پیوندهای مفید
آمار
| تعداد نشریات | 21 |
| تعداد شمارهها | 698 |
| تعداد مقالات | 10,094 |
| تعداد مشاهده مقاله | 71,270,483 |
| تعداد دریافت فایل اصل مقاله | 62,993,759 |
طراحی، مدل سازی و بهینه سازی ساختار یک ماشین سنکرون مغناطیس دائم سرعت بالای مجهز به روکش محافظ روتور با استفاده از روش بهینه سازی تاگوچی | ||
| مدل سازی در مهندسی | ||
| دوره 21، شماره 75، دی 1402، صفحه 161-179 اصل مقاله (2 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22075/jme.2023.28842.2358 | ||
| نویسندگان | ||
| حسین پری ور* 1؛ احمد دارابی2 | ||
| 1کارشناسی ارشد، دانشکده مهندسی برق، دانشگاه صنعتی شاهرود | ||
| 2استاد، دانشکده مهندسی برق، دانشگاه صنعتی شاهرود | ||
| تاریخ دریافت: 07 آبان 1401، تاریخ بازنگری: 09 دی 1401، تاریخ پذیرش: 06 تیر 1402 | ||
| چکیده | ||
| در این مقاله، یک روش بهینه سازی مبتنی بر روش تاگوچی برای طراحی و بهینه سازی ماشین سنکرون مغناطیس دائم سرعت بالا مجهز به روکش محافظ ارائه شده است. در طراحی اولیه و نهایی، عملکرد ماشین در حوزه الکترومغناطیسی و مکانیکی مورد بررسی قرار گرفته است. نتایج بدست آمده روش اجزاء محدود (FEM) نشان می دهند که در طراحی نهایی، برخی از پارامترها تغییر کرده است که مهم ترین آن ها به این صورت می باشند: ضخامت روکش محافظ و ضخامت آهنربای دائم به ترتیب 48.05 درصد و 16.66 درصد کاهش یافته است. این امر منجر به کاهش وزن روکش محافظ 28.29 درصد، وزن آهنربای دائم 16.31 درصد و وزن کل ماشین 1.94 درصد شده است. تلفات مس به اندازه 9.80 درصد و تلفات کل ماشین 0.98 درصد کاهش پیدا کرده است و گشتاور دندانه ای 22.44 درصد کاهش و راندمان 0.02 درصد نسبت به طراحی اولیه افزایش پیدا کرده است. | ||
| کلیدواژهها | ||
| ماشین سنکرون مغناطیس دائم سرعت بالا؛ روکش محافظ؛ روش اجزاء محدود؛ روش بهینه سازی تاگوچی؛ تیتانیوم؛ گشتاور دندانه ای | ||
| عنوان مقاله [English] | ||
| Design, Modeling and Optimization of a High-speed Permanent Magnet Synchronous Machine with Retention Sleeve of Rotor using Taguchi Optimization Method | ||
| نویسندگان [English] | ||
| Hossein Parivar1؛ Ahmad Darabi2 | ||
| 1Department of Electrical Engineering, Shahrood University of Technology, Shahrood, Iran | ||
| 2Department of Electrical Engineering, Shahrood University of Technology, Shahrood, Iran | ||
| چکیده [English] | ||
| This paper presents a novel method based on the well-known Taguchi optimization method to design and optimize a high-speed permanent magnet synchronous machine (HS-PMSM). An HS-PMSG is analytically designed at the first step, and next, it has been optimized by the Taguchi optimization method and verified through FEM analysis. Results obtained from the electromagnetic and mechanical simulations of HS-PMSG show that in the optimized design: Owing to the reduction in the thicknesses of the retention sleeve (48.05%) and PM (16.66%), as a consequence, the total size and dimensions of the HS-PMSG are reduced. The weight of PM and the retention sleeve are reduced by about 16.31% and 29.28% responsively, and as a result, the total weight of HS-PMSG is reduced by approximately 1.94%. The Joule loss is reduced by about 9.80%. The HS-PMSG efficiency is improved by 0.02%, and finally, the cogging torque is reduced by 22.44%, compared with the initially designed machine. | ||
| کلیدواژهها [English] | ||
| High-speed Permanent Magnet Synchronous Machine (HS-PMSM), Retention Sleeve, Finite-Element Method (FEM), Taguchi Optimization Method, Titanium, Cogging Torque | ||
