محاسبه جریان و نیرومحرکه مغناطیسی میله‌های روتور در یک ماشین القایی قفس سنجابی

[1] K. Boughrara, N. Takorabet, R. Ibtiouen, O. Touhami, and F. Dubas, "Analytical analysis of cage rotor
induction motors in healthy, defective, and broken bars conditions", IEEE Transactions on Magnetics,
Vol. 51, NO. 2, February 2015, pp. 1 – 17.
[2] J. Delphin, Y. Lefèvre, F. Biais, M. Tunzini, and C. Henaux, "Analytical Calculation of Equivalent Circuit
Parameters Accounting for Deep Bar Effect in Multiple-Cage Squirrel Cage Rotor", InElectrical
Machines (ICEM), 2014 International Conference, September 2014, pp. 65 – 71.
[3] P. Zhang, J. R. Marti, and H. W. Dommel, "Induction Machine Modeling Based on Shifted Frequency
Analysis", IEEE Transactions on Power Systems, Vol. 24, NO. 1, February 2009, pp. 157 – 164.
[4] L. Pereira, D. Kosterev, P. Mackin, D. Davies, J. Undrill, and W. Zhu, "An Interim Dynamic Induction Motor
Model for Stability Studies in the WSCC", IEEE Transactions on Energy Conversion, Vol. 17, NO. 4,
November 2002, pp. 1108 – 1115.
[5] D. Foito, J. Maia, V. Fernão Pires, and J. F. Martins, "Double Three- phase Induction Machine Modeling for
Internal Fault Simulation", Electric Power Components and Systems, Vol. 43, NO. 14, August 2015, pp.
1610 – 1620.
[6] A. Wright, A. K. Wallace, and S. Carneiro, "A Mathematical Model of Three Phase Induction Machines",
Electric Machines & Power Systems, Vol. 1, NO. 3, January 1977, pp. 217 – 228.

[7] G. M. Joksimović, J. Riger, T. M. Wolbank, N. Perić, and M. Vašak, "Startor current spectrum signature of Healthy cage Rotor induction Machines", IEEE Transactions on Industrial Electronics, Vol. 60, NO. 9, September 2013, pp. 4025 – 4033.
[8] A. Gandhi, T. Corrigan, and L. Parsa, "Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors", IEEE Transactions on Industrial Electronics, Vol. 58, NO. 5, May 2011, pp. 1564 – 1575.
[9] S. M. A. Cruz, and A. J. Maroues, "Rotor cage fault Diagnosis in three-phase Induction Motors by Extended Parks Vector Approach", Electric Machines and Power System, Vol. 28, NO. 4, April 2000, pp. 289 – 299.
[10] N. Nait-asaid, M. S. Nait Said, and N. Bouguechal, "Rotor Resistance Estimation of an Induction Motor to Detect Broken Bars Fault Using H-H Method", Electric Power Components and Systems, Vol. 32, NO. 2, February 2004, pp. 149 – 161.
[11] H. Meshgin-Kelk, J. Milimonfared, and H. A. Toliyat, "A comprehensive Method for the Calculation of Inductance Coefficients of Cage Induction Machine", IEEE Transactions on Energy Conversation, Vol. 18, NO. 2, June 2003, pp. 187 – 193.
[12] X. Luo, Y. Luo, H. A. Toliyat, A. El-Antably, and T. A. Lipo, "Multiple Coupled Circuit Modeling of Induction Machines", IEEE Transaction on Industry Applications, Vol. 31, NO. 2, March 1995, pp. 311 –318.
[13] J. M. Gojko, D. D. Momir, and O. B. Aleksandar, "Skew and Linear Rise of MMF Across Slot Modeling-Winding Function Approach", IEEE Transaction on Energy Conversion, Vol. 14, NO. 3, September 1999, pp. 315 – 320.
[14] A. R. Munoz, and T. A. Lipo, "Complex Vector Model of the Squirrel Cage Induction Machine Including Instantaneous Rotor Bar currents", IEEE transactions on industry applications, Vol. 35, NO. 6, November 1999, pp. 1332 – 1340.
[15] M. Y. Babaa, and A. K. Boucherma, "Analytical Analysis of rotor slot harmonics in the line current of squirrel cage induction motors", Journal of Electrical Engineering, Vol. 57, NO. 1, 2006, pp. 12 – 19.
[16] G. Joksimovic, M. Djurovic, and J. Penman, "Cage Rotor MMF:Winding Function Approach", IEEE Power Engineering Review, Vol. 21, NO. 4, April 2001, pp. 64 – 66.