ارزیابی میزان تولید گازهای آلاینده و گلخانه ای با استفاده از مخلوط بنزین-اتانول در موتورهای بنزینی

[1] International Energy Outlook 2040, 2013.
[2] S.A. Shahir, H.H. Masjuki, M.A. Kalam, A. Imran, A.M. Ashraful, "Experimental investigation on the behavior of a direct injection diesel engine fueled with Karanja methyl ester-biogas dual fuel at different injection timings", Renew Sustain Energy Rev, Vol. 48, No. 1, 2015, pp. 62–66.
[3] M. Balat, H. Balat, Progress in bioethanol processing Appl Energy, Vol. 86, 2009, pp. 2273–2284.
[4] A.C. Hansen, D.C. Kyritsis, C.F. Lee, Characteristics of biofuels and renewable fuel standards, John Wiley, New York, 2009.
[5] T. Eseji, N. Qureshi, H.P. Blaschek, “Production of acetone butanole ethanol (ABE) in a continuous flow bioreactor using degermed corn and clostridium", Process Biochemistry, Vol. 42, 2007, pp. 34–40.
[6] A.W. Bhutto, K. Harijan, K. Qureshi, A. Bazmi, A. Bahadori, "Perspectives for the production of ethanol from lignocellulosic feedstock e a case study", Journal of Cleaner Production, Vol. 95, 2015, pp. 184–189.
[7] N.F. Tehrani, J.S. Aznar, Y. Kiros, "Coffee extract residue for production of ethanol and activated carbons", Journal of Cleaner Production, Vol. 91, 2015, pp. 64–71.
[8] H. Karlsson, P. Borjesson, P.A. Hansson, S. Ahlgren, "Ethanol production in biorefineries using lignocellulosic feedstock e GHG performance, energy balance and implications of life cycle calculation methodology", Journal of Cleaner Production, Vol. 83, 2014, pp. 420–427.
[9] B. Neupane, A. Halog, R.J. Lilieholm, "Environmental sustainability of wood derived ethanol: a life cycle evaluation of resource intensity and emissions in Maine", Journal of Cleaner Production, Vol. 44, 2013, pp. 77–83.
[10] C.L.F. Cavalett, E. Ortega, "Integrated environmental assessment of biodiesel production from soybean in Brazil", Journal of Cleaner Production, Vol. 18, 2010, pp. 77–82.
[11] A.K. Agarwal, "Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines", Progress in Energy and Combustion Science, Vol. 33, No. 3, 2007, pp. 233–271.
[12] F.N. Alasfour, "Nox emission from a spark ignition engine using 30% isobutanol/ gasoline blend: Part 1e preheating inlet air", Applied Thermal Engineering, Vol. 18, 1998, pp. 245–251.
[13] H.S. Yucesu, T. Topgul, C. Cinar, M. Okur, "Effect of ethanol gasoline blends on engine performance and exhaust emissions in different compression ratios", Applied Thermal Engineering, Vol. 26, 2006, pp. 2272–2279.
[14] G. Najafi, B. Ghobadian, T. Tavakoli, D.R. Buttsworth, T.F. Yusaf, M. Faizollahnejad, "Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network", Applied Energy, Vol. 86, No. 5, 2009, pp. 630–639.
[15] M. Koç, Y. Sekmen, T. Topgul, HS. Yucesu, "The effects of ethanol unleaded gasoline blends on engine performance and exhaust emissions in a spark ignition engine", Renew Energy, Vol. 34, 2009, pp. 2101–2109.
262 ارزیابی میزان تولید گازهای آلاینده و گلخانهای با استفاده از مخلوط بنزین-اتانول در موتورهای بنزینی
مجله مدل سازی در مهندسی سال هفدهم، شماره 59 ، زمستان 1398
[16] C. Park, Y. Choi, C. Kim, O. Seungmook, G. Lim, Y. Moriyoshi, "Performance and exhaust emission characteristics of a spark ignition engine using ethanol and ethanol reformed gas", Fuel, Vol. 89, 2010, pp. 2118–2125.
[17] A. Elfasakhany, "Engine performance evaluation and pollutant emissions analysis using ternary bio-ethanol iso-butanol gasoline blends in gasoline engines", Journal of Cleaner Production, Vol. 4, 2014, pp. 608–614.
[18] M. Al-Hasan, "Effect of ethanol-unleaded gasoline blends on engine performance and exhaust emission", Energy Conversion and Management, Vol. 44, No. 9, 2003, pp. 1547–1561.
[19] C.W. Wua, R.H. Chen, J.Y. Pu, T.H. Lina, "The influence of air-fuel ratio on engine performance and pollutant emission of an SI engine using ethanol gasoline blended fuels", Atmospheric Environment, Vol. 38, No. 4, 2004, pp. 7093–7100.
[20] L.W. Jia, M.Q. Shen, J. Wang, M.Q. Lin, "Influence of ethanol-gasoline blended fuel on emission characteristics from a four-stroke motorcycle engine", Journal of Hazardous Materials, Vol. 123, Nos. 1–3, 2005, pp. 29–34.
]21[ ق. حیدری نژاد، ا.م. جدیدی، "شبیه سازی نحوه پخش آلودگی در پشت یک ساختمان با استفاده از یک روش RANS-LES ،"
مجله مدلسازی در مهندسی، سال پانزدهم، شماره 49 ، تابستان 1396 ، صفحه 17 - 27 .
]22[ غ. شفابخش، ف. شاه حسینی، "آنالیز حساسیت مصرف سوخت در حمل و نقل جاده ای نسبت به عوامل هندسی مسیر"، مجله
مدلسازی در مهندسی، سال سیزدهم، شماره 42 ، پاییز 1394 ، صفحه 53 - 64 .
]23[ ر. صباغ،ن. رهبر، "بررسی تأثیر شکل هندسی بر بیشینه دمای جداره ی نوک فلر و توزیع آلاینده های خروجی آن"، مجله مدلسازی
در مهندسی، سال سیزدهم، شماره 40 ، بهار 1394 ، صفحه 43 - 57 .
[24] Groundwater management review, 1990, 167.
[25] W. Liu, M. Morales, Comparison of ethanol and butanol as additives in soybean biodiesel using a constant volume combustion chamber, Agilent technologies Co. Ltd, Shanghai, 2008.
[26] Birbal Chawla, speciation of nitrogen compounds in gasoline and disel range process stream by capillary column gas chromatography with chemiluminescence detection, mobil technology company, paulsboro technical center, paulsboro, newjersy, 2000.
[27] B.M. Masum, H.H. Masjuki, M.A. Kalam, Rizwanul I.M. Fattah, S.M. Palash, M.J. "Abedin, Effect of ethanol–gasoline blend on NOx emission in SI engine", Renewable and Sustainable Energy Reviews, Vol 24, 2013, pp.209–222.
[28] Modeling petroleum processes with Aspen plus, MY-Tech Inc., 1999.
[29] F. Bahadori, Kh. Mirza, A.R. Behroozsarand, S. Rezvantalab, "Investigation of porosity effects in the emission of pollutants in porous burners", Journal of Chemical Technology and Metallurgy, Vol 50, 2015, pp. 171–178.