دانشگاه سمنان

 آمار

تعداد نشریات21
تعداد شماره‌ها704
تعداد مقالات10,142
تعداد مشاهده مقاله71,443,319
تعداد دریافت فایل اصل مقاله63,167,831
مسعودی, میلاد, گنجعلی, احمد, ایرانی, حمیدرضا, میرزاخانی, ابوذر. (1403). بررسی المان محدود استهلاک انرژی میراگر جاری شونده آگزتیک ساخته شده از آلیاژهای حافظه‌دار شکلی. هنرهای کاربردی, 22(77), 79-93. doi: 10.22075/jme.2023.29100.2366
میلاد مسعودی; احمد گنجعلی; حمیدرضا ایرانی; ابوذر میرزاخانی. "بررسی المان محدود استهلاک انرژی میراگر جاری شونده آگزتیک ساخته شده از آلیاژهای حافظه‌دار شکلی". هنرهای کاربردی, 22, 77, 1403, 79-93. doi: 10.22075/jme.2023.29100.2366
مسعودی, میلاد, گنجعلی, احمد, ایرانی, حمیدرضا, میرزاخانی, ابوذر. (1403). 'بررسی المان محدود استهلاک انرژی میراگر جاری شونده آگزتیک ساخته شده از آلیاژهای حافظه‌دار شکلی', هنرهای کاربردی, 22(77), pp. 79-93. doi: 10.22075/jme.2023.29100.2366
مسعودی, میلاد, گنجعلی, احمد, ایرانی, حمیدرضا, میرزاخانی, ابوذر. بررسی المان محدود استهلاک انرژی میراگر جاری شونده آگزتیک ساخته شده از آلیاژهای حافظه‌دار شکلی. هنرهای کاربردی, 1403; 22(77): 79-93. doi: 10.22075/jme.2023.29100.2366

بررسی المان محدود استهلاک انرژی میراگر جاری شونده آگزتیک ساخته شده از آلیاژهای حافظه‌دار شکلی

مدل سازی در مهندسی
دوره 22، شماره 77، شهریور 1403، صفحه 79-93    اصل مقاله (1.6 M)
نوع مقاله: مقاله پژوهشی
شناسه دیجیتال (DOI): 10.22075/jme.2023.29100.2366
نویسندگان
میلاد مسعودی1؛ احمد گنجعلی* 2؛ حمیدرضا ایرانی2؛ ابوذر میرزاخانی2
1دانشجوی دکتری، گروه مهندسی عمران، واحد شاهرود، دانشگاه آزاد اسلامی، شاهرود، ایران.
2استادیار، گروه مهندسی عمران، واحد شاهرود، دانشگاه آزاد اسلامی، شاهرود، ایران.
تاریخ دریافت: 07 آذر 1401،  تاریخ بازنگری: 13 آبان 1402،  تاریخ پذیرش: 21 آبان 1402 
چکیده
در پژوهش حاضر، یک میراگر فلزی جاری شونده جدید از جنس آلیاژهای حافظه‌دار شکلی به منظور استهلاک انرژی و کنترل خسارت در اعضاء اصلی سازه‌های فلزی ارائه شده است، که از یک قسمت اصلی با هندسه آگزتیک و ساختار ضریب پواسون منفی تشکیل شده است، که از طریق تغییرشکل پلاستیک انرژی را جذب می‌کند. به منظور بررسی قابلیت جذب انرژی میراگر ارائه شده، مجموعه‌ای از تحلیل‌های غیرخطی شبه استاتیکی تحت بارگذاری کشش مستقیم و به کمک نرم‌افزار ABAQUS بر روی میراگر با پارامترهای هندسی مختلف انجام پذیرفته است. رفتار سوپرالاستیک آلیاژهای حافظه‌دار شکلی با استفاده از روابط ساختاری برینسون و به کمک زیربرنامه UMAT تعریف شده است. نتایج بررسی‌های المان محدود، نشان دهنده میزان شکل‌پذیری قابل قبول المان پیشنهادی و قابلیت بالای استهلاک انرژی می‌باشد. همچنین، مشاهده می‌شود که در حالت بهینه انرژی جذب شده ویژه و شکل‌پذیری میراگر آگزتیک پیشنهادی از جنس آلیاژ حافظه‌دار شکلی به ترتیب برابر J/kg 39/2 و 44 به دست می‌آید که به ترتیب در حدود 114% و 81% بیشتر از میراگر فولادی متناظر می‌باشد. بنابراین، میراگر جدید ارائه شده می‌تواند با رفتار شکل‌پذیر خود مقدار زیادی از انرژی ورودی را مستهلک نماید و به علت سادگی و عملکرد بالا جایگزین بسیاری از میراگرهای فلزی موجود شود.
