Convertible Perfect Absorber with Single Ring Resonator: Tunable Single Band/Dual-Band Visible

[1] Choi JH. (2015) High-speed devices and circuits with THz applications., CRC Press.
[2] Pereira MF, and Shulika O. (2011) Terahertz and Mid Infrared Radiation: Generation, Detection and Applications., Springer, Netherlands.
[3] Jafari Chashmi M., Rezaei P., and Kiani N. (2020) Y-shaped graphene-based antenna with switchable circular polarization., Optik, vol. 200, pp. 163321.
[4] Ullah S, Ruan C, Tanveer Ul Haq TUI and Zhang X. (2019) High performance THz patch antenna using photonic band gap and defected ground structure, J. Electromag. Wav. Appl., vol. 33, no. 15, pp. 1943-1954
[5] Jafari Chashmi M., Rezaei P., and Kiani N. (2020) Polarization controlling of multi resonant graphene-based microstrip antenna., Plasmonics, vol.15, no. 1, pp. 417-426.
[6] Jafari Chashmi M., Rezaei P., and Kiani N. (2019) Reconfigurable graphene-based V-shaped dipole antenna: From quasi-isotropic to directional radiation pattern., Optik, vol.184, pp. 421-427.
[7] Khani S., Danaie M., and Rezaei P. (2019) Size reduction of MIM surface plasmon based optical bandpass filters by the introduction of arrays of silver nano-rods., Phys. E: Low-dimens. Syst. Nanostruct., vol. 113, pp. 25-34.
[8] Khani S., Danaie M., and Rezaei P. (2019) Tunable single-mode bandpass filter based on metal-insulator-metal plasmonic coupled U-shaped cavities., IET Optoelec., vol. 13, no. 4, pp. 161-171.
[9] Khani S., Danaie M., and Rezaei P. (2020) All-optical plasmonic switches based on asymmetric directional couplers incorporating bragg gratings., Plasmonics, vol. 15, pp. 869-879.
[10] Khani S., Danaie M., and Rezaei P. (2020) Compact and low-power all-optical surface plasmon switches with isolated pump and data waveguides and a rectangular cavity containing nano-silver strips., Superlattices Microstruct., vol. 141, pp. 106481.
[11] Ghods MM., and Rezaei P. (2018) Graphene-based Fabry-Perot resonator for chemical sensing applications at mid-infrared frequencies. IEEE Photon. Technol. Lett., vol. 30, no. 22, pp. 1917-1920. [12] Kiani S., Rezaei P., Fakhr M., An overview of interdigitated microwave resonance sensors for liquid samples permittivity detect on, Ch. 7 in Interdigital Sensors, Springer, 2021. DOI: 10.1007/978-3-030-62684-6_7
[13] Sharma A.K., Kaur B. (2018) Analyzing the effect of graphene's chemical potential on the performance of a plasmonic sensor in infrared. Sol. State. Commun., Vol. 275, pp. 58-62.
[14] Nickpay M.R., Danaie M., Shahzadi A. (2021) Highly sensitive THz refractive index sensor based on folded split-ring metamaterial graphene resonators, Plasmonics. Doi:10.1007/s11468-021-01512-8.
[15] Nickpay M.R., Danaie M., Shahzadi A. (2019) Wideband Rectangular Double-Ring Nanoribbon Graphene-Based Antenna for Terahertz Communications. IETE J. Research, pp. 1-10.
[16] Landy NI., et al. (2008) Perfect Metamaterial Absorber. Phys. Rev. Lett., vol. 100, pp. 207402.
[17] Chen HT. (2012) Interference theory of metamaterial perfect absorbers., Opt. Express, vol. 20, pp. 7165-7172.
[18] Meng L., Zhao D., Ruan Z., Li Q., Yang Y., and Qiu M. (2014) Optimized grating as an ultra-narrow band absorber or plasmonic sensor., Opt. Lett., vol. 39, no. 5, pp. 1137-1140.
[19] He J., Ding P., Wang J., Fan C., and Liang E. (2015) Ultra-narrow band perfect absorbers based on plasmonic analog of electromagnetically induced absorption., Opt. Express, vol. 23, no. 5, pp. 6083-6091.
[20] Huang L., Chowdhury DR., Ramani S., Reiten MT., Luo SN., Taylor AJ., and Chen HT. (2012) Experimental demonstration of terahertz metamaterial absorbers with a broad and flat high absorption band., Opt. Lett., vol. 37, no. 2, pp. 154-156.
[21] Wang DG., Liu HM., Hu WX., Kong HL., Cheng LL., and Chen QZ., (2013) Broadband and ultra-thin terahertz metamaterial absorber based on multi-circular patches., Eur. Phys. J. B, vol. 86, no.7, pp. 1-9.
