بررسی تأثیر فیلر سرامیکی ضایعاتی بر عملکرد آسفالت حفاظتی میکروسرفیسینگ

Abedini, M., Hassani, A., Kaymanesh, M. R., Yousefi, A. A. and Abedini, H. 2020. “Multiple stress creep and recovery behavior of SBR-modified bitumen emulsions”. J. Test. Eval., 48(4).

Aboutalebi Esfahani, M. and Khatayi, A. 2022. “Effect of type and quantity of emulsifier in bitumen polymer emulsion on microsurfacing performance”. Int. J. Pavement Eng., 23: 957-971.

ASTM D7497. 2016. “Standard practice for recovering residue from emulsified asphalt using low temperature evaporative technique”. ASTM International, West Conshohocken, PA.

ASTM D6372. 2018. “Standard practice for design, testing, and construction of microsurfacing”. American Society of Testing and Materials, West Conshohocken, PA.

ASTM D242. 2019. “Sandard specification for mineral filler for asphalt mixtures”. ASTM International, West Conshohocken, PA.

Brown, E. R., Kandhal, P. S., Roberts, F. L., Kim, Y. R., Lee, D. Y. and Kennedy, T. W. 2009. “Hot mix asphalt materials, mixture design and construction”. Third Edition, National Asphalt Pavement Association.

Commission, E. 2006. “Regulation (EC) No 1013/2006 of the European Parliament and of the Council of 14 June (2006) on shipments of waste”.

Cui, P., Wu, S., Xiao, Y., Yang, C. and Wang, F. 2020. “Enhancement mechanism of skid resistance in preventive maintenance of asphalt pavement by steel slag based on micro-surfacing”. Constr. Build. Mater., 239: 117870. doi:https://doi.org/10.1016/j.conbuildmat.2019.117870

de Brito, J., Pereira, A. S. and Correia, J. R. 2005. “Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates”. Cement Concrete Compos., 27(4): 429-433. doi:https://doi.org/10.1016/j.cemconcomp.2004.07.005

Dondi, M., Cappelletti, P., D’Amore, M., de Gennaro, R., Graziano, S. F., Langella, A., . . . and Zanelli, C. 2016. “Lightweight aggregates from waste materials: Reappraisal of expansion behavior and prediction schemes for bloating”. Constr. Build. Mater., 127: 394-409. doi:https://doi.org/10.1016/j.conbuildmat. 2016.09.111

Gujar, R. and Dadhich, G. 2019. “Modelling efficiency of industrial waste utilised for microsurfacing using artificial neural networks”. Int. J. Environ. Waste Manag., 23(2): 113-122.

Gujar, R. and Vakharia, V. 2019. “Prediction and validation of alternative fillers used in micro surfacing mix-design using machine learning techniques”. Constr. Build. Mater., 207: 519-527. doi:https://doi.org/10.1016/j.conbuildmat.2019.02.136

Halicka, A., Ogrodnik, P. and Zegardlo, B. 2013. “Using ceramic sanitary ware waste as concrete aggregate”. Constr. Build. Mater., 48: 295-305. doi:https://doi.org/10.1016/j.conbuildmat.2013.06.063

Hussein, A. A., Jaya, R. P., Abdul Hassan, N., Yaacob, H., Huseien, G. F. and Ibrahim, M. H. W. 2017. “Performance of nanoceramic powder on the chemical and physical properties of bitumen”. Constr. Build. Mater., 156: 496-505. doi:https://doi.org/10.1016/j.conbuildmat.2017.09.014

ISO 13006. 2018. “Ceramic tiles- Definitions, classification, characteristics and marking”. International Organization for Standardization (ISO), Geneva.

ISSA. 2010. “A143-Recommended performance guideline for micro surfacing”. International Slurry Surfacing Association.

ISSA. 2017a. “Outline guide design procedure for slurry seal”. Technical Bulletin 111, International Slurry Surfacing Association.

ISSA. 2017b. “Test method for measurement of excess asphalt in bituminous mixtures by use of a loaded wheel tester and sand adhesion”. Technical Bulletin 109, International Slurry Surfacing Association.

ISSA. 2017c. “Test method for measurement of stability and resistance to compaction, vertical and lateral displacement of multilayered fine aggregate cold mixes”. Technical Bulletin 147, International Slurry Surfacing Association.

