Study of Effect of Paste Volume, Water to Cementitious Materials and Fiber Dosages on Rheological Properties and In-Situ Strength of Self-Compacting Concrete

[1] Clans Pade, Lars Nyholm Thrane, Claus V. Nielsen, (2008) “Guidelines for mix design of SCC”, Danish Technological Institute.

[2] Bentur A., and Mindess S., (2007), Fiber ReinforcedCementitious Composites. 2th ed. Landonand New York, Taylor & Francis, Essex,UK , p.11-235.

[3] M. A. Issa, R.Z. Alrousan, (2008), “High performance bonded concrete overlays”, ICCBT.

[4] N. Banthia, R. Gupta, S. Mindess, (2006), “Development of fiber reinforced concrete repair materials”, Can. J. Civ. Eng., 33, 126-133

[5] Granju, J.L., (1996), Thin bonded overlays – About the role of fibre reinforcement on the limitation of their debonding, Advanced Cement Based Materials, 4, 21–27.

[6] Mailvaganam, N., Springfield, J., Repette, W. and Taylor, D., (2000), Curling of concrete slabs on grade, Construction Technology Update, 44, 1–6.

[7] Suprenant, B.A. and Malisch, R.W., (1999), Repairing curled slabs, Concrete Construction, 9, 58–65.

[8] Suprenant, B.A., (2002), A look at the curling mechanism and the effect of moisture and shrinkage gradients on the amount of curling, Concrete International, 24(3), 56–61.

[9] Tran, Q.T., Toumi, A. and Turatsinze, A., (2008), Thin bonded cement-based overlays: Numerical analysis of factors influencing their debonding under fatigue loading, Materials and Structures, 41(5), 951–967.

[10] Lupien, C., Chanvillard, G. Aïtcin, P-C. and Gagné, R., (1995), Réhabilitation d’une chaussée par resurfaçage mince adhérent en béton renforcé de fibres d’acier, in Proceedings of AIPCR, Comité C-7, Montréal, Canada, pp. 246–250.

[11] Lupien, C., Chanvillard, G. Aïtcin, P-C. and Gagné R., (1990), Réhabilitation d’une chaussée en bétonavec une chape mince en béton renforcé de fibres d’acier, in Les techniques de transport auservice de la qualité de vie,Exposé des communications du 25◦ congrès annuel de l’AQTR, Montréal, April, pp. 108-122.

[12] Chanvillard, G., Aitcin, P.C. and Lupien, C., (1990), Field evaluation of steel-fibre reinforced concreteoverlays with bonding mechanism, in Transportation Research Record 1226, TRB, Washington, pp. 48–56.

[13] Chanvillard, G. and Aitcin, P.C., (1990), Thin bonded overlays of fiber-reinforced concrete as a method of rehabilitation of concrete roads, Canadian Journal of Civil Engineering, 17(4), 521–527,.

[14] Farhat, H., (1999), Durabilité des réparations en béton de fibres: Effets du retrait et de la fatique, PhDThesis, Université Paul Sabatier, Toulouse, France, 178 pp., [in French].

[15] Granju, J.-L. and Chausson, H., (1995), Serviceability of fiber reinforced thin overlays relation between cracking and debonding, in ConChem, Proceedings of an International exhibition & Conference, Brussels, November, Verlag für chemische industrie, pp. 133–142.

[16] Granju, J.-L. and Chausson, H., (1996), Fiber reinforced thin bonded overlays: The mechanism of theirdebonding in relation with their cracking, in Concrete repair, rehabilitation and protection, inProceedings of an International Congress, Dundee, June, E. & FN. Spon, pp. 583–590.

[17] Chausson, H., (1997), Durabilité des rechargements minces en béton: Relation entre leur décollement, leur fissuration et leur renforcement par des fibres, PhD Thesis, Université Paul Sabatier,Toulouse, France, 198 pp., [in French].

[18] Turatsinze, A., Granju, J.L., Sabathier, V. and Farhat, H., (2005), Durability of bonded cement-basedoverlays: effect of metal fibre reinforcement, Materials and Structures, 38(277), 321–327.

[19] Zhang, J., Stang, H. and Li, V.C., (2001), Crack bridging model for fibre reinforced concrete under fatigue tension, International Journal of Fatigue, 23(8), 655–670.

[20] Rossi, P. (2002), (sous la direction de), Le développement industriel des bétons de fibres métalliques,conclusions et reconclusions, Presse de l’école nationale des Ponts et Chaussées.

[21] Silfwerbrand, J. and Paulsson, J., (1998), The Swedish experience: Better bonding of bridge deck overlays, Concrete International, 20(10), 56–61.

[22] Delatte, N.J., Williamson, M.S., and Fowler, D.W., (2000), Bond strength development of high-earlystrength bonded concrete overlays, ACI Materials Journal, 97-M27, 201–207.

[23] Silfwerbrand, J., (1987), Effects of differential shrinkage, creep, and properties of the contact surface on the strength of composite slabs of old and new concrete, Bulletin No. 147, Department of Structural Mechanics and Engineering, Royal Institute of Technology, Stockholm, 131 pp., [in Swedish].

[24] FIP Federation Internationale de la Précontrainte, Shear at the Interface of Precast and In-Situ Concrete, Technical Report, August 1978.

[25] Mikami, C, Wu, H-C, Elarbi, A, (2015), “ Effect of hot temperature on pull-off strength of FRP bonded concrete”, Construction anf Building Materials, Volume 91, p 180-186.

[26] Ghavidel, R, Madandoust, R, Ranjbar, M , (2015 ), “ Reliability of pull-off test for steel fiber reinforced self compacting concrete”, Science Direct.

[27] Sun. Z, Dillard, D, (2010), “ Three. Dimensional finite element analysis of fracture modes for the pull- off test of a thin film from a stiff substrate”, Science Direct, Volume 518, p 3837-3843.

[28] Sadowski, Lukasz, Hola, Jerzy, “ Neural Prediction of the Pull-Off Adhesion of Concrete Layers in Floors on the Basis of Nondestructive Test”, Procedia Engineering Volume 57, 2013, Pages 986-995.

[29] Naderi, Mahmood, Ghodousian, Oveys, “Adhesion of Self-Compacting Overlays Applied to Different Concrete Substrates and Its Prediction by Fuzzy Logic”, The Journal of Adhesion Volume 88, Issue 10, 2012.

[30] Sadowski, Lukasz, Hola, Jerzy, “ANN modeling of pull-off adhesion of concrete layers”, Advances in Engineering Software Volume 89, November 2015, Pages 17–27.

[31] Sadowski, Lukasz, “Non-destructive evaluation of the pull-off adhesion of concrete floor layers using rbf neural network”, Journal of Civil Engineering and Management Volume 19, Issue 4, 2013.

[32] EFNARC, (2005), “The European guidelines for Self-Compacting Concrete, specification, production and use”, http://www.Efnarc.Org