CFD Analysis of piston bowls geometry for CI direct injection engine using finite element analysis

[1] M. R. Ellis, Effect of piston bowl geometry on combustion and emissions of a direct injected diesel engine, Ph.D theses, Brunel University School of Engineering and Design (1999), pp. 1-299.

[2] P. Geng, C. Yao , Q. Wang , L. Wei , J. Liu , W. Pan , et al, Effect of DMDF on the PM emission from a turbo-charged diesel engine with DDOC and DPOC, Appl. Energy, 148(2015) 449–55.

[3] V. Gnanamoorthi, N. M. Marudhan, D. Gobalakichenin, Effect of combustion chamber geometry on performance, combustion, and emission of direct injection diesel engine with ethanol-diesel blend, Therm. Sci., 20(suppl.(4)(2016) S937-S946.

[4] B. Harshavardhan, J. M. Mallikarjuna, CFD analysis of in-cylinder flow and air-fuel interaction on different combustion chamber geometry in DISI Engine, Int. J. Theor. Appl. Res. Mech. Eng. , 2(3)(2013) 104-108.

[5] S. Jaichandar, K. Annamalai, Combined impact of injection pressure and combustion chamber geometry on the performance of a biodiesel fueled diesel engine, Energy, 55(2013) 330–339.

[6] S. Jaichandar, K. Annamalai, Effects of open combustion chamber geometries om the performance of Pongamia
biodiesel in a DI diesel engine, Fuel, 98 (2012)272-279.

[7] D. R. Johnson, R. Heltzel , A. C. Nix , N. Clark , M. Darzi, Greenhouse gas emissions and fuel efficiency of in-use high horsepower diesel, dual fuel, and natural gas engines for unconventional well development, Appl. Energy , 206(2017) 739–50.

[8] B. T. Johnson, Diesel engine emissions and their control , Platinum Met. Rev., 52(1)(2008) 23–37.

[9] G. Kalghatgi, L. Hildingsson , A. Harrison , B. Johansson , Autoignition quality of gasoline fuels in partially premixed combustion in diesel engines, Proc. Combust. Inst., 33(2)(2011) 3015–21.

[10] V. Karthickeyan, P. Balamurugan, S. Ramalingam, Studies on orange oil methyl ester in diesel engine with hemispherical and toroidal combustion chamber, Therm. Sci., 20(suppl. 4) (2016) S981-S989.

[11] A. Krishnan, M. Punnaivanam, S. Koodalingam, Certain investigation in a compression ignition engine using Rice Bran Methyl Ester fuel blends with ethanol additive, Therm. Sci., 21(1 Part B)(2017) 535-542.

[12] Y. Li, M. Jia , Y. Liu , M. Xie, Numerical study on the combustion and emission characteristics of a methanol/diesel reactivity controlled compression ignition (RCCI) engine , Appl. Energy , 106(2013) 184–97.

[13] Z. Li, Y. Zhang , G. Huang , W. Zhao , Z. He , Y. Qian, X. Lu, Control of intake boundary conditions for enabling clean combustion in variable engine conditions under intelligent charge compression ignition (ICCI) mode, Appl. Energy, 274(2020) 115297.

[14] Y. Li, M. Jia , L. Xu , X. S. Bai, Multiple-objective optimization of methanol/diesel dual-fuel engine at low loads: A comparison of reactivity controlled compression ignition (RCCI) and direct dual fuel stratification (DDFS) strategies,Fuel, 262(2020) 116673.

[15] J. Li, Effects of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel engines, Fuel, 120(2014) 66–73.

[16] J. Li, W. M. Yang, H. An, A. Maghbouli, S.K. Chou, Effect of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel engines, Fuel, 120(2014) 66-73.

[17] X. Lu, D. Han , Z. Huang, Fuel design and management for the control of advanced compression-ignition combustion modes, Prog. Energy Combust. Sci., 37(6)(2011) 741–83.

