مدل‌سازی عددی و تحلیلی انحراف بزرگ همراه با فرورفتگی موضعی تیر ساندویچی تحت بارگذاری عرضی شبه استاتیکی

[1] M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, and H.N.C. Wadley. "Metal foam: a design guide. " Washington: Butterworth, (2000).

[2] M.T. Tilbrook, V.S. Deshpande, and N.A. Fleck. "The impulsive response of sandwich beams: analytical and numerical investigation of regimes of behavior. " Journal of the Mechanics and Physics of Solids, no. 54 (2006): 2242–2280.

[3] S.Q. Li, X. Li, Z.H. Wang, G.Y. Wu, G.X. Lu, and L.M. Zhao. "Finite element analysis of sandwich panels with stepwise graded aluminum honeycomb cores under blast loading. " Composite Part A, no. 80 (2016): 1–12.

[4] Z.W. Zhou, Z.H. Wang, L.M. Zhao, and X.F. Shu. "Experimental investigation on the yield behavior of Nomex honeycombs under combined shear-compression. " Latin American Journal of Solids and Structures, no. 9 (2012): 515–530.

[5] T. Jin, Z.W. Zhou, Z.H. Wang, G.Y. Wu, and X.F. Shu. "Experimental study on the effects of specimen in-plane size on the mechanical behavior of aluminum hexagonal honeycombs." Material Science Engineering A, no. 635 (2015): 23–35.

[6] H.J. Rathbun, F.W. Zok, S.A. Waltner, C. Mercer, A.G. Evans, and D.T. Queheillalt. "Structural performance of metallic sandwich beams with hollow truss cores. " Acta Materialia, no. 54 (2006): 5509–5518.

[7] P.W. Zhang, Z.H. Wang, and L.M. Zhao. "Dynamic crushing behavior of open-cell aluminum foam with negative Poisson's ratio. "Journal of Applied Physics A, no. 123 (2017): 311-321.

[8] Z.F. Liu, W.Q. Hao, J.M. Xie, J.S. Lu, R. Huang, and Z.H. Wang. "Axial-impact buckling modes and energy absorption properties of thin-walled corrugated tubes with sinusoidal patterns." Thin Walled Structures, no. 94 (2015): 410–423.

[9] C. Kılıçaslan, İ.K. Odacı, and M. Güden. "Single- and double-layer aluminum corrugated core sandwiches under quasi-static and dynamic loadings." Journal of Sandwich Structures and Material, no. 18 (2016): 667–692.

[10] S.Q. Li, G.X. Lu, Z.H. Wang, L.M. Zhao, and G.Y. Wu. "Finite element simulation of metallic cylindrical sandwich shells with graded aluminum tubular cores subjected to internal blast loading." International Journal of Mechanical Sciences, no. 96 (2015): 1–12.

[11] H.W. Yang, J.X. Hu, L, Xu, and G.Y. Lu. "Peripheral deformation and buckling of stainless steel hemispherical shells compressed by a flat plate." Latin American Journal of Solids and Structures, no. 13 (2016): 257–271.

[12] P.W. Zhang, X. Li, T. Jin, Z.H. Wang, and L.M. Zhao. "Dynamic response of circular metallic sandwich panels under projectile impact. " Journal of Sandwich Structures and Material, no. 19 (2016): 572–594.

[13] J.J. Zhang, Z.H. Wang, and L.M. Zhao. "Dynamic response of functionally graded cellular materials based on the Voronoi model. " Composite Part B, no. 85 (2016): 176–187.

[14] S.Q. Li, X. Li, Z.H. Wang, G.Y. Wu, G..X Lu, and L.M. Zhao. "Sandwich panels with layered graded aluminum honeycomb cores under blast loading. " Composite Structures, no. 173 (2017): 242–254.

[15] T.M. McCormack, R. Miller, O. Kesler, and L.J. Gibson. "Failure of sandwich beams with metallic foam cores. " International Journal of Solids Structures, no. 38 (2001): 4901–4920.

[16] J.L. Yu, E.H. Wang, J.R. Li and Z.J. Zheng. "Static and low-velocity impact behavior of sandwich beams with closed-cell aluminum-foam core in three-point bending." International Journal of Impact Engineering, no. 35 (2008): 885–894.

[17] V.L. Tagarielli, N.A. Fleck and V.S. Deshpande. "Collapse of clamped and simply supported composite sandwich beams in three-point bending." Composite Part B, no. 35 (2004): 523–534.

[18] V.L. Tagarielli, and N.A. Fleck. "A comparison of the structural response of clamped and simply supported sandwich beams with aluminum faces and a metal foam core. " Journal of Applied Physics A, no. 72 (2005): 408-417.

[19] F. Zhu, Z.H. Wang, G.X. Lu, and L.M. Zhao. "Analytical investigation and optimal design of sandwich panels subjected to shock loading." Material Design, no. 30 (2009): 91–100.

[20] L. Jing, Z.H. Wang and L.M. Zhao. "An approximate theoretical analysis for clamped cylindrical sandwich shells with metallic foam cores subjected to impulsive loading." Composite Part B, no. 60 (2014):150–157.

[21] R.W. Mao, G.X. Lu, Z.H. Wang, G.X. Lu, and L.M. Zhao. "Large deflection behavior of circular sandwich plates with metal foam-core. " European Journal Mechanics A/Solids, no. 55 (2016): 57–66.