کلیدواژه‌ها
میراگر جاری شونده آگزتیک؛ آلیاژ حافظه‌دار شکلی؛ استهلاک انرژی؛ شکل‌پذیری؛ المان محدود غیرخطی
عنوان مقاله [English]
Energy Absorption of Auxetic Metallic Yield Damper Made of Shape Memory Alloys
نویسندگان [English]
Milad Masodi1؛ Ahmad Ganjali2؛ Hamidreza Irani2؛ Aboozar Mirzakhani2
1PHD Student, Department of Civil Engineering, Shahrood Branch, Islamic Azad University, Shahroud, Iran.
2Assistant professor, Department of Civil Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran
چکیده [English]
In the present study, we present a novel shape memory alloy metallic yielding dampers for energy dissipation and damage control in the steel structural members, composed of an auxetic main member and a negative Poisson member that absorbs energy by plastic deformation mechanism. Using the ABAQUS software, a set of quasi-static nonlinear analyses were performed on the metallic yielding damper with different geometric parameters in order to predict its energy absorption capacity under direct traction loading. The superelastic behavior of the shape memory alloys is defined by using the Brinson's structural relationships with the UMAT subroutine. It has been verified through a finite element analysis that the proposed element is both highly ductile and capable of dissipating high amounts of energy. In the optimal state, the specific absorbed energy and the ductility of the proposed asbestos damper made of memory alloy are 39.2 J/kg and 44, respectively, which are about 114% and 81% higher than the corresponding steel dampers. Thus, this new damper is capable of consuming quite a lot of input energy with its unique ductile behavior, while at the same time being able to replace quite a few existing metal dampers due to its simplicity and high performance.
.
کلیدواژه‌ها [English]
Auxetic metallic yielding damper, Shape memory alloy, Energy dissipation, Ductility, Nonlinear finite element
مراجع
  1. E. Mirzaei. and F. Daneshjoo. "Introduction of a new elliptical damper for seismic energy dissipation of civil structures." Sharif Journal of Civil Engineering 37.2. no. 4.2 (2022): 39-50.
  2. G. Xu, and J. Ou. "Seismic performance of combined rotational friction and flexural yielding metallic dampers". Journal of Building Engineering 132 (2022): 104059.
  3. H.N. Li, X. Fu, Y.L. Li, and H.J. Liu. "Mechanical model and structural control performance of a new rotation-magnified viscoelastic damper." Engineering Structures 252 (2022): 113569.
  4. Y.C. Kim, S.J. Mortazavi, A. Farzampour, J.W. Hu, I. Mansouri, and P.O. Awoyera. "Optimization of the Curved Metal Damper to Improve Structural Energy Dissipation Capacity." Buildings 12. no. 1 (2022): 67.
  5. A. Downey, C. Theisen, H. Murphy, N. Anastasi, and S. Laflamme. "Cam-based passive variable friction device for structural control." Engineering Structures 188. (2019): 430-439.
  6. M. Rezaee, and V. Arab Maleki. "Passive vibration control of fluid conveying pipes using dynamic vibration absorber." Amirkabir Journal of Mechanical Engineering 51. no. 3 (2019): 111-120.
  7. M. Nasrabadi, A.V. Sevbitov, V.A. Maleki, N. Akbar, and I. Javanshir. "Passive fluid-induced vibration control of viscoelastic cylinder using nonlinear energy sink". Marine Structures 81. (2022): 103116.