ISSA. 2017d. “Test method for wet track abrasion of slurry surfacing systems”. Technical Bulletin 100, International Slurry Surfacing Association.

ISSA. 2017e. “Test method to classify emulsified asphalt/aggregate mixture systems by modified cohesion tester measurement of set and cure characteristics”. Technical Bulletin 139, International Slurry Surfacing Association.

ISSA. 2017f. “Trial mix procedure for slurry seal design”. Technical Bulletin 113, International Slurry Surfacing Association.

Izadi, A., Zalnezhad, M., Bozorgi Makerani, P. and Zalnezhad, H. 2022. “Mix design and performance evaluation of coloured slurry seal mixture containing natural iron oxide red pigments”. Road Mater. Pavement Design, 23: 907-924.

Jin, T., Warid, M., Idham, M., Hainin, M., Yaacob, H., Hassan, N., . . . and Afiqah, R. 2019. “Modification of emulsified bitumen using styrene-butadiene rubber (SBR)”. IOP Conference Series: Materials Science and Engineering.

Johannes, P. T. 2014. “Development of an improved mixture design framework for slurry seals and micro-surfacing treatments”. The University of Wisconsin, Madison.

Kamboozia, N., Saed, S. A. and Rad, S. M. 2021. “Rheological behavior of asphalt binders and fatigue resistance of SMA mixtures modified with nano-silica containing RAP materials under the effect of mixture conditioning”. Constr. Build. Mater., 303: 124433.

Keymanesh, M. R., Ziari, H., Zalnezhad, H. and Zalnezhad, M. 2020. “Mix design and performance evaluation of microsurfacing containing electric arc furnace (EAF) steel slag filler”. Constr. Build. Mater., 269: 121336.

Khadivar, A. and Kavussi, A. 2013. “Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures”. Constr. Build. Mater., 47: 1099-1105.

Luo, Y., Zhang, K., Xie, X. and Yao, X. 2019. “Performance evaluation and material optimization of Micro-surfacing based on cracking and rutting resistance”. Constr. Build. Mater., 206: 193-200. doi:https://doi.org/10.1016/j.conbuildmat.2019.02.066

Maghool, F., Arulrajah, A., Du, Y.-J., Horpibulsuk, S. and Chinkulkijniwat, A. 2017. “Environmental impacts of utilizing waste steel slag aggregates as recycled road construction materials”. Clean Technol. Environ. Policy, 19(4): 949-958. doi:10.1007/s10098-016-1289-6

Medina, C., Frías, M. and Sánchez de Rojas, M. I. 2012. “Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate”. Constr. Build. Mater., 31: 112-118. doi:https://doi.org/10.1016/j.conbuildmat.2011.12.075

Pacheco-Torgal, F. and Jalali, S. 2011. “Compressive strength and durability properties of ceramic wastes based concrete”. Mater. Struct., 44(1): 155-167. doi:10.1617/s11527-010-9616-6

Patel, C. P. and Bhavsar, J. K. 2016. “Enhancement of concrete properties by replacing cement and fine aggregate with ceramic powder”. J. Civ. Eng. Environ. Technol., 3(3): 232-236.

Poursoltani, M. and Hesami, S. 2020. “Performance evaluation of microsurfacing mixture containing reclaimed asphalt pavement”. Int. J. Pavement Eng., 21(12): 1491-1504.

Rashid, K., Razzaq, A., Ahmad, M., Rashid, T. and Tariq, S. 2017. “Experimental and analytical selection of sustainable recycled concrete with ceramic waste aggregate”. Constr. Build. Mater., 154: 829-840. doi:https://doi.org/10.1016/j.conbuildmat.2017.07.219

Ren, X. and Sancaktar, E. 2019. “Use of fly ash as eco-friendly filler in synthetic rubber for tire applications”. J. Clean. Prod., 206: 374-382. doi:https://doi.org/10.1016/j.jclepro.2018.09.202

Rodríguez-Fernández, I., Lastra-González, P., Indacoechea-Vega, I. and Castro-Fresno, D. 2019. “Recyclability potential of asphalt mixes containing reclaimed asphalt pavement and industrial by-products”. Constr. Build. Mater., 195: 148-155. doi:https://doi.org/10.1016/j.conbuildmat.2018.11.069

Saed, S. A., Kamboozia, N. and Mousavi Rad, S. 2021. “Performance evaluation of stone matrix asphalt mixtures and low-temperature properties of asphalt binders containing reclaimed asphalt pavement materials modified with nanosilica”. J. Mater. Civ. Eng., 34(1): 04021380.

