بررسی مقایسه‌ای تاثیر میراگرهای اصطکاکی-دورانی، ویسکوالاستیک، TADAS بر پاسخ لرزه ای سازه‌ها

1[ ارزیابی کاربرد مهاربندهای فولادی همگرا، واگرا و کمانش گریز « ، مرتضی رئیسی دهکردی، مرتضی علیزاده اسفیوخی و مهدی اقبالی
مجلة مدلسازی در مهندسی، سال چهاردهم، شماره ،» در بهسازی لرزهای قابهای خمشی فولادی 47 ، زمستان 1395 ، صفحه 95 - 114 .
قلعه نوی، کریمیپور و آزاد درمیان 107
مجله مدل سازی در مهندسی سال هفدهم، شماره 59 ، زمستان 1398
]2[ ،» بهبود رفتار لرزهای قابهای فولادی با تغییر تراز نوع سیستم مهاربندی در ارتفاع « ، سید علیرضا کابلی، محسن گرامی و عادل میرحاج
مجلة مدلسازی در مهندسی، سال هفتم، شماره 17 ، تابستان 1388 ، صفحه 41 - 53 .
]3[ مطالعه عددی کاربرد میراگر فلزی لوزی شکل در تقویت لرزهای قابهای فولادی « ، سیدمحمد زهرایی و هرمز امیرزاده شمس
مجلة مدلسازی در مهندسی، سال ششم، شماره ،» میانمرتبه 15 ، تابستان 1387 ، صفحه 9 - 19 .
[4] I.H. Mualla and B. Bellev, "Performance of Steel Frames with a New Friction Damper Device under Earthquake Excitation", Engineering Structures, 24, 2002, pp 365–371.
[5] J. Vaseghi Amiri and S. Jalali, “Performance of steel moment frame equipped with rotational friction damper”, steel and structure journal, In Persian, 2006, p. 5. DOI: 10.1007/s13296-017-1218-5. 8.
[6] S. Mirzabgheri and A.A. Aghakouchak, “investigation performance of rotational friction dampers in steel moment frame using by dynamic and nonlinear static analysis”, 6th National Civil Engineering Congress, In Persian, 2011.
[7] S. Mirzabagheri, M. Sanati, A.A. Aghakouchak and S.E. Khadem, "Experimental and numerical investigation of rotational friction dampers with multi units in steel frames subjected to lateral excitation", Archives of Civil and Mechanical Engineering, In Press, Corrected Proof, 2014.
[8] L.M. Moreschi and M.P. Singh, "Optimal seismic design with viscouse dampers using genetic algorithms", journal of Structural Engineering, 1999.
[9] T. Mousanejad and A. Porzainali, “Seismic controlling of high rise building using by semi active viscus damer”, 4th National Civil Engineering Congress, In Persian, 2008.
[10] M.S. Zareian, A.A. Hoseini and R. Mourshed, “investigation performance of reinforced concrete structures equipped with TADAS”, 8th National Civil Engineering Congress, In Persian, 2014.
[11] C.S. Tsai, C.S. Chen, B.J. Chen and W.S. Pong, "RADAS device technology for retrofitting damaged structures in 921 Chi-Chi earthquake", Proceedings of ASME, PVP, Seismic Engineering 2002, Vancouver, Vol. 1, 2002, pp. 221-228.
[12] M. Jalali, "Improvement of Seismic Behavior of Steel Braced Frames Using Ductile Knee Element", MSc Thesis, Facultu of Engineering, University of Tehran, Iran, 2006.
[13] M. Askari Norzanee, A. Keihani and H. Ziaalhagh, “Investigation of the effect of TADAS on the seismic response of steel moment frame”, 4th national congress of retrofitting and preserving sustainable buildings, 2012.
[14] M. Zareiean, A.A. Hoseini and R. Morshed, “Investigation of structures using by TADAS”, 8th National Civil Engineering Congress, In Persian, 2014.
[15] L.O. Nielsen and I. H. Mualla “A Friction Damping system low order Behavior and design” Rapport BY G.DTU R-030, ISSN 1601-2917, 2002, ISBN87.7877-090-4
[16] I.H. Mualla And B. Bellev, "Performance of Steel Frames with a New Friction Damper Device under Earthquake Excitation", Engineering Structures, 24, 2002, pp 365–371.
[17] A. Malhotra, D. Carson, P. Gopal, A. Braimah, G.D. Giovanni and R. Pall, “Friction dampers for seismic upgrade of St. Vincent hospital, Ottawa”, 13th World Conference on Earthquake Engineering, Vancouver, Canada. 2004.
[18] M.C. Constantinou and M.D. Symans, “Experimental and Analytical Investigation of Seismic Response of Structures with Supplemental Fluid Viscous Dampers”, Report NO. NCEER-92- 0032, National Center for Earthquake Engineering Research, Buffalo, New York, 1992.
[19] k.C. Tsai, H.W. Chen, C.P. Hong and Y.F. Su, ''Design of steel Triangular Plate Energy Absorbers for seismic-resistant construction" journal of Earthquake, spectra, Vol. 9, No.3, 1993.
[20] M. Ghalehnovi and M.A. Pordel, "the effect of TADAS in Reinforcing the intermediate steel moment frame", Master's Thesis, Ferdowsi university of Mashhad, In Persian, 2015.
[21] k. C. Tsai, H. W. Chen, C. P. Hong. and Y. F. Su. ''Design of steel Triangular Plate Energy Absorbers for seismic-resistant construction" journal of Earthquake, spectra, Vol. 9, No.3 ,1