  8. Y. Chen, W. Yu, M. Zhang, and Y. Li. "A novel energy dissipation damper for multi-level earthquakes." Journal of Constructional Steel Research 192 (2022): 107214.
  9. J. Wang, L. Guo, and W. Wang. "Experimental and theoretical analysis of novel shear-Flexural combined metallic damper." Soil Dynamics and Earthquake Engineering 157 (2022): 107249.
  10. Y.Q. Jia, C. Wang, L.Z. Li, R.F. Zhang, and Z.D. Lu. "Residual Seismic Performance of Fire-Damaged Reinforced Concrete Frame Structure with Metallic Yielding Dampers". Journal of Structural Engineering 148. no. 4 (2022): 04022003.
  11. R.W. Chan, and F. Albermani. "Experimental study of steel slit damper for passive energy dissipation." Engineering Structures 30. no. 2 (2008): 1058-1066.
  12. R.K. Mohammadi, A. Nasri, and A. Ghaffary. "TADAS dampers in very large deformations." International Journal of Steel Structures 17. no. 2 (2017): 515-524.
  13. T. Balendra, C.H. Yu, and F.L. Lee. "An economical structural system for wind and earthquake loads." Engineering Structures 23. no. 5 (2001): 491-501.
  14. S. Maleki, and S. Mahjoubi. "Infilled-pipe damper." Journal of Constructional Steel Research 98 (2014): 45-58.
  15. W. Guo, C. Ma, Y. Yu, D. Bu, and C. Zeng. "Performance and optimum design of replaceable steel strips in an innovative metallic damper." Engineering Structures 205 (2020): 110118.
  16. M.G. Azandariani, A.G. Azandariani, and H. Abdolmaleki. "Cyclic behavior of an energy dissipation system with steel dual-ring dampers (SDRDs)." Journal of Constructional Steel Research 172 (2020): 106145.
  17. W. Jiang, , X. Ren, S.L. Wang, X.G. Zhang, X.Y. Zhang, C. Luo, Y.M. Xie, F. Scarpa, A. Alderson, and K.E. Evans. "Manufacturing, characteristics and applications of auxetic foams: a state-of-the-art review." Composites Part B: Engineering. (2022): 109733.
  18. A. Behravanrad, and M. Jafari. "Thermoporoelasticity analysis of variable thickness and elastically restrained functionally graded auxetic metamaterial circular plate resting on an auxetic material circular plate." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235. no. 16. (2020): 3036-3057.
  19. E. Altas, F. Khosravi, H. Gokkaya, V.A. Maleki, Y. Akınay, O. Ozdemir, O. Bayraktar, and H. Kandas. "Finite element simulation and experimental investigation on the effect of temperature on pseudoelastic behavior of perforated Ni–Ti shape memory alloy strips." Smart Materials and Structures 31. no. 2 (2022): 025031.
  20. Q. Gao, Z. Ding, and W.H. Liao. "Effective elastic properties of irregular auxetic structures." Composite Structures 287 (2022): 115269.
  21. Y. Zhang, L. Sun, X. Ren, X.Y. Zhang, Z. Tao, and Y.M. Xie. "Design and analysis of an auxetic metamaterial with tuneable stiffness." Composite Structures 281 (2022): 114997.
  22. R. Lakes. "Foam structures with a negative Poisson's ratio." Science 235, no. 4792 (1987): 1038-1040.
  23. S. Shukla, and B. Behera. "Auxetic Fibrous Structures and their Composites: A Review." Composite Structures. (2022): 115530.
  24. X. Ren, J. Shen, A. Ghaedizadeh, H. Tian, and Y.M. Xie. "A simple auxetic tubular structure with tuneable mechanical properties." Smart Materials and Structures 25. no. 6. (2016): 065012.
  25. J. Zhang, G. Lu, and Z. You. "Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review." Composites Part B: Engineering 201 (2020): 108340.