| مراجع | ||
|
[1] Rode, Ashwin, Tamma Carleton, Michael Delgado, Michael Greenstone, Trevor Houser, Solomon Hsiang, Andrew Hultgren et al. "Estimating a social cost of carbon for global energy consumption." Nature 598, no. 7880 (2021): 308-314. [2] Parivar, Hossein, Mojtaba Shivaie, Ahmad Darahi, and Meisam Ansari. "An efficient direct torque control strategy for a doubly fed induction generator (DFIG) in wind energy conversation systems." In 2021 IEEE Texas Power and Energy Conference (TPEC), pp. 1-5. IEEE, 2021. [3] Bensalah, Amina, Georges Barakat, and Yacine Amara. "Electrical generators for large wind turbine: Trends and challenges." Energies 15, no. 18 (2022): 6700. [4] Parivar, H., and A. Darabi. "Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor." International Journal of Engineering 34, no. 11 (2021): 2433-2441. [5] Parivar, Hossein, and Ahmad Darabi. "Taguchi Method for Design and Optimization of a High-Speed Permanent Magnet Synchronous Generator Protected by Retention Sleeve." Engineering and Applied Sciences 7, no. 2 (2022): 21-28. [6] Khan, Hamid Ali, Faisal Khan, Naseer Ahmad, and Jong-Suk Ro. "Analysis and design of novel high speed permanent magnet machine considering magnet eddy current loss." IEEE Access 8 (2020): 135675-135685. [7] Khan, Hamid Ali, Faisal Khan, Surat Khan, Naseer Ahmad, Jahangeer Badar Soomro, and Irfan Sami. "Design and performance investigation of 3-slot/2-pole high speed permanent magnet machine." IEEE Access 9 (2021): 41603-41614. [8] Wang, Wuqiang, Yong Li, Dajun Huan, Xiaodong Chen, Hongquan Liu, Yanrui Li, and Lisha Li. "Research on stress design and manufacture of the fiber-reinforced composite sleeve for the rotor of high-speed permanent magnet motor." Energies 15, no. 7 (2022): 2467. [9] Duan, Chongwei, Hong Guo, Wei Xing, Wei Tian, and Jinquan Xu. "Design and analysis of a 120kW high-speed permanent magnet motor with a novel evaporative cooling configuration for centrifugal compressor." In 2018 21st International Conference on Electrical Machines and Systems (ICEMS), pp. 393-397. IEEE, 2018. [10] Qu, Wanjun, Zilong Guo, Zhongwu Mu, Yuqing Xing, and Ruolin Liang. "Research on mechanical characteristics of high-speed permanent magnet motor." In 2020 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), pp. 1-2. IEEE, 2020. [11] Huang, Ziyuan, Jiancheng Fang, Xiquan Liu, and Bangcheng Han. "Loss calculation and thermal analysis of rotors supported by active magnetic bearings for high-speed permanent-magnet electrical machines." IEEE Transactions on Industrial Electronics 63, no. 4 (2015): 2027-2035. [2] Ding, W. A. N. G., S. H. E. N. Qiping, C. H. E. N. Xin, and H. A. N. Li. "Electromagnetic analysis of compound excitation high speed permanent magnet synchronous motor." In 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), pp. 1-6. IEEE, 2019. [13] Yi, Lingzhi, and Xinjian Yin. "Optimization of magnetic pole structure of high-speed permanent magnet synchronous motor weakens cogging torque." In 2020 IEEE 1st China International Youth Conference on Electrical Engineering (CIYCEE), pp. 1-5. IEEE, 2020. [14] Hong, Zhao-feng, Zhen-yu Cheng, and Yun-chong Wang. "Large-airgap high-speed permanent magnet machines for flywheel system applications." In 2020 23rd International