.K., Abbasi, M., Fakharian, P. (2020). Improving the Properties of Self-Compacted Concrete with Using Combined Silica Fume and Metakaolin, PERIOD POLYTECH-CIV, 64(2), 535-544.

[7] Ogbonna, C., Mbadike, E., Alaneme, G. (2020). Characterisation and Use of Cassava Peel Ash in Concrete Production, Comput. Eng. Phys. Model., 3(2), 12-28.

[8] Tavakoli, D., Fakharian, P., Brito J. (2021). Mechanical Properties of Roller-Compacted Concrete Pavement Containing Recycled Brick Aggregates and Silica Fume, Road Mater. Pavement Des., 1-22.

[9] Tuutti, K. (1982). Corrosion of steel in concrete, CBI Research, Swedish Cement and Concrete Research Institute, Stockholm.

[10] Broomfield, J.P. (2006). Corrosion of steel in concrete: understanding, investigation and repair, Taylor and Francis, pp. 296.

[11] Farahani, A., Taghaddos, H. (2020). Prediction of Service Life in Concrete Structures based on Diffusion Model in a Marine Environment Using Mesh Free, FEM and FDM Approaches, J. Rehabil. Civ. Eng., 8(4), 01-14.

[12] Farahani, A. (2020). Life Cycle Cost GA Optimization of Repaired Reinforced Concrete Structures Located in a Marine Environment, J. Soft Comput. Civ. Eng., 3(4), 41-50.

[13] Tadayon, M.H., Shekarchi, M., Tadayon, M. (2016). Long-term study of chloride ingress in concretes containing pozzolans exposed to severe marine tidal zone, Construction and Building Materials, 123, 611–616.

[14] Bazant, Z.P. (1979). Physical Model for Steel Corrosion in Sea Structures Applications, J Struct Div, 105, 1155-1166.

[15] Du, Y., Clark, L.A., Chan, A.H.C. (2007). Impact of reinforcement corrosion on ductile behaviour of reinforced concrete beams, ACI Struct J, 104(3), 285-293.

[16] Molina, F.J., Alonso, C., Andrade, C. (1993). Cover cracking as a function of rebar corrosion: part 2- numerical model, Mater Struct, 26(9), 532-548.

[17] Liu, Y.P., Weyers, R.E. (1998). Modelling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures, ACI Mater J, 95(6), 675-681.

[18] Bhargava, K., Ghosh, A.K., Mori, Y., Ramanujam, S. (2006). Analytical model for time to cover cracking in RC structures due to rebar corrosion, Nuclear Eng Design, 236(11), 1123-1139.

[19] Vu, K., Stewart, M.G., Mullard, J. (2005). Corrosion-induced cracking: experimental data and predictive models, ACI Struct J, 102(5), 719-726.

[20] Maaddawy, T., Soudki, K. (2007). A model for prediction of time from corrosion initiation to corrosion cracking, Cement Concrete Compos, 29, 168-175.

[21] Ohtsu, M., Yohsimura, S. (1997). Analysis of crack propagation and initiation due to corrosion of Reinforcement, Construct Build Mater, 11, 437-442.

[22] Williamson, S.J., Clark, L.A. (2000). Pressure required to cause cover cracking of concrete due to reinforcement corrosion, Magazine of Conc Res, 52(6), 455-467.

[23] Thoft-, P. (2003). Corrosion and cracking of reinforced concrete.” Lausanne: Life- Cycle Performance of Deteriorating Structures-Assessment, Design and Management, Eds. DM Frangopol, E Bruhwiller, MH Faber.

[24] Luping, T. (1998). Chloride Transport in Concrete, Measurement and Prediction, Ph.D. Thesis, Chalmers University of Technology, Department of Building Materials, publication P 96:6, Goteborg, Sweden.

[25] Khaghanpour, R., Dousti, A., Shekarchi, M. (2016). Prediction of cover thickness based on long-term chloride penetration in a marine environment, J. Perform. Constr. Facil., 1-10.

[26] Liu, Y.P., Weyers, R.E. (1998). Modelling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures, ACI Mater J, 95(6), 675-681.

[27] Val, D.V. (2007). Factors affecting life-cycle cost analysis of RC structures in chloride contaminated environments, J. Infrastruct. Syst., 13(2), 135-143.

[28] Vu, K., Stewart, M.G. (2000). Structural reliability of concrete bridges including improved chloride-induced corrosion models, Struct Saf, 22, 313-333.

[29] Vidal, T., Castel, A., Francois, R. (2004). Analyzing crack width to predict corrosion in reinforced concrete, Cem. Concr. Res., 34(1), 165-174.

[30] Farahani, A., Shekarchi, M. (2020). Time-Dependent Structural Behavior of Repaired Corroded RC Columns Located in a Marine Site, J. Rehabil. Civ. Eng., 8(1), 40-49.

[31] Farahani, A., Taghaddos, H., Shekarchi, M. (2020). Influence of Repair on Corrosion Failure Modes of Square-RC Columns Located in Tidal Zone, J. Perform. Constr. Facil., 34(4), 1-14.