  26. K. Meena, and S. Singamneni. "A new auxetic structure with significantly reduced stress concentration effects." Materials & Design 173 (2019): 107779.
  27. Y. Guo, J. Zhang, L. Chen, B. Du, H. Liu, L. Chen, W. Li, and Y. Liu. "Deformation behaviors and energy absorption of auxetic lattice cylindrical structures under axial crushing load." Aerospace Science and Technology 98 (2020): 105662.
  28. H. Hassanin, A. Abena, M.A. Elsayed, and K. Essa. "4D printing of NiTi auxetic structure with improved ballistic performance." Micromachines 11. no. 8 (2020): 745.
  29. R. Jafari Nedoushan. "Improvement of energy absorption of expanded metal tubular structures under compressive loads." Thin-Walled Structures 157 (2020): 107058.
  30. H. Shahverdi Moghaddam, S.R. Keshavanarayana, C. Yang, and A.L. Horner. "Anisotropic hyperelastic constitutive modeling of in-plane finite deformation responses of commercial composite hexagonal honeycombs." Journal of Sandwich Structures & Materials 24. no.1 (2022): 5-34.
  31. W. Wang, J. Wang, H. Hai, W. Xu, and X. Yu. "Study of in-plane mechanical properties of novel ellipse-based chiral honeycomb structure." Applied Sciences 12. no. 20 (2022): 10437.
  32. H.H. Xu, H.C. Luo, X.G. Zhang, W. Jiang, X.C. Teng, W.Q. Chen, J. Yang, Y.M. Xie, and X. Ren. "Mechanical properties of aluminum foam filled re-entrant honeycomb with uniform and gradient designs." International Journal of Mechanical Sciences 244 (2023): 108075.
  33. C. Zhang , Y. Zhu, F. Lu, J. Wu, and Z. Wu. "On the effective elastic constants of anti-tetra chiral tubular structure." Engineering Structures 278 (2023): 115507.
  34. A. Namvar, I. Moloukzadeh, A. Zolfagharian, F. Demoly, and M. Bodaghi. "Bio-inspired design, modeling, and 3D printing of lattice-based scale model scooter decks." The International Journal of Advanced Manufacturing Technology 126. no. 7-8 (2023): 2887-2903.
  35. D.T. Dong, N.T. Phuong, V.H. Nam, L.N. Ly, N.V. Tien, V.M. Duc, T.Q. Minh, V.T. Hung, and N.T.H. Giang. "An analytical approach for nonlinear buckling analysis of torsionally loaded sandwich carbon nanotube reinforced cylindrical shells with auxetic Core." Adv. Appl. Math. Mech 15 (2023): 468-484.
  36. A. Hamrouni, J.L. Rebiere, A. El Mahi, M. Beyaoui, and M. Haddar. "Experimental and finite element analyses of a 3D printed sandwich with an auxetic or non-auxetic core." Journal of Sandwich Structures & Materials 25. no. 4 (2023): 426-444.
  37. C. Qi, , L.Z. Pei, A. Remennikov, S. Yang, and F. Jiang. "Numerical and theoretical analysis of crushing strength of 3D re-entrant honeycomb." Thin-Walled Structures 182 (2023): 110140.
  38. M.B. Francisco, J.L.J. Pereira, G.A. Oliver, L.R. Roque da Silva, S.S. Cunha Jr, and G.F. Gomes. "A review on the energy absorption response and structural applications of auxetic structures." Mechanics of Advanced Materials and Structures 29. no. 27 (2022): 5823-5842.
  39. H. Yin, W. Zhang, L. Zhu, F. Meng, J. Liu, and G. Wen. "Review on lattice structures for energy absorption properties. "Composite Structures 304 (2023): 116397.
  40. R.A. Gomes, L.A. de Oliveira, M.B. Francisco, and G.F. Gomes. "Tubular auxetic structures: A review." Thin-Walled Structures 188 (2023): 110850.
