فرایند مکانوشیمیایی در مخلوط TiO2-Al-C برای تولید Al2O3-TiC

[1] Welham, N.J. (1998). Mechanical activation of the solid-state reaction between Al and TiO₂, Mater. Sci. Eng. A 255, 81–89.

[2] Feng, C.F., Froyen, L. (2000). Formation of Al₃Ti and Al₂O₃ from an Al–TiO₂ system for preparing in-situ aluminum matrix composites, Compos. Part A 31, 385–390.

[3] Kleiner, S., Bertocco, F., Khalid, F.A., Beffort, O. (2005). Decomposition of process control agent during mechanical milling and its influence on displacement reactions in the Al–TiO₂ system, Mater. Chem. Phys. 89, 362–366.

[4] Liu, Zh., Raynova, S., Zhang, D., Gabbitas, B. (2007). Study on the self-sustained reactions in an Al–TiO₂ composite powder produced by high-energy mechanical milling, Mater. Sci. Eng. A 449–451, 1107–1110.

[5] Zhu, H., Jiang, Y., Yao, Y., Song, J., Li, J., Xie, Z. (2012). Reaction pathways, activation energies and mechanical properties of hybrid composites synthesized in-situ from Al-TiO₂-C powder mixtures, Mater. Chem. Phys. 137, 532–542.

[6] Hajalilou, A., Saidi, A., Abbasi, M. (2010). Production of titanium carbide and TiC-Al₂O₃ nanocomposite using rutile by combustion synthesis and mechanical alloying, J. of Adv. Processes in Mater. Eng. 4(1), 1-9 (in Persian).

[7] Rahbari, R., Saw, L.H., Hamdi, M., Yahya, R. (2009). Combustion synthesis of TiO₂-Al-C/Al₂O₃ mixture in the presence of oxygen, J. Phys. 152, 1–9.

[8] Amel-Farzad, H., Vahdati-Khaki, J., Haerian, A., Youssefi, A. (2008). Combustion wave stability in diluted TiO₂/Al/C system in atmospheric air, Solid State Sci. 10, 1958–1969.

[9] Sheng-zhong, K., Guang-Ji, Xu., Yu-tian, D. (2001). Effect of carbon content on microstructure of in-situ Al₂O₃p-TiCp/Al composites, Trans. Nonferrous. Met. Soc. China. 11(5), 756–759.

[10] Lee, J.H., Ko, S.K., Won, C.W. (2001). Combustion characteristics of TiO₂/Al/C system, Mater. Res. Bull. 36, 1157–1167.

[11] Nayeri, S.F., Aboutalebi, M., Khaki, J.V. (2006). The effect of milling conditions on the mechanical alloying and combustion synthesis of TiO₂-Al-C powder mixture, Iranian Journal of Materials Science and Engineering, 3, 25-31.

[12] Zakeri, M., Rahimipour, M., Sadrnezhad, S., Yazdani-Rad, R. (2009). Preparation of Al₂O₃–TiC nanocomposite by mechano-chemical reduction of TiO₂ with aluminum and graphite, J. of alloys and compds. 481(1-2), 320-325.

[13] Hajalilou, A., Hashim, M., Nahavandi, M., Ismail, I. (2014). Mechanochemical carbo-aluminothermic reduction of rutile to produce TiC–Al₂O₃ nanocomposite, Advanced Powder Tech. 25(1), 423-429.

[14] Niyomwas, S. (2011). Synthesis and Characterization of TiC and TiC-Al₂O₃ Composite from Wood Dust by Self-Propagating High Temperature Synthesis, Energy Procedia, 9, 522 – 531.

[15] Mohammad Sharifi, E., Karimzadeh, F., Enayati, M.H. (2010). Mechanochemically synthesized Al₂O₃–TiC nanocomposite, J. of alloys and compds. 491(1-2), 411-415.

[16] Razavi, M., Rahimipour, M.R., Mansoori, R. (2008). Synthesis of TiC-Al₂O₃ nanocomposite powder from impure Ti chips, Al and carbon black by mechanical alloying., J. Alloys and Compds, 450(1-2), 463-467.

[17] Lee, W-Ch., Chung, Sh-L. (1997). Ignition Phenomena and Reaction Mechanisms of the Self-Propagating High-Temperature Synthesis Reaction in the Titanium-Carbon-Aluminum System, J. of American ceramic Society, 80(1), 53-61.

[18] Heshmatpour, F. Seyed Atashi, F. S. (2023). Synthesis and characterization of iron-based spinel nanoparticles with different coatings and their ability in photocatalytic degradation of methylene blue. Applied Chemistry, 18(68), 9-28 (in Persian).

