پیوندهای مفید
آمار
| تعداد نشریات | 21 |
| تعداد شمارهها | 699 |
| تعداد مقالات | 10,095 |
| تعداد مشاهده مقاله | 71,299,704 |
| تعداد دریافت فایل اصل مقاله | 63,022,222 |
Mechanical Performance of Slag-Based HPFRGC with Varying Silica Fume Replacement and Fiber Types | ||
| Journal of Rehabilitation in Civil Engineering | ||
| مقاله 7، دوره 14، شماره 2 - شماره پیاپی 42، مرداد 2026 اصل مقاله (1.78 M) | ||
| نوع مقاله: Regular Paper | ||
| شناسه دیجیتال (DOI): 10.22075/jrce.2025.2318 | ||
| نویسندگان | ||
| Morteza Amooie* 1؛ Ali Sadrmomtazi2 | ||
| 1Ph.D. Candidate, Department of Civil Engineering, Guilan University, Rasht, Iran | ||
| 2Professor, Faculty of Civil Engineering, Guilan University, Rasht, Iran | ||
| تاریخ دریافت: 30 فروردین 1404، تاریخ بازنگری: 07 خرداد 1404، تاریخ پذیرش: 20 خرداد 1404 | ||
| چکیده | ||
| As Portland cement production greatly affects the environment, more focus is being placed on using geopolymer concrete (GPC) as an alternative. This study explores the mechanical performance of high-performance fiber-reinforced geopolymer concrete (HPFRGC) using slag-based binders partially replaced with silica fume at levels of 0%, 5%, 10%, and 15%. The effects of incorporating steel and glass fibers at 0.5% and 1% volume fractions on compressive and splitting tensile strengths were also evaluated at 7 and 28 days. Results indicate that 5–10% silica fume replacement enhances compressive and tensile strength, with 10% being optimal. Excessive replacement (15%) reduced strength due to dilution of reactive content. Steel fibers were more effective than glass fibers, particularly at 1% content, yielding up to 12.7% and 38.6% improvements in compressive and tensile strengths, respectively. Moderate benefits were seen from using glass fibers, mainly in tensile performance. Failure pattern analysis showed that fiber-free specimens experienced brittle fractures, while fiber-reinforced mixes exhibited improved crack control and ductility. Overall, the combined use of 10% silica fume and 1% steel fiber offers the best enhancement in mechanical performance, suggesting an effective approach for developing sustainable, high-performance geopolymer concretes. | ||
تازه های تحقیق | ||
| ||
| کلیدواژهها | ||
| Performance evaluation؛ High performance fiber reinforced geopolymer concrete؛ Slag؛ Silica fume | ||
| مراجع | ||
|
[1] Daneshvar K, Moradi MJ, Amooie M, Chen S, Mahdavi G, Hariri-Ardebili MA. Response of low-percentage FRC slabs under impact loading: Experimental, numerical, and soft computing methods. Structures 2020;27:975–88. https://doi.org/10.1016/J.ISTRUC.2020.06.005.
[2] Sabbaghian M, Kheyroddin A. Flexural strengthening of RC one way slabs with high-performance fiber-reinforced cementitious composite laminates using steel and GFRP bar. Eng Struct 2020;221:111106. https://doi.org/10.1016/J.ENGSTRUCT.2020.111106.
[3] Naderpour H, Rafiean AH, Fakharian P. Compressive strength prediction of environmentally friendly concrete using artificial neural networks. J Build Eng 2018;16:213–9. https://doi.org/10.1016/J.JOBE.2018.01.007.
[4] Zuaiter M, El-Hassan H, El-Maaddawy T, El-Ariss B. Properties of Slag-Fly Ash Blended Geopolymer Concrete Reinforced with Hybrid Glass Fibers. Build 2022, Vol 12, Page 1114 2022;12:1114. https://doi.org/10.3390/BUILDINGS12081114.
[5] Xiao R, Huang B, Zhou H, Ma Y, Jiang X. A state-of-the-art review of crushed urban waste glass used in OPC and AAMs (geopolymer): Progress and challenges. Clean Mater 2022;4:100083. https://doi.org/10.1016/J.CLEMA.2022.100083.
[6] Ahmed HU, Mohammed AA, Rafiq S, Mohammed AS, Mosavi A, Sor NH, et al. Compressive Strength of Sustainable Geopolymer Concrete Composites: A State-of-the-Art Review. Sustain 2021, Vol 13, Page 13502 2021;13:13502. https://doi.org/10.3390/SU132413502.
[7] Gökçe HS, Tuyan M, Nehdi ML. Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: A critical review. Constr Build Mater 2021;303:124483. https://doi.org/10.1016/J.CONBUILDMAT.2021.124483.
[8] Davidovits J. 30 Years of Successes and Failures in Geopolymer Applications. Market Trends and Potential Breakthroughs. . Proc. Geopolymer 2002 Conf., Melbourne, Australia: 2002.
[9] Nuaklong P, Sata V, Chindaprasirt P. Properties of metakaolin-high calcium fly ash geopolymer concrete containing recycled aggregate from crushed concrete specimens. Constr Build Mater 2018;161:365–73. https://doi.org/10.1016/J.CONBUILDMAT.2017.11.152.
[10] Pouhet R, Cyr M. Formulation and performance of flash metakaolin geopolymer concretes. Constr Build Mater 2016;120:150–60. https://doi.org/10.1016/J.CONBUILDMAT.2016.05.061.