[22] Z.H. Wang, L. Jing, J.G. Ning, and L.M. Zhao. "The structural response of clamped sandwich beams subjected to impact loading." Composite Structures, no. 93 (2011): 1300–1308.

[23] Q. Qin, and T.J. Wang. "An analytical solution for the large deflections of a slender sandwich beam with a metallic foam core under transverse loading by a flat punch." Composite Structures, no. 88 (2008): 509–518.

[24] F. Zhu, Z.H. Wang, G. Lu, and G. Nurick. "Some theoretical considerations on the dynamic response of sandwich structures under impulsive loading." International Journal of Impact Engineering, no. 37 (2010): 625–637.

[25] B. Castanié, J.J. Barrau, and J.P. Jaouen. "Theoretical and experimental analysis of asymmetric sandwich structures." Composite Structures, no. 55 (2002): 295–306.

[26] H. Hu, S. Belouettar, M. Potier-Ferry, E.M. Daya, and A. Makradi. "Multi-scale nonlinear modelling of sandwich structures using the Arlequin method." Composite Structures, no. 92 (2010): 515–522.

[27] H. Hu, S. Belouettar, M. Potier-Ferry, A. Makradi and Y. Koutsawa. "Assessment of various kinematic models for instability analysis of sandwich beams." Engineering Structures, no. 33 (2011): 572–579.

[28] H. Hu, S. Belouettar, M. Potier-Ferry and A. Makradi. "A novel finite element for global and local buckling analysis of sandwich beams." Composite Structures, no. 90 (2009): 270–278.

[29] H. Bart-Smith, J.W. Hutchinson, and A.G. Evans." Measurement and analysis of the structural performance of cellular metal sandwich construction. " International Journal of Mechanical Sciences, no. 43 (2001): 1945–1963.

[30] P.D. Soden. "Indentation of composite sandwich beams." Journal of Strain Analysis for Engineering Design, no. 31 (1996): 353–360.

[31] P.O. Bostrom. "Collapse modes of a rigid-plastic beam on a rigid-plastic foundation." International Journal of Mechanical Sciences, no. 17 (1975): 73– 84.

[32] R.E. Miller. "A continuum plasticity model for the constitutive and indentation behavior of foamed metals." International Journal of Mechanical Sciences, no. 42 (2000): 729–754.

[33] N. Jones. "Structural impact." 2nd ed. Cambridge: Cambridge University, (2011).

[34] T. Wierzbicki and M.S. Hoo Fatt. "Impact response of a string-on-plastic foundation." International Journal of Impact Engineering, no. 12 (1992): 21–36.

[35] V. Rubino, V.S. Deshpande and N.A. Fleck. "The three-point bending of Y-frame and corrugated core sandwich beams." International Journal of Mechanical Sciences, no. 52 (2010): 485–494.

[36] H. Hu, S. Belouettar, M. Potier-Ferry and E.M. Daya. "Review and assessment of various theories for modeling sandwich composites." Composites Structures, no. 84 (2008): 282–292.

[37] W.Q. Hao, J.M. Xie, F.H. Wang, Z.F. Liu and Z.H. Wang. "Analytical model of thin walled corrugated tubes with sinusoidal patterns under axial impacting." International Journal of Mechanical Sciences, no. 128 (2017): 1–16.

[38] W.Q. Hao, J.M. Xie and F.H. Wang. "Theoretical prediction of the progressive buckling and energy absorption of the sinusoidal corrugated tube subjected to axial crushing." Computer Structures, no. 191 (2017): 12–21.

[39] X. Qiu, V.S. Deshpande and N.A. Fleck. "Dynamic response of a clamped circular sandwich plate subject to shock loading." Journal of Applied Mechanics, no. 71 (2004): 637–645.

[40] Z.W. Zhou, Z.H. Wang, L.M. Zhao and X.F. Shu. "Loading rate effect on yield surface of aluminum alloy foams. " Material Science Engineering A, no. 543 (2012): 193–199.

[41] Z.W. Zhou, Z.H. Wang, L.M. Zhao and X.F. Shu. "Uniaxial and biaxial failure behaviors of aluminum alloy foams." Composite Part B, no. 61 (2014): 340–349.

[42] K. Yu, H. Hu, H. Tang, G. Giunta, M. Potier-Ferry and S. Belouettar. "A novel two dimensional finite elements to study the instability phenomena of sandwich plates." Computer Methods in Applied Mechanics and Engineering, no. 283 (2015): 1117–1137.

[43] Q. Huang, Y. Liu, H. Hu, Q. Shao, K. Yu and G. Giunta. "A Fourier-related double scale analysis on the instability phenomena of sandwich plates." Computer Methods in Applied Mechanics and Engineering, no. 318 (2017): 270–295.

[44] Y. Liu, K. Yu, H. Hu, S. Belouettar, M. Potier-Ferry and N. Damil. "A new Fourier related double scale analysis for instability phenomena in sandwich structures. " International Journal of Solids Structures, no. 49 (2012): 3077–3088.

[45] V.S. Deshpande and N.A. Fleck. "Isotropic constitutive models for metallic foams." Journal of the Mechanics and Physics of Solids, no. 48 (2000): 1253–1283.

[46] J.X. Zhang, Q.H. Qin, X.H. Han and W.L. Ai. "The initial plastic failure of fully clamped geometrical asymmetric metal foam core sandwich beams." Composite Part B, no. 87 (2016): 233–244.