  41. L. Li, F. Yang, S. Zhang, Z. Guo, L. Wang, X. Ren, and M. Zhao. "A novel hybrid auxetic honeycomb with enhanced load-bearing and energy absorption properties." Engineering Structures 289 (2023): 116335.
  42. W. Zhang, H. Yin, Y. Wu, Q. Jin, L. Wu, G. Wen, J. Liu, and X. Wu. "A Novel Auxetic 3D Lattice Structure for Enhancing Energy Absorption." Composite Structures (2023): 117620.
  43. L. Brinson, and R. Lammering. "Finite element analysis of the behavior of shape memory alloys and their applications." International Journal of solids and structures 30 . no .23 (1993): 3261-3280.
  44. L.C. Brinson. "One-dimensional constitutive behavior of shape memory alloys: thermomechanical derivation with non-constant material functions and redefined martensite internal variable." Journal of intelligent material systems and structures 4 . no. 2 (1993): 229-242.
  45. S. Barbarino, E.S. Flores, R.M. Ajaj, I. Dayyani, and M.I. Friswell. "A review on shape memory alloys with applications to morphing aircraft." Smart materials and structures 23. no. 6 (2014): 063001.
  46. M. Rezaee, H. Javadian, and V. A Maleki. "Investigation of Vibration Behavior and Crack Detection of a Cracked Short Cantilever Beam under the Axial Load." Amirkabir Journal of Mechanical Engineering 47. no. 2 (2016): 1-12.
  47. J. Esmaeili, K. Andalibi, O. Gencel, F.K. Maleki, and V.A. Maleki. "Pull-out and bond-slip performance of steel fibers with various ends shapes embedded in polymer-modified concrete." Construction and Building Materials 271 (2021): 121531.
  48. M.E. Toygar, O. Sayman, U. Kemiklioğlu, H. Öztürk, Z. Kıral, and F.K. Maleki. "Vibration and buckling analysis of a curved sandwich composite beam with FEM." Res Eng Struct Mater 2 (2016): 49-59.
  49. V.A. Maleki, and N. Mohammadi. "Buckling analysis of cracked functionally graded material column with piezoelectric patches." Smart Materials and Structures 26. no. 3 (2017): 035031.
  50. M.E. Toygar, K.F. Tee, F.K. Maleki, and A.C. Balaban. "Experimental, analytical and numerical study of mechanical properties and fracture energy for composite sandwich beams." Journal of Sandwich Structures & Materials 21. no.3 (2019): 1167-1189.
  51. P. Vahidi Pashaki, M. Pouya, and V.A. Maleki. "High-speed cryogenic machining of the carbon nanotube reinforced nanocomposites: Finite element analysis and simulation." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232. no. 11 (2018): 1927-1936.
  52. M. Ghaderi, V.A. Maleki, and K. Andalibi. "Retrofitting of unreinforced masonry walls under blast loading by FRP and spray on polyurea." Cumhuriyet Üniversitesi Fen Fakültesi Fen Bilimleri Dergisi 36. no.4 (2015): 462-477.
  53. R. Mehrabi, M. Dorri, and M. Elahinia. "Finite element simulation of NiTi umbrella-shaped implant used on femoral head under different loadings." Bioengineering 4. no. 1 (2017): 23.
  54. S. Maleki, and S. Mahjoubi. "Dual-pipe damper". Journal of Constructional Steel Research 85 (2013): 81-91.
  55. K.C. Tsai, H.W. Chen, C.P. Hong, and Y.F. Su. "Design of steel triangular plate energy absorbers for seismic-resistant construction." Earthquake spectra 9. no.3 (1993): 505-528.
  56. S. Maleki, and S. Bagheri, "Pipe damper, Part I: Experimental and analytical study." Journal of Constructional Steel Research 66. no.8-9 (2010): 1088-1095.
  57. Z. Li, F. Albermani, R.W. Chan, and S. Kitipornchai. "Pinching hysteretic response of yielding shear panel device." Engineering structures 33. no.3 (2011): 993-100.
آمار
تعداد مشاهده مقاله: 819
تعداد دریافت فایل اصل مقاله: 675


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب