In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis

[1] Fardis, M.N., Panagiotakos, T.B. (1997). “Seismic design and response of bare and infilled reinforced concrete buildings – part ii: infilled structures.” Journal of Earthquake Engineering, Vol. 01, pp. 475-503. doi:10.1080/13632469708962375

[2] Negro, P., Colombo, A. (1997). “Irregularities induced by nonstructural masonry panels in framed buildings.” Engineering Structures. Vol. 19, Issue 7, pp. 576–585. doi:10.1016/S0141-0296(96)00115-0

[3] Centeno, J., Ventura, C., Foo, S., Lara, O. (2008). “Seismic performance of gravity load designed reinforced concrete frames with unreinforced masonry infill walls.” In: Structures Congress. pp. 1–13. doi:10.1061/41016(314)115

[4] Jalaeefar, A., Zargar, A. (2020). “Effect of infill walls on behavior of reinforced concrete special moment frames under seismic sequences.” In Structures. Vol. 28, pp. 766–773. doi:10.1016/j.istruc.2020.09.029

[5] Torkian, Z., Khodakarami, M.I. (2022). “Development of Fragility Curves for Brick Infill Walls in Steel Frame Structures.” Journal of Rehabilitation in Civil Engineering, Vol. 10, Issue4. doi:10.22075/jrce.2021.21646.1453

[6] Filiatrault, A., Sullivan, T. (2014). “Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering.” Earthquake Engineering and Engineering Vibration. Vol. 13, pp. 17–46. doi:10.1007/s11803-014-0238-9

[7] Villaverde, R. (1997). “Seismic design of secondary structures: state of the art‏.” Journal of structural engineering. Vol. 23, pp. doi:1011–1019. 10.1061/(ASCE)0733-9445(1997)123:8(1011)

[8] Raddington JR. (1984). “The influence of initial gaps on infilled frame behavior.” In: Proceedings of Institution of Civil Engineer Part II, pp. 295–310.

[9] Ju, R.S., Lee, H.J., Chen, C.C., Tao, C.C. (2012). “Experimental study on separating reinforced concrete infill walls from steel moment frames.” Journal of Constructional Steel Research. Vol. 71, pp. 119–128. doi: 10.1016/j.jcsr.2011.10.004

[10] Kuang, J.S., Wang. Z. (2017). “Cyclic load tests of RC frame with column-isolated masonry infills‏.” In: Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology (2ECEES), Istanbul, Turkey; pp. 25-29.

[11] Chen, X., Liu, Y. (2017). “Finite Element Study of the Effect of Interfacial Gaps on the in-Plane Behaviour of Masonry Infills Bounded by Steel Frames.” Structures, Vol. 10, pp. 1–12. doi: 10.1016/j.istruc.2016.11.001

[12] Hu, C., Liu, Y. (2015). “Effects of Interfacial Gaps on the In-Plane Behaviour of Masonry Infilled RC Frames.” GEN. 44, p1.

[13] Prakash, S.S., Alagusundaramoorthy, P. (2007). “Study on Brick Masonry Infill Walls With Air Gap.” In: 9th Canadian Conference on Earthquake Engineering, Ottawa, Ontario, Canada.

[14] Rezaee Manesh, M., Fattahi, S., & Saffari, H. (2020). Investigation of Earthquake Significant Duration on the Seismic Performance of Adjacent Steel Structures in Near-Source. Journal of Rehabilitation in Civil Engineering, 9(1), 84–101. https://doi.org/10.22075/jrce.2020.20373.1410

[15] Gupta VV, Reddy G, Pendhari SS. Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers. Comput Eng Phys Model 2022;5:19–44. https://doi.org/10.22115/CEPM.2022.317125.1192.

[16] Chabokan E, Faridmehr I. Seismic Assessment of Steel Moment Frames with Irregularity in Mass and Stiffness. Comput Eng Phys Model 2018;1:71–89. https://doi.org/10.22115/cepm.2018.141604.1039.

[17] Siddika A, Awall M, Mamun M, Al A, Humyra T. Study on natural frequency of frame structures. Comput Eng Phys Model 2019;2:36–48.

[18] Lin, K., Totoev, Y.Z., Liu, H.J. (2011). “In-plane cyclic test on framed dry-stack masonry panel‏.” In Advanced materials research. Vol. 163, pp. 3899–903. doi:10.4028/www.scientific.net/AMR.163-167.3899.

[19] Mohammadi, M., Akrami, V., Mohammadi-Ghazi, R. (2011). “Methods to Improve Infilled Frame Ductility.” Journal of Structural Engineering, Vol. 137, Issue 6, pp. 646–653. doi: 10.1061/(ASCE)ST.1943-541X.0000322

[20] Misir, I.S., Ozcelik, O., Girgin, S.C., Kahraman, S. (2012). “Experimental work on seismic behavior of various types of masonry infilled RC frames.” Structural Engineering and Mechanics. Vol. 44, Issue 6, pp. 763–774. doi: 10.12989/sem.2012.44.6.763

[21] Preti, M., Bettini, N., Plizzari, G. (2012). “Infill walls with sliding joints to limit infill-frame seismic interaction: large-scale experimental test‏.” Journal of Earthquake Engineering, Vol. 16, Issue 1, pp. 125–141. doi:10.1080/13632469.2011.579815

