[1] Katiyar, J. K., Sinha, S. K., and Kumar, A., 2016. Friction and Wear Durability Study of Epoxy-Based Polymer (SU-8) Composite Coatings with Talc and Graphite as Fillers. Wear, 362–363, pp. 199–208.
[2] Kumar, M., Saini, J. S., and Bhunia, H., 2020. Performance of Mechanical Joints Prepared from Carbon-Fiber-Reinforced Polymer Nanocomposites under Accelerated Environmental Aging. J. Mater Eng Perform, 29(11), pp. 7511–7525.
[3] Suyambulingam, I., Rangappa, S.M. and Siengchin, S., 2023. Advanced Materials and Technologies for Engineering Applications. Applied Science and Engineering Progress, 16(3), pp.6760-6760.
[4] Palaniappan, S.K., Singh, M.K., Rangappa, S.M. and Siengchin, S., 2023. Eco-friendly Biocomposites: A Step Towards Achieving Sustainable Development Goals. Composites, 7(12).
[5] Singh, M. K., and Zafar, S., 2020. Abrasive Wear Mechanism of Microwave-Assisted Compression Molded Kenaf/Hdpe Composite. J. Tribol, 142(10).
[6] Marya, M., 2008. A Brief Review of Challenges & Technologies to Weld Dissimilar Metals in Two Industries: The Upstream Oil & Gas and the Automotive. Materials Science Forum, 580–582, pp. 155–158.
[7] Shahapurkar, K., Chenrayan, V., Tesfamarium, B. B., Soudagar, M. E. M., Hossain, N., Rajhi, A. A., Alamri, S., Alarifi, I. M., Shahapurkar, P., Mujtaba, M. A., Kiran, M. C., and Ahmed, G. M. S., 2021. Parametric Analysis of Epoxy/Crumb Rubber Composite by Using Taguchi—GRA Hybrid Technique. Polymers (Basel), 13(19).
[8] Shahapurkar, K., Chenrayan, V., Soudagar, M. E. M., Badruddin, I. A., Shahapurkar, P., Elfasakhany, A., Mujtaba, M. A., Haque Siddiqui, M. I., Ashraf Ali, M., and Meurah Indra Mahlia, T., 2021. Leverage of Environmental Pollutant Crump Rubber on the Dry Sliding Wear Response of Epoxy Composites. Polymers (Basel), 13(17).
[9] Nagoriya, H., and Arora, G., 2024. Pin-On-Disk Computational Analysis: A Powerful Tool for Characterizing the Mechanical Properties of Polymers and Polymer Composites. Recent Advances in Mechanical Engineering, Vol. 1, G. Raghavendra, B.B.V.L. Deepak, and M. Gupta, eds., Springer Nature Singapore, pp. 199–214.
[10] Johnson, B. B., Santare, M. H., Novotny, J. E., and Advani, S. G., 2009. Wear Behavior of Carbon Nanotube/High-Density Polyethylene Composites. Mechanics of Materials, 41(10), pp. 1108–1115.
[11] Chenrayan, V., Vaishnav, V., Shahapurkar, K., Manivannan, C., Tirth, V., Alarifi, I. M., Alamir, M. A., Pruncu, C. I., and Lamberti, L., 2023. Tribological Performance of TiB2-Graphene Al 7075 Hybrid Composite Processed through Squeeze Casting: At Room and High Temperature. Tribol Int, 185, p. 108486.
[12] Shahapurkar, K., Ramesh, S., Nik-Ghazali, N.-N., Chenrayan, V., MC, K., Kanaginahal, G., Soudagar, M. E. M., Fouad, Y., and M.A.Kalam, 2024. Influence of Habesha Eggshell on the Dry Sliding Wear Behavior of Epoxy Composites. Biomass Convers Biorefin.
[13] Kumar, M., Saini, J. S., Bhunia, H., and Chowdhury, S. R., 2021. Behavior of Mechanical Joints Prepared from EB Cured CFRP Nanocomposites Subjected to Hygrothermal Aging Under Bolt Preloads. Applied Composite Materials, 28(2), pp. 271–296.
