پیوندهای مفید
آمار
| تعداد نشریات | 22 |
| تعداد شمارهها | 712 |
| تعداد مقالات | 10,258 |
| تعداد مشاهده مقاله | 72,004,576 |
| تعداد دریافت فایل اصل مقاله | 63,754,937 |
Assessing the Effect of Sediment Deposits on the Performance of Residential Heating Radiators: An Experimental Investigation | ||
| Journal of Heat and Mass Transfer Research | ||
| دوره 11، شماره 2 - شماره پیاپی 22، بهمن 2024، صفحه 167-178 اصل مقاله (767.88 K) | ||
| نوع مقاله: Full Length Research Article | ||
| شناسه دیجیتال (DOI): 10.22075/jhmtr.2024.31840.1479 | ||
| نویسندگان | ||
| Mahboobeh Ebrahimi1؛ Mousa Farhadi* 1؛ Alireza Rezaniakolaei2 | ||
| 1Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran | ||
| 2Department of Energy Technology, Aalborg University, Denmark | ||
| تاریخ دریافت: 28 شهریور 1402، تاریخ بازنگری: 18 فروردین 1403، تاریخ پذیرش: 21 فروردین 1403 | ||
| چکیده | ||
| In this investigation, we present pioneering findings on the detrimental effects of sediment deposits on the thermal and hydraulic performance of residential heating radiators through a novel experimental framework. Our approach, through the systematic introduction of particulate matter into the water circuit, quantifies the real-world impact of sediment accumulation. This methodology fills a significant void in literature with validated experimental data and establishes a method for assessing radiator performance under fouled conditions, adhering to ISO 3148 standards. The experimental results underscore a significant efficiency downturn: sediment presence increased pressure drop by up to 10.5% and reduced surface temperature by as much as 13%. Notably, heat output initially saw a slight increase, only to decrease by up to 28.5% over time, with these effects amplifying at higher inlet temperatures. These findings underscore the urgent need for tailored maintenance strategies to combat sediment-related degradation, offering invaluable insights for the design, maintenance, and optimization of heating systems beneficial to both industry stakeholders and end-users. | ||
| کلیدواژهها | ||
| Home heating radiator؛ Fouling؛ ISO 3148؛ Heat transfer؛ Pressure drop | ||
| عنوان مقاله [English] | ||
| بررسی آزمایشگاهی تأثیر رسوب بر عملکرد رادیاتورهای گرمایش خانگی | ||
| چکیده [English] | ||
| در این پژوهش، یافتههای نوآورانهای در مورد اثرات مخرب رسوبات بر عملکرد حرارتی و هیدرولیکی رادیاتورهای گرمایشی مسکونی از طریق چارچوب تجربی بدیع ارائه شده است. رویکرد ما، از طریق معرفی سیستماتیک مواد ذرهای به مدار آب، تاثیر واقعی تجمع رسوب را کمیسازی میکند. این روششناسی، با دادههای تجربی تایید شده، خلأ قابل توجهی در تحقیقات موجود را پر میکند و روشی برای ارزیابی عملکرد رادیاتور تحت شرایط آلوده مطابق با استانداردهای ISO 3148 ارائه میدهد. نتایج تجربی، کاهش قابل توجهی در کارایی را نشان میدهد: حضور رسوب، افت فشار را تا 10.5٪ افزایش داده و دمای سطح را تا 13٪ کاهش داده است. به طور قابل توجهی، خروجی حرارتی در ابتدا شاهد افزایش جزئی بود، اما با گذشت زمان تا 28.5 درصد کاهش یافت، این تاثیرات با افزایش دمای ورودی بیشتر تشدید میشود. این یافتهها، نیاز فوری به استراتژیهای نگهداری متناسب برای مقابله با تخریب مرتبط با رسوب را برجسته میکند، بینشهای بینظیری برای طراحی، نگهداری، و بهینهسازی سیستمهای گرمایشی ارائه میدهد که به نفع ذینفعان صنعت و کاربران نهایی است | ||
| کلیدواژهها [English] | ||
| رادیاتور گرمایش خانگی, رسوب, انتقال حرارت, افت فشار, استاندارد ISO 3148 | ||
| مراجع | ||
|
[1] Calisir, T., Baskaya, S., Yazar, H. O., Yucedag, S., 2015. Experimental investigation of panel radiator heat output enhancement for efficient thermal use under actual operating conditions. EPJ Web of Conferences, 92, 02010. doi: 10.1051/epjconf/20159202010. [2] Liu, Z., Xu, W., Li, Z., Zhang, L., Li, J., Li, A., Feng, A., 2021. Research on heating performance of heating radiator at low temperature. Journal of Building Engineering, 36, 102016. doi: 10.1016/j.jobe.2020.102016. [3] Cholewa, T., Rosiński, M., 2010. Heat transfer in rooms with panel heating systems. Conference Paper, January 2010. [4] Teskeredzic, A., Blazevic, R., 2018. Transient Radiator Room Heating—Mathematical Model and Solution Algorithm. Buildings Journal, 8, 163. doi: 10.3390/buildings8110163. [5] Erdoğmuş, A. B., 2011. Simulation of the heater test room defined by EN 442 standard and virtual testing of different type of heaters. Thesis (Doctor of