Saed, S. A., Kamboozia, N., Ziari, H. and Hofko, B. 2021. “Experimental assessment and modeling of fracture and fatigue resistance of aged stone matrix asphalt (SMA) mixtures containing RAP materials and warm-mix additive using ANFIS method”. Mater. Struct., 54(6): 1-19.

Senthamarai, R. M., Manoharan, P. D. and Gobinath, D. 2011. “Concrete made from ceramic industry waste: Durability properties”. Constr. Build. Mater., 25(5): 2413-2419. doi:https://doi.org/10.1016/j. conbuildmat.2010.11.049

Shamsaei, M., Aghayan, I. and Kazemi, K. A. 2017. “Experimental investigation of using cross-linked polyethylene waste as aggregate in roller compacted concrete pavement”. J. Clean. Prod., 165: 290-297. doi:https://doi.org/10.1016/j.jclepro.2017.07.109

Shamsaei, M., Khafajeh, R. and Aghayan, I. 2019. “Laboratory evaluation of the mechanical properties of roller compacted concrete pavement containing ceramic and coal waste powders”. Clean Technol. Environ. Policy, 21(3): 707-716. doi:10.1007/s10098-018-1657-5

Siddique, R. and Cachim, P. 2018. “Waste and supplementary cementitious materials in concrete: characterisation, properties and applications”. Woodhead Publishing.

Simões, D., Almeida-Costa, A. and Benta, A. 2017. “Preventive maintenance of road pavement with microsurfacing- an economic and sustainable strategy”. Int. J. Sustain. Transport., 11(9): 670-680. doi:10.1080/15568318.2017.1302023

Sun, X., Qin, X., Li, S., Zou, C., Wang, C. and Wang, X. 2018. “Characterization of thermal insulating micro-surfacing modified by inorganic insulating material”. Constr. Build. Mater., 175: 296-306. doi:https://doi.org/10.1016/j.conbuildmat.2018.04.170

Suzuki, M., Seddik Meddah, M. and Sato, R. 2009. “Use of porous ceramic waste aggregates for internal curing of high-performance concrete”. Cement Concrete Res., 39(5): 373-381. doi:https://doi.org /10.1016/j.cemconres.2009.01.007

Wan, J., Wu, S., Xiao, Y., Liu, Q. and Schlangen, E. 2016. “Characteristics of ceramic fiber modified asphalt mortar”. Mater. (Basel, Switzerland), 9(9): 788. doi:10.3390/ma9090788

Wang, A., Shen, S., Li, X. and Song, B. 2019. “Micro-surfacing mixtures with reclaimed asphalt pavement: Mix design and performance evaluation”. Constr. Build. Mater., 201: 303-313. doi:https://doi.org /10.1016/j.conbuildmat.2018.12.164

Woszuk, A., Bandura, L. and Franus, W. 2019. “Fly ash as low cost and environmentally friendly filler and its effect on the properties of mix asphalt”. J. Clean. Prod., 235: 493-502. doi:https://doi.org /10.1016/j.jclepro.2019.06.353

Woszuk, A., Wróbel, M. and Franus, W. 2019. “Influence of waste engine oil addition on the properties of zeolite-foamed asphalt”. Mater. (Basel, Switzerland), 12(14): 2265. doi:10.3390/ma12142265

Zalnezhad, M. and Hesami, E. 2020. “Effect of steel slag aggregate and bitumen emulsion types on the performance of microsurfacing mixture”. J. Traffic Transport. Eng. (English Edition), 7(2): 215-226. doi:https://doi.org/10.1016/j.jtte.2018.12.005

Zhang, H., Keoleian, G. A. and Lepech, M. D. 2013. “Network-level pavement asset management system integrated with life-cycle analysis and life-cycle optimization”. J. Infrastruct. Syst., 19(1): 99-107.

Zhou, Z., Xu, Z., Masliyah, J. H. and Czarnecki, J. 1999. “Coagulation of bitumen with fine silica in model systems”. Colloid Surface A: Physicochem. Eng. Aspects, 148(3): 199-211.