A Comparative Solution of Natural Convection in an Open Cavity using Different Boundary Conditions via Lattice Boltzmann Method | ||
| Journal of Heat and Mass Transfer Research | ||
| مقاله 4، دوره 3، شماره 2 - شماره پیاپی 6، بهمن 2016، صفحه 115-129 اصل مقاله (2.16 M) | ||
| نوع مقاله: Full Length Research Article | ||
| شناسه دیجیتال (DOI): 10.22075/jhmtr.2016.363 | ||
| نویسندگان | ||
| Mohsen Nazari* 1؛ MH Kayhani2 | ||
| 1Mechanical Engineering Dept., Shahrood university | ||
| 2University of Shahrood | ||
| چکیده | ||
| A Lattice Boltzmann method is applied to demonstrate the comparison results of simulating natural convection in an open end cavity using different hydrodynamic and thermal boundary conditions. The Prandtl number in the present simulation is 0.71, Rayleigh numbers are 104,105 and 106 and viscosities are selected 0.02 and 0.05. On-Grid bounce-back method with first-order accuracy and non-slip method with second-order accuracy are employed for implementation of hydrodynamic boundary conditions. Moreover, two different thermal boundary conditions (with first and second order of accuracy) are also presented for thermal modelling. The results showed that first and second order boundary conditions (thermal/hydrodynamic) are the same for a two-dimensional, single phase, convective heat transfer problem including geometry with straight walls. The obtained results for different hydrodynamic and thermal boundary conditions are useful for the researchers in the field of lattice Boltzmann method in order to implement accurate condition on the boundaries, in different physics. | ||
| کلیدواژهها | ||
| Lattice Boltzmann method؛ open cavity؛ hydrodynamic/Thermal boundary conditions؛ order of accuracy | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 3,099 تعداد دریافت فایل اصل مقاله: 1,547 |
||
| تعداد نشریات | 22 |
| تعداد شمارهها | 723 |
| تعداد مقالات | 10,397 |
| تعداد مشاهده مقاله | 72,878,406 |
| تعداد دریافت فایل اصل مقاله | 64,561,517 |