Philosophy in Mechanical Engineering). [6] Myhren, J. A., Holmberg, S., 2013. Performance evaluation of ventilation radiators. Applied Thermal Engineering, 51, pp. 315-324. doi: 10.1016/j.applthermaleng.2012.08.030. [7] Rahmati, A. R., Gheibi, A., 2020. Experimental and numerical analysis of a modified hot water radiator with improved performance. International Journal of Thermal Sciences, 149, 106175. doi: 10.1016/j.ijthermalsci.2019.106175. [8] Calisir, T., Yazar, H. O., Baskaya, S., 2019. Thermal performance of PCCP panel radiators for different convector dimensions – An experimental and numerical study. International Journal of Thermal Sciences, 137, pp. 375–387. doi: 10.1016/j.ijthermalsci.2018.12.007. [9] Zhenhua, Q., Yongchang, C., Chongfang, M.A., 2008. Experimental study of fouling on heat transfer surface during forced convective heat transfer. Chinese Journal of Chemical Engineering, 16(4), pp. 535-540. doi: 10.1016/S1004-9541(08)60117-2. [10] Sulaiman, M. A., Kuye, S. I., Owolabi, S. A., 2016. Investigation of fouling effect on overall performance of shell and tube heat exchanger in a urea fertilizer production company in Nigeria. Nigerian Journal of Technology (NIJOTECH), 35(1), pp. 129-136. doi: 10.4314/njt.351.1074. [11] Barrow, H., Sherwin, K., 1994. Theoretical investigation of the effect of fouling on the performance of a tube and plate fin heat exchanger. Heat Recovery Systems & CHP, 14(1), pp. 1-5. doi: 10.1016/0890-4332(94)90066-3. [12] Khodabandeh, E., Rozati, S. A., Joshaghani, M., Akbari, O. A., Akbari, S., Toghraie, D., 2018. Thermal performance improvement in water nanofluid/GNP–SDBS in novel design of double-layer microchannel heat sink with sinusoidal cavities and rectangular ribs. Journal of Thermal Analysis and Calorimetry. doi: 10.1007/s10973-018-7826-2. [13] Arasteh, H., Mashayekhi, R., Ghaneifar, M., Toghraie, D., Afrand, M., 2019. Heat transfer enhancement in a counter-flow sinusoidal parallel-plate heat exchanger partially filled with porous media using metal foam in the channels’ divergent sections. Journal of Thermal Analysis and Calorimetry. doi: 10.1007/s10973-019-08870-w. [14] Esfe, M. H., Motallebi, S. M., Toghraie, D., Hatami, H., Experimental study and viscosity modeling by adding oxide nanoparticles to oil to improve the performance. Tribology International. doi: 10.1016/j.triboint.2023.109031. [15] Abu-Zald, M., 1992. A new technique for the measurement of fouling of heat transfer surfaces. Com. Heat Mass Transfer, 19, pp. 117-125. doi: 10.1016/0735-1933(92)90069-T. [16] Cremaschi, L., Barve, A., Wu, X., 2012. Effect of condensation temperature and water quality on fouling of brazed-plate heat exchangers. ASHRAE Transactions, 118(1), pp. 1086-1100. [17] Awad, M. M., 2012. Influence of surface temperature on surface fouling–theoretical approach. Life Science Journal, 9(3), pp. 1733-1741. [18] Xu, Z., Han, Z., Sun, A., Yu, X., 2019. Numerical study of particulate fouling characteristics in a rectangular heat exchange channel. Applied Thermal Engineering, 154, pp. 657–667. doi: 10.1016/j.applthermaleng.2019.03.142. [19] Wang, L.-C., Li, S.-F., Wang, L.-B., Cui, K., Zhang, Q.-L., Liu, H.-B., Li, G., 2016. Relationships between the characteristics of CaCO3 fouling and the flow velocity in smooth tube. Experimental Thermal and Fluid Science, 74, pp. 143-159. doi: 10.1016/j.expthermflusci.2015.12.001. [20] International Standard ISO 3148, 1975. Radiators, convectors and similar appliances – Determination of thermal output - Test method using air-cooled closed booth. [21] Pahlavanzadeh, H., Jafari Nasr, M.R., Mozaffari, S.H., 2007. Experimental study of thermo-hydraulic and fouling performance of enhanced heat exchangers. International Communications in Heat and Mass Transfer, 34, pp. 907–916. doi: 10.1016/j.icheatmasstransfer.2007.04.002. [22] Kline, S., McClintock, F., 1953. Describing uncertainties in single-sample experiments. Mechanical Engineering, 75, pp. 3-8. [23] Ward, I. C., BSc, 1991. Domestic radiators: Performance at lower mass flow rates and lower temperature differentials than those specified in standard performance tests. Building Services Engineering, 12(3), pp. 87-94. doi: 10.1177/014362449101200301. | ||
|
آمار تعداد مشاهده مقاله: 693 تعداد دریافت فایل اصل مقاله: 811 |
||