[14] Kumar, M., Saini, J. S., Bhunia, H., and Chowdhury, S. R., 2021. Aging of Bolted Joints Prepared from Electron-Beam-Cured Multiwalled Carbon Nanotube-Based Nanocomposites with Variable Torques. Polym Compos, 42(8), pp. 4082–4104.
[15] Kumar, M., Saini, J. S., and Bhunia, H., 2021. Investigations on MWCNT Embedded Carbon/Epoxy Composite Joints Subjected to Hygrothermal Aging under Bolt Preloads. Fibers and Polymers, 22(7), pp. 1957–1975.
[16] Bhowmik, P., and Arora, G., 2022. Graphene/Metal Matrix Nanocomposites: Synthesis, Characterization, and Properties. Metal Matrix Composites, pp. 109–148.
[17] Shahapurkar, K., Chavan, V. B., Doddamani, M., and Kumar, G. C. M., 2018. Influence of Surface Modification on Wear Behavior of Fly Ash Cenosphere/Epoxy Syntactic Foam. Wear, 414–415, pp. 327–340.
[18] Arora, G., Singh, M. K., Pathak, H., and Zafar, S., 2021. Micro-Scale Analysis of HA-PLLA Bio-Composites: Effect of the Interpenetration of Voids on Mechanical Properties. Mater Today Commun, 28(June), p. 102568.
[19] Shahapurkar, K., Soudagar, M. E. M., Shahapurkar, P., Mathapathi, M., Khan, T. M. Y., Mujtaba, M. A., Ali, M. D. I., Thanaiah, K., Siddiqui, M. I. H., and Ali, M. A., 2022. Effect of Crump Rubber on the Solid Particle Erosion Response of Epoxy Composites. J. Appl Polym Sci, 139(2), p. 51470.
[20] Woldman, M., Van Der Heide, E., Tinga, T., and Masen, M. A., 2017. A Finite Element Approach to Modeling Abrasive Wear Modes. Tribology Transactions, 60(4), pp. 711–718.
[21] Arora, G., and Pathak, H., 2020. Multi-Scale Computational Analysis of Carbon-Nanotube–Polymer Composite. Advances in Mechanical Engineering, pp. 205–216.
[22] Arora, G., and Pathak, H., 2019. Multi-Scale Fracture Analysis of Fibre-Reinforced Composites. Materials Today: Proceedings, pp. 687–695.
[23] Arora, G., and Pathak, H., 2019. Numerical Study on the Thermal Behavior of Polymer Nano-Composites. J. Phys Conf Ser, 1240, p. 012050.
[24] Highest recorded temperature on Earth | Guinness World Records (https://www.guinnessworldrecords.com/world-records/highest-recorded-temperature).
[25] World Weather and Climate Extremes Archive (https://wmo.int/site/world-weather-and-climate-extremes-archive).
[26] Yevtushenko, A. A., and Grzes, P., 2020. Initial Selection of Disc Brake Pads Material Based on the Temperature Mode. Materials, 13(4), p. 822.
[27] Serrano-Munoz, I., Magnier, V., Brunel, F., and Dufrenoy, P., 2022. Influence of the Composition on the Compressive Behaviour of a Semi-Metallic Brake-Pad Material. Materials, 15(22), p. 7911.
[28] Bijwe, J., and Kumar, M., 2007. Optimization of Steel Wool Contents in Non-Asbestos Organic (NAO) Friction Composites for Best Combination of Thermal Conductivity and Tribo-Performance. Wear, 263(7–12), pp. 1243–1248.
[29] Kumbhar, B. K., Patil, S. R., & Sawant, S. M., 2017. A Comparative Study on Automotive Brake Testing Standards. Journal of The Institution of Engineers (India): Series C, 98(4), pp. 527–531. https://doi.org/10.1007/s40032-016-0289-y.