[18] X. L¨u, L. Ji, L. Zu ,Y. Hou , C. Huang , Huang Z, Experimental study and chemical analysis of n-heptane homogeneous charge compression ignition combustion with port injection of reaction inhibitors, Combust. Flame, 149(3)(2007) 261–70.

[19] V. Manente, B. Johansson , W. Cannella, Gasoline partially premixed combustion, the future of internal combustion engines , Int. J. Engine Res., 12(3)(2011) 194–208.

[20] R. M. Montajir, H. Tsunemoto, H. Ishitani, T. Minami, Fuel spray behavior in a small DI diesel engine: effect of combustion chamber geometry, SAE Tech. Pap., (2000) 2000-01-0946.

[21] C. Morley, R. J. Price, N. P. Trait and C. R. McDonald, Understanding how fuels behave in engines, Shell Research and Technology Center at Thornton, United Kingdom, The Fourth International Symposium COMODIA 98, 2008.

[22] T. Pachiannan, W. Zhong, S. Rajkumar, Z. He, X. Leng , Q. Wang , A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies, Appl. Energy, 251(2019) 113380.

[23] B. V. V. S. U. Prasad, C. S. Sharma, T. N. C. Anand, R. V. Ravikrishna, High swirl-inducing piston bowls in small diesel engines for emission reduction, Appl. Energy, 88 (2011) 2355–2367.

[24] K. Rajan and K. R. Senthil Kumar , Performance and emission characteristics of diesel engine with internal jet piston using biodiesel, Int. J. Environ. Stud., 67(4)(2010) 557–566.

[25] B. R. Ramesh Bapu, L. Saravanakumar, B. Durga Prasad, Effects of combustion chamber geometry om combustion characteristics of a DI diesel engine fueled with calophyllum inophyllum methyl ester, J. Energy Inst., 90(1)(2017) 82-100.

[26] R. D. Reitz, H. Ogawa , R. Payri, et al., IJER editorial: The future of the internal combustion engine, Int. J. Engine Res., 21(1)(2019) 3–10.

[27] R. D. Reitz, G. Duraisamy, Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines, Prog. Energy Combust. Sci., 46(2015) 12–71.

[28] T. Saito, Y. Daisho, N. Uchida, N. Ikeya, Effects of combustion chamber geometry on diesel combustion, SAE Trans., 95(4) (1986), 793-803.

[29] R. Senthil, G. Pranesh and R. Silambarasan , Use of antioxidant additives for NOx mitigation in compression ignition engine operated with biodiesel from annona oil, Therm. Sci., 20(suppl. 4)(2016) S967-S972.

[30] A. K. Wamankar, S. Murugan, Combustion, performance and emission characteristics of a diesel engine with internal jet piston using carbon black-water-diesel emulsion, Energy, 91(2015) 1030-1037.

[31] S. Xu, S. Zhong ,K. M. Pang , S. Yu , M. Jangi, X. S. Bai. Effects of ambient methanol on pollutants formation in dual-fuel spray combustion at varying ambient temperatures: A large-eddy simulation, Appl. Energy, 279(2020) 115774.

[32] M. Yao, Z. Zheng, H. Liu, Progress and recent trends in homogeneous charge compression ignition (HCCI) engines, Prog. Energy Combust. Sci. , 35(5)(2009) 398–437.

[33] F. Zhang, R. Yu, X. S. Bai, Direct numerical simulation of PRF70/air partially premixed combustion under IC engine conditions, Proc. Combust. Inst. , 35(3)(2015) 2975–82.

[34] W. Zhao, Z. Li, G. Huang ,Y. Zhang , Y. Qian , X. Lu, Experimental investigation of direct injection dual fuel of n-butanol and biodiesel on intelligent charge compression ignition (ICCI) combustion mode, Appl. Energy, 266(2020) 114884.

[35] H. Zhao, Advanced direct injection combustion engine technologies and development: diesel engines, vol. 2., Woodhead Publishing, 2009.