تحلیل تئوری، آزمایشگاهی و عددی رفتار سازه‌های اتصال چسبی جدار نازک آلومینیوم -کامپوزیت تحت بارگذاری محوری

[1] H. Golivari, H. Saeidi Googarchin, A. Zaeri, and A. Keshavarzi. "Experimental and numerical investigation of the energy absorption in hybrid double-hat thin-walled structures reinforced by adhesive bonding under three-point bending." International Journal of Adhesion and Adhesives 128 (2024): 103543.

[2] G. Qin, L. Zheng, P. Mi, Y. Zhu, M. Li, J. Na, and Y. Wu Wang. "Influence of single or multi-factor coupling of temperature, humidity and load on the aging failure of adhesively bonded CFRP/aluminum alloy composite joints for automobile applications." International Journal of Adhesion and Adhesives 123 (2023): 103345.

[3] Y. Wei, X. Jin, Q. Luo, Q. Li, and G. Sun. "Adhesively bonded joints–a review on design, manufacturing, experiments, modeling and challenges." Composites Part B: Engineering (2024): 111225.

[4] L. Yu, X. Gu, L. Qian, P. Jiang, W. Wang, and M. Yu. "Application of tailor rolled blanks in optimum design of pure electric vehicle crashworthiness and lightweight." Thin-Walled Structures 161 (2021): 107410.

[5] L. Duan, G. Sun, J. Cui, T. Chen, A. Cheng, and G. Li. "Crashworthiness design of vehicle structure with tailor rolled blank." Structural and Multidisciplinary Optimization 53 (2016): 321-338.

[6] H. Golivari, H.S. Googarchin, A. Zaeri, and A. Keshavarzi.  "Experimental and numerical investigation of the energy absorption in hybrid double-hat thin-walled structures reinforced by adhesive bonding under three-point bending." International Journal of Adhesion and Adhesives 128 (2024): 103543.

[7] M. Ebrahimkhani, G. Liaghat, and H. Ahmadi. "Simulation of crushing performance of Composite Energy Absorber under impact loading using Continuum Damage Mechanics approach." Modares Mechanical Engineering 17, no. 12 (2018): 505-513. (in Persian)

[8] M. Damghani Nouri, H. Hatami, and A. Ghodsbin Jahromi. "Experimental Investigation of Expanded Metal Tube Absorber under Axial Impact Loading." Modares Mechanical Engineering 15, no. 1 (2015): 371-378. (in Persian)

[9] S.A. Mousavizadeh, M. Hosseini, and H. Hatami. "Experimental studies on energy absorption of curved steel sheets under impact loading and the effect of pendentive on the deformation of samples." Journal of Modeling in Engineering 18, no. 63 (2020): 27-40

[10] H. Sun, J. Wang, G. Shen, and P. Hu. "Energy absorption of aluminum alloy thin-walled tubes under axial impact." Journal of Mechanical Science and Technology  30, no. 7 (2016): 3105-3111.

[11] H.S. Googarchin, M. Pasandidehpoor, A. Mahmoodi, and M.H. Shojaeefard. "Energy absorption analysis for tapered multi-cell tubes improved by foams: theoretical development and numerical simulation." Composite Structures 207 (2019): 213-222.

[12] A. Alavi Nia, and H. Khodabakhsh. ''Numerical investigation of the effect of spacing in overlapping thin-walled tubes on their mechanical behavior and energy absorption.'' Journal of Modeling in Engineering 14, no. 45 (2016): 33-47. (in Persian)

[13] E. Zamani, and  M.Izadpanah. ''Numerical analysis of the collapse of polyurethane foam-filled composite tubes under compressive loading at different speeds.'' Journal of Modeling in Engineering 21, no. 74 (2023): 113-124. (in Persian)

[14] G. Zhu, G. Sun, Q. Liu and Q. Li. "On crushing characteristics of different configurations of metal-composites hybrid tubes." Composite Structures 175, (2017): 58-69.‏

[15] H. Hatami, and A.B. Fathollahi. "Theoretical and numerical study and comparison of the inertia effects on the collapse behavior of expanded metal tube absorber with single and double cell under impact loading." Amirkabir Journal of Mechanical Engineering 50, no. 5 (2018): 999-1014.

[16] M.R. Bambach, M. Elchalakani, and X.L. Zhao. "Composite steel–CFRP SHS tubes under axial impact." Composite Structures 87, no. 3 (2009): 282-292.

[17] Sh. Yong, Z. Wu,  and X. Hu. "Effect of reinforcement layer number on energy absorption of aluminum-CFRP hybrid square tubes under axial loading: Experimental and numerical study." Thin-Walled Structures 155, (2020), 106935.‏

[18]  E.H. Hanefi, and T. Wierzbicki. "Axial resistance and energy absorption of externally reinforced metal tubes." Composites Part B: Engineering 27, (1996): 387-394.

[19]  S.P. Santosa, T. Wierzbicki, A.G. Hanssen, and M. Langseth. "Experimental and numerical studies of foam-filled sections." International Journal of Impact Engineering 24, no. 5 (2000): 509-534.

[20] W.  Chen, and T. Wierzbicki. "Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption." Thin-Walled Structures 39, no. 4 (2001): 287-306.

[21]  A.A. Singace, H. Elsobky, and T.Y. Reddy. "On the eccentricity factor in the progressive crushing of tubes." Int. J. Solids Struct 32, (1995): 3589–3602.

[22]  ASTM, E8–99. "Standard test methods for tension testing of metallic materials." Annual book of ASTM standards. ASTM (2001).

[23] J. Bidadi, H.S. Saeidi Googarchin, A. Akhavan, R.J.C. Carbas, and L.F.M. Da Silva. "Characterization of Bending Strength in Similar and Dissimilar Carbon-Fiber-Reinforced Polymer/Aluminum Single-Lap Adhesive Joints." Applied Sciences 13, no. 23 (2023): 12879.

[24] M. Tayyebati, H. Ahmadi, and G. Liaghat. ''Experimental and numerical investigation of the collapse of hybrid metal-composite energy absorbers under quasi-static loading.'' Iranian Journal of Manufacturing Engineering 6, no. 8 (2020): 54-66.

[25] A. Turon, C.G. Davila, P.P. Camanho and J. Costa. "An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models." Engineering Fracture Mechanics 74, (2007): 1665–1682.

[26] M.R. Bambach. "Axial capacity and crushing behavior of metal-fiber square tubes - Steel, stainless steel and aluminum with CFRP." Composites Part B-Engineering 41, (2010): 550-559.

[27] S. Ataollahi, S.T. Taher, R. Eshkoor, A. Ariffin, and C. Azhari."Energy absorption and failure response of silk/epoxy composite square tubes: Experimental." Composites Part B-Engineering 43, (2012): 542-548.