[11] Jiang X, Xiao R, Zhang M, Hu W, Bai Y, Huang B. A laboratory investigation of steel to fly ash-based geopolymer paste bonding behavior after exposure to elevated temperatures. Constr Build Mater 2020;254:119267. https://doi.org/10.1016/J.CONBUILDMAT.2020.119267.
[12] Adak D, Sarkar M, Mandal S. Structural performance of nano-silica modified fly-ash based geopolymer concrete. Constr Build Mater 2017;135:430–9. https://doi.org/10.1016/J.CONBUILDMAT.2016.12.111.
[13] Huang G, Ji Y, Li J, Hou Z, Jin C. Use of slaked lime and Portland cement to improve the resistance of MSWI bottom ash-GBFS geopolymer concrete against carbonation. Constr Build Mater 2018;166:290–300. https://doi.org/10.1016/J.CONBUILDMAT.2018.01.089.
[14] Mehta A, Siddique R. Sustainable geopolymer concrete using ground granulated blast furnace slag and rice husk ash: Strength and permeability properties. J Clean Prod 2018;205:49–57. https://doi.org/10.1016/J.JCLEPRO.2018.08.313.
[15] Venkatesan RP, Pazhani KC. Strength and durability properties of geopolymer concrete made with Ground Granulated Blast Furnace Slag and Black Rice Husk Ash. KSCE J Civ Eng 2016;20:2384–91. https://doi.org/10.1007/S12205-015-0564-0/METRICS.
[16] Sadrmomtazi A, Ghasemi Khameneh N, Khoshkbijari RK, Amooie M. A STUDY ON THE DURABILITY OF THE SLAG-BASED GEOPOLYMER CONCRETES CONTAINING BINARY SOLID MIXTURES IN CORROSIVE ENVIRONMENTS. Rev Română Mater / Rom J Mater n.d.;2021:195–206.
[17] Mehdizadeh B, Vessalas K, Castel A, Mortazavi M. Investigation of carbonation behaviour on high volume GGBFS use in rigid road pavement concrete. Proc. 7th Concr. Pavements Conf. Aust. Soc. Concr. Pavements., 2023.
[18] Sabbaghian M, Kheyroddin A. The relationship between compressive strength and splitting tensile strength of high-performance fiber-reinforced cementitious composites. J Rehabil Civ Eng 2022. https://doi.org/10.22075/JRCE.2022.27187.1667.
[19] Hemalatha S, Rose AL. An experimental study on Glass fiber reinforced concrete. . Int Res J Eng Technol 2016;3:2285–9.
[20] Ali B, Qureshi LA, Raza A, Nawaz MA, Rehman SU, Rashid MU. Influence of Glass Fibers on Mechanical Properties of Concrete with Recycled Coarse Aggregates. Civ Eng J 2019;5:1007–19. https://doi.org/10.28991/CEJ-2019-03091307.
[21] Mirza FA, Soroushian P. Effects of alkali-resistant glass fiber reinforcement on crack and temperature resistance of lightweight concrete. Cem Concr Compos 2002;24:223–7. https://doi.org/10.1016/S0958-9465(01)00038-5.
[22] Medljy, J.; El-Hassan, H.; El-Maaddawy, T. Effect of Recycled Aggregate and Steel Fibers on the Mechanical Properties of Alkali-Activated Slag/Fly Ash Blended Concrete. ACI Symp. Publ. 2021, 349, 210–223. n.d.
[23] Nouri Y, Ghanizadeh AR, Safi Jahanshahi F, Fakharian P. Data-driven prediction of axial compression capacity of GFRP-reinforced concrete column using soft computing methods. J Build Eng 2025;101:111831. https://doi.org/10.1016/J.JOBE.2025.111831.
[24] Nouri Y, Ghanbari MA, Fakharian P. An integrated optimization and ANOVA approach for reinforcing concrete beams with glass fiber polymer. Decis Anal J 2024;11:100479. https://doi.org/10.1016/j.dajour.2024.100479.
[25] Mahmood AH, Foster SJ, Castel A. Effects of mixing duration on engineering properties of geopolymer concrete. Constr Build Mater 2021;303:124449. https://doi.org/10.1016/J.CONBUILDMAT.2021.124449.
[26] ASTM C143-15. Standard test method for slump of hydraulic-cement concrete. West Conshohocken, PA, USA: 2015.
[27] ASTM C31/C31M. Standard Test Practice for Making and Curing Concrete Test Specimens in the Field. West Conshohocken, PA, USA: 2021.
[28] British Standard Institution. BS EN 12390-3, Testing hardened concrete Compressive strength of test specimens 2019:24.
[29] ASTM C496/C496M − 17. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. 2011.
[30] Mohamed OA, Najm O, Zuaiter HA, Saleem SK, Ivak S, Al-Aribe K. Effect of activator concentration on setting time, workability and compressive strength of sustainable concrete with alkali-activated slag binder. Mater Today Proc 2024. https://doi.org/10.1016/J.MATPR.2024.04.103.
[31] Memon FA, Nuruddin MF, Shafiq N. Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete. Int J Miner Metall Mater 2013;20:205–13. https://doi.org/10.1007/S12613-013-0714-7/METRICS. | ||
|
آمار تعداد مشاهده مقاله: 575 تعداد دریافت فایل اصل مقاله: 301 |
||