Conference on Electrical Machines and Systems (ICEMS), pp. 1936-1939. IEEE, 2020. [15] Yin, Xiliang, Haipeng Geng, Hao Lv, Hao Xu, and Yonghong Qi. "Analysis of Thermal Characteristics of l0Kw High Speed Permanent Magnet Synchronous Motor." In 2019 IEEE International Conference on Mechatronics and Automation (ICMA), pp. 192-197. IEEE, 2019. [16] Jun, Hyun-Woo, Ju Lee, Hyung-Woo Lee, and Won-Ho Kim. "Study on the optimal rotor retaining sleeve structure for the reduction of eddy-current loss in high-speed SPMSM." IEEE Transactions on Magnetics 51, no. 3 (2015): 1-4. [17] Du, Guanghui, Wei Xu, Na Huang, Xin Cheng, and Xinyu Xiao. "Rotor design of high power high speed permanent magnet machine considering multiphysics constraints." In 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), pp. 1-5. IEEE, 2019. [18] Fukushima, Toshihide, and Masahide Ooshima. "Combination of pole number of motor and suspension windings and the influence on suspension force in bearingless motors." In 2020 23rd International Conference on Electrical Machines and Systems (ICEMS), pp. 44-49. IEEE, 2020. [19] Zhang, Yue, Sean McLoone, and Wenping Cao. "High speed permanent magnet motor design and power loss analysis." In 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), pp. 1-6. IEEE, 2017. [20] Zhang, Zhongming, Zhiquan Deng, Cong Gu, Quangui Sun, Cong Peng, and Gucai Pang. "Reduction of rotor harmonic eddy-current loss of high-speed PM BLDC motors by using a split-phase winding method." IEEE Transactions on Energy Conversion 34, no. 3 (2019): 1593-1602. [21] Li, Yuanwen, Changsheng Zhu, Lijian Wu, and Yuting Zheng. "Multi-objective optimal design of high-speed surface-mounted permanent magnet synchronous motor for magnetically levitated flywheel energy storage system." IEEE Transactions on Magnetics 55, no. 7 (2019): 1-8. [22] Liu, Lin, Youguang Guo, Gang Lei, and Jianguo Zhu. "Design and Analysis Technologies of High Speed Permanent Magnet Machines." In 2021 31st Australasian Universities Power Engineering Conference (AUPEC), pp. 1-6. IEEE, 2021. [23] Zwyssig, Christof, Simon D. Round, and Johann W. Kolar. "An ultrahigh-speed, low power electrical drive system." IEEE Transactions on Industrial Electronics 55, no. 2 (2008): 577-585. [24] Shen, Qiping, Ziyao Zhou, Shan Li, Xinglin Liao, Tao Wang, Xiaorong He, and Jingshan Zhang. "Design and analysis of the high-speed permanent magnet motors: A review on the state of the art." Machines 10, no. 7 (2022): 549. [25] Bianchi, Nicola, Silverio Bolognani, and Paolo Frare. "Design criteria for high-efficiency SPM synchronous motors." IEEE Transactions on energy conversion 21, no. 2 (2006): 396-404. [26] Wrobel, R., and P. H. Mellor. "The use of a genetic algorithm in the design optimisation of a brushless DC permanent magnet machine rotor." In Second International Conference on Power Electronics, Machines and Drives (PEMD 2004)., vol. 2, pp. 823-827. IET, 2004. [27] Wang, J. "Design optimisation of a miniature multi-pole permanent magnet generator." (1999): 128-132. [28] Robinson, Jacob, and Yahya Rahmat-Samii. "Particle swarm optimization in electromagnetics." IEEE transactions on antennas and propagation 52, no. 2 (2004): 397-407.
| ||
|
آمار تعداد مشاهده مقاله: 968 تعداد دریافت فایل اصل مقاله: 381 |
||