بررسی جریان سیال و انتقال حرارت جابجایی آزاد حفره مربعی با وجود مانع گرم مثلثی با روش المان محدود

[1] Gebhart B, Jaluria Y, Mahajan R L, Sammakia B (1988) Buoyancy induced flows and transport. Hemisphere.

[2] Bejan A (1995) Convection Heat Transfer. Second ed, Wiley & Sons.

[3] Mohebbi R, Rashidi M M. (2017) Numerical simulation of natural convection heat transfer of a nanofluid in an L-shaped enclosure with a heating obstacle[J]. Journal of the Taiwan Institute of Chemical Engineers, 72: 70-84.

[4] Kumar De A, Dalal A (2006) A numerical study of natural convection around a square, horizontal, heated cylinder placed in an enclosure. Int J Heat Mass Trans 49: 4608–4623.

[5] Izadi M, Mohebbi R, Karimi D, Sheremet M A. (2018) Numerical simulation of natural convection heat transfer inside a ┴ shaped cavity filled by a MWCNT-Fe ⁠3 O ⁠4 /water hybrid nanofluids using LBM, Chemical Engineering & Processing: Process Intensification, DOI:10.1016/j.cep.2018.01.004

[6] Ostrach S (1988) Natural convection in enclosures. J Heat Trans 110: 1175–1190.

[7] Frederick R L (1989) Natural convection in an inclined square enclosure with a partition attached to its cold wall. Int J Heat Mass Trans 32: 87–94.

[8] House J M, Beckermann C, Smith T F (1990) Effect of a centered conducting body on natural convection heat transfer in an enclosure. Num Heat Trans  Part A 18: 213–225.

[9] Lee J R, Ha M Y (2005) A numerical study of natural convection in a horizontal enclosure with a conducting body. Int J Heat Mass Trans 48: 3308-3318.

[10] Bhave P, Narasimhan A, Rees D A S (2006) Natural convection heat transfer enhancement using adiabatic block: optimal block size and Prandtl number effect. Int J Heat Mass Trans 49: 3807–3818.

[11] Nada S A (2008), Experimental investigation of natural convection heat transfer in horizontal and inclined annular fluid layers. Heat Mass Trans  44: 929–936.

[12] Yang C S, Jeng D Z, Tang U H, Gau C (2009), Flowand heat transfer of natural convection in horizontal annulus with a heating element on inner cylinder. J Heat Trans 131: 082502.

[13] Butler C, Newport D,  Geron M (2013), Natural convection experiments on a heated horizontal cylinder in a differentially heated square cavity. Exp Therm Fluid Sci 44: 199–208.

[14] Abdallaoui M El, Hasnaoui M, Amahmid A (2015) Numerical simulation of natural convection between a decentered triangular heating cylinder and a square outer cylinder filled with a pure fluid or a nanofluid using the lattice Boltzmann method. Powder Tech 277: 193–205.

[15] A. Chamkha, M. Ismael, A. Kasaeipoor, T. Armaghani, (2016)  Entropy Generation and Natural Convection of CuO-Water Nanofluid in C-Shaped Cavity under Magnetic Field, Entropy 18 1-18.

[16] M.A.Ismael, T.Armaghani, A.J. Chamkha, (2016)Conjugate heat transfer and entropy generation in a cavity filled with a nanofluid-saturated porous media and heated by a triangular solid. J. Taiwan Institute of Chem. Eng., 59138-151.

[17] T. Armaghani, M. A. Ismael, A. J. Chamkha, (2017) Analysis of entropy generation and natural convection in an inclined partially porous layered cavity filled with a nanofluid, Canadian J Physics, 95238-252.

[18] A.J. Chamkha, A.M. Rashad, M.A. Mansour, T. Armaghani, M. Ghalambaz, (2017).Effects of heat sink and source and entropy generation on MHD mixed convection of a Cu-water nanofluid in a lid-driven square porous enclosure with partial slip, Physics of Fluids 29, 052001

[19] A.J. Chamkha, A.M. Rashad, T. Armaghani, M.A. Mansour, Effects of partial slip on entropy generation and MHD combined convection in a lid-driven porous enclosure saturated with a Cu–water nanofluid, Journal of Thermal Analysis and Calorimetry, accepted, DOI: 10.1007/s10973-017-6918-8.