[22] Bolis, V., Stavridis, A., Preti, M. (2017). “Numerical Investigation of the In-Plane Performance of Masonry-Infilled RC Frames with Sliding Subpanels.” Journal of Structural Engineering, Vol. 143, Issue 2. doi: 10.1061/(ASCE)ST.1943-541X.0001651

[23] Preti, M., Bettini, N., Migliorati, L., Bolis, V., Stavridis, A., Plizzari, G.A. (2016)‏‏‏. “Analysis of the in‐plane response of earthen masonry infill panels partitioned by sliding joints.” Earthquake Engineering & Structural Dynamics, Vol. 45, Issue 8, pp. 1209-1232.doi: 10.1002/eqe.2703

[24] Markulak, D., Radic, I., Sigmund, V. (2013). “Cyclic testing of single bay steel frames with various types of masonry infill‏.” Engineering structures, Vol. 51, pp. 267–277. doi: 10.1016/j.engstruct.2013.01.026

[25] Aliaari, M. (2005). “Development of seismic infill wall isolator subframe (SIWIS) system‏.” Ph.D. thesis, Department of Architectural Engineering, Penn State University, University Park.

[26] Tasligedik, A.S. (2014). “Damage mitigation strategies for non-structural infill walls.” Ph.D. thesis, Department of Civil Engineering, University of Canterbury.

[27] Lin, K., Totoev, Y., Liu, H., Guo, T. (2016). “In-Plane Behaviour of a Reinforcement Concrete Frame with a Dry Stack Masonry Panel.” Materials, Vol. 9 Issue 2. doi:10.3390/ma9020108

[28] Mohammadi, M., Akrami, V., Mohammadi-Ghazi, R. (2011), “Methods to improve infilled frame ductility.” Journal of Structural Engineering, Vol. 137, Issue 6, pp. 646-653. doi: 10.1061/(ASCE)ST.1943-541X.0000322

[29] Mohammadi Nikoo, M., Akhaveissy, A. H., Permanoon, A. (2021). “An Investigation of Performance of Masonry Wall Reinforced with Timber lumbers.” Journal of Rehabilitation in Civil Engineering, Vol.9, Issue 1, pp. 114-138. doi: 10.22075/JRCE.2020.13379.1243

[30] Vailati, M., Monti, G. (2016). “Earthquake-resistant and thermo-insulating infill panel with recycled-plastic joints.” In Earthquakes and Their Impact on Society, pp. 417-432. doi: 10.1007/978-3-319-21753-6_15

[31] Markulak, D., Dokšanović, T., Radić, I., Miličević, I. (2018). “Structurally and environmentally favorable masonry units for infilled frames.” Engineering Structures, 175, pp.753-764. doi. /10.1016/j.engstruct.2018.08.073

[32] Hosseini-Gelekolai, S.M., & Tabeshpour, M. (2011). Soft story design in reinforced concrete structure and effect of masonry infill wall. In Proceedings, sixth international conference of seismology and earthquake engineering, CDROM Tehran, Iran (pp. 1-18).

[33] Tsantilis, A.V., Triantafillou, T.C. (2020). “Innovative Seismic Isolation of Masonry Infills in Steel Frames using Cellular Materials at the Frame-Infill Interface.” Journal of Earthquake Engineering, Vol. 24, pp. 1729–1746. doi: 10.1080/13632469.2018.1478347

[34] Specification for structural steel buildings (ANSI/AISC 360-10)

[35] Flanagan, R.D., Bennett, R.M. (1999). “Bidirectional Behavior of Structural Clay Tile Infilled Frames.” Journal of structural engineering, Vol. 125, pp. 236–244. doi: 10.1061/(ASCE)0733-9445(1999)125:3(236)

[36] Bennett, R.M.; Boyd, K.A.; Flanagan, R.D. (1997). “Compressive Properties of Structural Clay Tile Prisms.” Journal of structural engineering, Vol. 123, pp. 920–926. doi: 10.1061/(ASCE)0733-9445(1997)123:7(920)

[37] Tsantilis, A.V., Triantafillou, T.C. (2018). “Innovative seismic isolation of masonry infills using cellular materials at the interface with the surrounding RC frames.” Engineering Structures. Vol. 155, pp. 279–297. doi: 10.1016/j.engstruct.2017.11.025

[38] Rahmani, O., Adami, S.H. (2015). “Experimental study of static behavior of sandwich structures under flexural loading.” 16th Marine Industry Conference, Bandar Abbas."In Persian"

[39] Ju, J., Kim, D.M., Kim, K. (2012). “Flexible cellular solid spokes of a non-pneumatic tire.” Composite Structures, Vol. 94, pp. 2285–2295. doi: 10.1016/j.compstruct.2011.12.022

[40] Schwarz, S., Hanaor, A., Yankelevsky, D.Z. (2015). “Experimental Response of Reinforced Concrete Frames With AAC Masonry Infill Walls to In-plane Cyclic Loading.” Structures, pp. 306–319. doi: 10.1016/j.istruc.2015.06.005

[41] Abbasnejadfard, M., Farzam, M. (2016). “The effect of opening on stiffness and strength of infilled steel frames.” Journal of Rehabilitation in Civil Engineering, Vol. 4, Issue 1, pp. 78-90. doi: 10.22075/JRCE.2016.494