[22] Wen QY., et al. (2013) A polarization-independent and ultra-broadband terahertz metamaterial absorber studied based on circular-truncated cone structure. Acta. Phys. Sin-CH. ED., vol. 62, pp. 237801.
[23] Grant J., Ma Y., Saha S., Khalid A., and Cumming DRS. (2011) Polarization insensitive, broadband terahertz metamaterial absorber., Opt. Lett., vol. 36, no.17, pp. 3476-3478.
[24] Fu J., et al. (2015) The electromagnetic force in the terahertz band generated by a cross-shaped absorber., Sol. State. Commun., vol. 204, pp. 5-8.
[25] Ghods MM., and Rezaei P. (2017) Ultra-wideband microwave absorber based on uncharged graphene layers, Electromagnetic waves and applications., J. Electromag. Wav. Appl., vol. 32, no. 15, pp. 1950-1960 (2017).
[26] Naqavi SA., Baqir MA. (2018) ultra-wideband symmetric G-shape metamaterial based microwave absorber., J. Electromag. Wav. Appl., vol. 32, no. 16, pp. 1492976.
[27] Dincer F., Karaaslan M., and Sabah C. (2015) design and analysis of perfect metamaterial absorber in GHz and THz frequencies., J. Electromag. Wav. Appl., vol. 29. no.18, pp. 1043030.
[28] Zamzam P., Rezaei P., Khatami SA. (2021) Quad-band polarization-insensitive metamaterial perfect absorber based on bilayer graphene metasurface., Phys. E, vol. 128, pp. 114621.
[29] Lou C.Y., et al. (2015) tunable metamaterial dual-band terahertz absorber., Sol. State. Commun., Vol. 222, pp. 32-36.
[30] Ahmadi H., et al. (2021) Graphene-based terahertz metamaterial absorber for broadband application., Sol. State. Commun., vol. 323, pp. 114023.
[31] Aksimsek S. (2020) design of an ultra-thin, multiband, micro-slot based terahertz metamaterial absorber., J. Electromag. Wav. Appl., vol. 34, no. 16, pp.1809532.

[32] Faruk A., and Sabah C. (2018) Absorber and sensor applications of complimentary H-shaped fishnet metamaterial for sub-terahertz frequency region., Optik, vol. 177, pp. 64-70.
[33] Ordal MA., Long LL., Bell RJ., Bell SE., Bell RR., Alexander RW., and Ward CA. (1983) Optical properties of the metals al, co, cu, au, fe, pb, ni, pd, pt, ag, ti, and w in the infrared and far infrared., Appl. Opt., vol. 22, pp. 1099-1119.
[34] Norouzi Razani AH., Rezaei P. (2022) Broadband polarization insensitive and tunable terahertz metamaterial perfect absorber based on the graphene disk and square ribbon, Micro Nanostruct., vol. 163, 107153.
[35] Wang BX., Wang GZ., Wang LL., and Zhai X. (2015) Design of a five-band terahertz absorber based on three nested split-ring resonators., IEEE Photon. Technol. Lett., vol. 28, no. 3, pp. 307-310.
[36] Norouzi Razani A, Rezaei P. (2022) Multiband polarization insensitive and tunable terahertz metamaterial perfect absorber based on the heterogeneous structure of graphene., Opt. Quant. Electron., vol. 54, 407.
[37] Zamzam P., Rezaei P. (2021) A terahertz dual-band metamaterial perfect absorber based on metal-dielectric-metal multi-layer columns., Optic. Quant. Electron., vol. 53, pp. 109.
[38] Zheng W., Li W., and Chang SJ. (2015) A thermally tunable terahertz metamaterial absorber., Optoelec. Lett., vol. 11, pp. 18-21.
[39] Liu J., Fan L., Ku J., and Moe L. (2016) Absorber: a novel terahertz sensor in the application of substance identification., Opt. Quant. Electron., vol. 48, no. 2, pp. 80.
[40] Kong H., Li G., Jin Z., Ma G., Zhang Z., and Zhung C. (2012) Polarization-independent metamaterial absorber for terahertz frequency., J. Infrared, Millimeter, and Terahertz Wav., vol. 33, pp. 649-656.
[41] Ling X., Xhiao Z., and Zheng X. (2018) Tunable terahertz metamaterial absorber and the sensing application., J. Mater. Sci. Mater. in Electron., vol. 29, pp. 1497-1503.
[42] Nickpay M.R., Danaie M., Shahzadi A. (2021) A wideband and polarization-insensitive graphene-based metamaterial absorber., Superlatt. Microstru. vol. 150, pp. 106786.