[20] A.J. Chamkha, A.M. Rashad, T. Armaghani, M.A. Mansour, (2018) Entropy Generation and MHD Natural Convection of a Nanofluid in an Inclined Square Porous Cavity: Effects of a Heat Sink and Source Size and Location, Chinese J of Physics, 56193-211.

[21] Abbassi H, Turki S, Ben Nasrallah S (2001) Mixed convection in a plane channel with a built-in triangular prism. Numer Heat Transfer 39: 307–320.

[22] Chattopadhyay H (2007), Augmentation of heat transfer in a channel using a triangular prism. Int J Therm Sci 46: 501–550.

[23] Xu X, Sun G, Yu Z, Hu Y, Fan L, Cen K (2009) Numerical investigation of laminar natural convective heat transfer from a horizontal triangular cylinder to its concentric cylindrical enclosure. Int J Heat Mass Trans 52: 3176–3186.

[24] Farhadi M, Sedighi K, Korayem A M (2010) Effect of wall proximity on forced convection in a plane channel with a built-in triangular cylinder. Int J Therm Sci 49: 1010–1018.

[25] Alansary H, Zeitoun O, Ali M (2012) Numerical modeling of natural convection heat transfer around horizontal triangular cylinders. Numer Heat Trans Part A 61: 201–219.

[26] Saadedin S, Hemmat-Asafe M (2012) Heat transfer and properties of synthetic convection around hot obstacles inserted in sloped square cavity filled with nanofluid . Modeling in engineering.

[27] Fereydoun A, Abbasian-Arani A, Hemmat-Asafe M, Zare-Ghadi A (2013) Natural convection around hot cylinder inserted in square cavity filled with nanofluid with change of radius and location of cylinder . Modeling in engineering.

[28] El Abdallaoui M, Hasnaoui M, Amahmid A (2014) Lattice-Boltzmann modeling of natural convection between a square outer cylinder and an inner isosceles triangular heating body. Numer Heat Trans Part A 66: 1076–1096.

[29] Sheikholeslami M, Gorji-Bandpy M, Vajravelu K (2015) Lattice Boltzmann simulation of magnetohydrodynamic natural convection heat transfer of Al2O3–water nanofluid in a horizontal cylindrical enclosure with an inner triangular cylinder. Inte J  Heat Mass Trans 80: 16–25.

[30] Hoseini H, Mohaseli A (2016) Heat transfer in bubble kip gas-solid to solid particles inside it using dynamic of computational fluid. Modeling in engineering.

[31] Nazari M, Kayhani M H, Mohebbi R. (2013) Heat transfer enhancement in a channel partially filled with a porous block: lattice Boltzmann method[J]. International Journal of Modern Physics C, 24(09): 1350060.

 [32]  Nazari M, Mohebbi R, Kayhani M H. (2014) Power-law fluid flow and heat transfer in a channel with a built-in porous square cylinder: Lattice Boltzmann simulation[J]. Journal of non-Newtonian fluid mechanics, 204: 38-49.

 [33]  Mohebbi R, Nazari M, Kayhani M H. (2016) Comparative study of forced convection of a power-law fluid in a channel with a built-in square cylinder[J]. Journal of Applied Mechanics and Technical Physics, 57(1): 55-68.

[34]   Mohebbi R, Heidari H. (2017) Lattice Boltzmann simulation of fluid flow and heat transfer in a parallel-plate channel with transverse rectangular cavities[J]. International Journal of Modern Physics C, 28(03): 1750042.

[35]   Mohebbi R, Lakzayi H, Sidik N A C, et al. (2018) Lattice Boltzmann method based study of the heat transfer augmentation associated with Cu/water nanofluid in a channel with surface mounted blocks[J]. International Journal of Heat and Mass Transfer, 117: 425-435.

[36]   Mohebbi R, Rashidi M M, Izadi M, et al. (2018) Forced convection of nanofluids in an extended surfaces channel using lattice Boltzmann method[J]. International Journal of Heat and Mass Transfer, 117: 1291-1303.

[37] Jani S, Mahmoodi M, Amini M (2013) Natural convection at different Prandtl numbers in rectangular cavities with a fin on the cold wall. J Energy: Eng Manag 2: 58-69.