[19] Mozaffari, M., Ebadi, A. (2021). Solvothermal synthesis of ZnTiO3 photocatalyst: Investigation of effect of pH and calcination temperature. Applied Chemistry, 16(58), 29-46 (in Persian).

[20] Ebadi, A., Mozaffari, M. (2020). Synthesis of alumina nanoparticles by coprecipitation method and studying the effect of temperature on the phases and the specific surface of the synthesized alumina. Applied Chemistry, 15(56), 213-224 (in Persian).

[21] Abedi, P., Mehrizadeh, H. (2020). Synthesis and modification of ZnFe₂O₄ nanocatalyst and study the photocatalytic removal Acid Blue 7 dye. Applied Chemistry, 1399 (Special Letter to the Fourth Conference on Applied Chemistry in Iran, August 1998), 50-57. (in Persian).

[22] Beigi, F., Manteghi, F. (2020). Investigation of cobalt-aluminum layered double hydroxide (Co-Al-LDH) performance in methyl orange adsorption. Applied Chemistry, 15(55), 299-312. (in Persian).

[23] Schaffer, G.B., McCormick, P.G. (1992). On the kinetics of mechanical alloying, Metall. Mater. Trans. 23A, 1285–1290.

[24] Schaffer, G.B., McCormick, P.G. (1989). Reduction of metal oxides by mechanical alloying, Appl. Phys. Lett. 55, 45–46.

[25] Takacs, L. (2002). Self-sustaining reactions induced by ball milling, Prog. Mater. Sci. 47, 355–414.

[26] Takacs, L. (2009). Self-sustaining reactions induced by ball milling, Int. J. Self-Propag. High- Temp. Synth. 18(4), 276–282.

[27] Setoudeh, N., Welham, N.J. (2015). Effect of carbon on mechanically induced self-sustaining reactions (MSR) in TiO₂–Al–C mixtures, Int. J. of Ref. Metals and Hard Mater. 54, 210–215

[28] Willis, P.E., Welham, N.J., Kerr, A. (1998). Ambient temperature formation of an alumina titanium carbide-metal ceramic, J. Eur. Ceram. Soc. 18(6), 701–708.

[29] Okamoto, H. (2011). O-Ti (oxygen-titanium), Journal of Phase Equilibria and Diffusion, 32(5), 473-474.

[30] Setoudeh, N., Saidi, A., Welham, N.J. (2005). Carbothermic reduction of anatase and rutile, J. Alloys Compd. 390, 138–143.

[31] Woo, Y-Ch., Kang, H-J., Kim, D.J. (2007). Formation of TiC particle during carbothermal reduction of TiO2, Journal of the European Ceramic Society, 27, 719–722.

[32] Ali, M., Projjal Basu, P. (2010). Mechanochemical synthesis of nano-structured TiC from TiO₂ powders, J. of Alloys and Compds. 500, 220–223.

[33] Mhadhbia M., Driss, M. (2021). Titanium Carbide: Synthesis, Properties and Applications, Brilliant Engineering, 2, 1-11.

[34] Wei, S., Bao-qiang, Xu., Bin, Y., Hong-yan, S. (2011). Preparation of TiC powders by carbothermal reduction method in vacuum, Trans. Nonferrous Met. Soc. China, 21, 185-190.

[35] Homayooni, F., Setoudeh, N., Mohassel, A., Heidari, F., Sajjadnejad, M. (2021). Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide, Journal of new Materials, 44(12), 65-82. doi: 10.30495/jnm.2021.29247.1942 (in Persian).

[36] Homayooni, F. (2022). Effect of metallic agent on the carbothermic reduction of titanium dioxide, Master of Science (M.Sc) Thesis, Yasouj University (in Persian).

[37] HSC Chemistry for Windows, Version 6.12, Outotec Research Oy, 2007.

[38] Ebrahimi-Kahrizsangi, R., Alimardani, M., Torabi, O. (2015). Investigation on mechanochemical behavior of the TiO2–Mg–C system reactive mixtures in the synthesis of titanium carbide, Int. J. of Ref. Metals and Hard Mater. 52, 90-97.

[39] Ali M. (2014). Transformation and powder Characteristics of TiO₂ during high energy milling, J. of Ceram. Processing Research. 15(5), 290-293.

[40] Setoudeh, N., Saidi, A., Shafyei A., Welham, N.J. (2006). Study of anatase-to-rutile phase transformation in milled and un-milled samples, Journal of Esteghlal, 25(1), 207-216 (in Persian).

[41] Ren, R., Yang, Z., Shaw, L.L. (2000). Polymorphic Transformation and powder characteristics of TiO₂ during high energy milling, Journal of Materials Science, 35, 6015-6026.