Heat Transfer Correlation for Two Phase Flow in a Mixing Tank

[1] Brucato, A., Ciofalo, M., Grisafi, F., and Micale, G., (1988), Numerical Prediction of Fow Fields in Baffled Stirred Vessels: a Comparison of Alternative Modelling Approaches, Chem. Eng. Sci., 53, 3653–3684.

[2] Mavros, P., (2001), Flow Visualization in Stirred Vessels a Review of Experimental Techniques, Trans IChemE, 79, Part A, 113– 127.

[3] Tsui, Y., Hu, Y., (2011), Flow characteristics in mixers agitated by helical ribbon blade impeller, Application of Computational Fluid Mechanics. 5, 416-429.

[4] Sanaie-Moghadam, M., Jahangiri, M., and Hormoszi, F., (2015), Determination of stationary region boundary in multiple reference frames method in a mixing system agitated by Helical Ribbon Impeller using CFD, Heat and Mass Transfer Research. J., 2, 31-37.

[5] Iranshahi, A., Heniche, M., Bertrand, F. and Tanguy, P. A., (2006), Numerical investigation of the mixing efficiency of the Ekato Paravisc impeller, Chem. Eng. Sci., 61(8), 2609-2617.

[6] Aubin, J., Naude, I., Xuereb, C., Bertrand, J., (2000), Blending of Newtonian and Shear‐ Thinning Fluids in a Tank Stirred with a Helical Screw Agitator, ChERD Trans. IChemE., 78, 1105‐1114.

[7] Aubin, J., Naude, I., Xuereb, C., (2006), Design of Multiple Impeller Stirred Tanks for the Mixing of Highly Viscous Fluids Using CFD, Chem. Eng. Sci., 61, 2913-2920.

[8] Letellier, B., Xuereb, C., Swaels, P., Hobbes, P., Bertrand, J., (2002), Scale-up in laminar and transient regimes of a multi-stage stirrer, a CFD approach, Chem. Eng. Sci., 57, 4617- 4632.

[9] Sanjuan-Galindo, R., Heniche, M., Ascanio, G., Tanguy, P.A., (2011), CFD investigation of new helical ribbon mixers bottom shapes to improve pumping, Asia-Pac. J. Chem. Eng., 6, 181–193.

[10] Ameur,H., Bouzit, M., Helmaoui, M., (2011), Numerical study of fluid and power consumption in a stirred vessel with a Scsbs 6SRGT impeller, Chem. Process Eng., 32, 351- 366. M. Jahangiri / JHMTR 7 (2020) 1-10 9

[11] Ameur, H., Bouzit, M., (2012), Agitation of Yield Stress Fluids by Two-Blade Impellers, Canadian J. Chem. Eng. Technol., 3, 93-99.

[12] Luo, J.Y., Issa R. I., Gosman, A.D., (1993), Prediction of impeller induced flows in mixing vessels using multiple frames of reference, Proceeding Institution Chem. Eng. 136, 549-556.

[13] Ng, K., Fentiman, N. J., Lee, K.C., and Yianneskis, M., (1998), Assessment of Sliding Mesh CFD Predictions and LDA Measurements of the Flow in a Tank Stirred by a Rushton Impeller, Trans. IChemE, 76, 737–747.

[14] Montante, G., Lee, K.C., Brucato, A., and Yianneskis, M., (2001), Numerical Simulations of the Dependency of Flow Pattern on Impeller Clearance in Stirred Vessels, Diffusion in a Particle, AIChE, 45 (56) 3751–3770.

[15] Pérez-Terrazas, J. E., Ibarra-Junquera, V. and Rosu, H. C., (2008), Cellular automata modeling of continuous stirred tank reactors, Korean. J. Chem. Eng., 25, 461.

[16] Um, B. H. and Hanley, T. R., (2008), A CFD model for predicting the flow patterns of viscous fluids in a bioreactor under various operating conditions, Korean. J, Chem. Eng., 25, 1094.

[17] Aubin, J. and Xuereb, C., (2006), Design of multiple impeller stirred tanks for the mixing of highly viscous fluids using CFD. Chem. Eng. Sci., 61, 2913-2920.

[18] Jahangiri, M., (2007), Velocity distribution of helical ribbon impeller in mixing of polymeric liquids in the transition region, Iranian Polymer.,16, 731-739.

[19] Jahangiri,M., (2006), Fluctuation velocity for non-Newtonian liquid in mixing tank by Rushton turbine in the transition region, Iranian Polymer J., 15(4) 285-290.

[20] Jahangiri, M., (2008), Shear Rates in Mixing of Viscoelastic Fluids by Helical Ribbon Impeller, Iranian Polymer J., 17(11)831-841.

[21] Jahangiri, M., (2005), An LDA Study of the Rushton Turbine Velocity Profile for Mixing of Polymeric Liquids, Iranian Polymer J., 14(6)521-530.

[22] Aminian, A. Jahangiri, M., (2014), Predicting the Velocity Distribution of Rushton Turbine Impeller in Mixing of Polymeric Liquids Using Fuzzy Neural Network Model, Korean J. Chem. Eng., 31(5) 772-779.

[23] Liu, Li., (2014), Computational fluid dynamics modelling of complex fluid flow in stirred vessels, Ph.D. thesis, University of Birmingham.

[24] Rosa V. S., Júnior, D. M. (2019), Review Heat Transfer of Non-Newtonian Fluids in Agitated Tanks, Heat and Mass Transfer, Advances in Science and Technology Applications, DOI: http://dx.doi.org/10.5772/intechopen.8525 4

[25] Coyle C. K., Hirschland, H. E., Michel, B.J., Oldshue J.Y. (1970), Heat transfer to jackets with close clearance impellers in viscous liquids, Can. J. Chem. Eng.., 48, 275-278.

[26] Harriott P., (1959), Heat transfer in scrapedsurface exchangers. Chem. Engng. Prog., 54, 137-139.

[27] Latinen A. G., (1959), Correlation of scraped film heat transfer in the Votator, Chem. Engng Sci. 9(4) 263-266.

[28] Rautenbach R. and Bollenrath F. M., (1979), Fluid Mechanics and Heat Transfer With NoNewtonian Liquids in Mechanically Agitated Vessels, German chem. Engng , 2 18-24.

[29] Chilton H. and Drew B., (1944), Heat transfer coefficients in agitated vessels, Int. Engng Chem. 36 510-516.

[30] Kapustin A. S., (1963), Investigations of heat exchange in agitated vessels working, Int. Chem. Engng, 4, 514.

[31] Seider, E.N., Tate, G.E., (1936), Heat transfer and pressure drop of liquid in tubes, Ind. Eng. Chem. 28 1429–1434.

[32] Negata, S., Nishikawa, M. and Kayama, T., (1972), Heat transfer to vessel with impeller for highly viscous fluids, J. Chem. Eng. Jap. 5 83-85.

[33] Ayazi S., P., Edwards, M. F., (1986), Heat transfer to viscous Newtonian and nonNewtonian fluids for helical ribbon mixers, Chem. Eng. Sci, 41(8) 1957-1967.

[34] Lillo G., Mastrullo R., Mauro A.W., Viscito L., (2019), Flow boiling of R32 in a horizontal stainless steel tube with 6.00 mm ID. Experiments, assessment of correlations and comparison with refrigerant R410A, Inter. J. Refrigeration 97,143-156.

[35] Mitzushina, T. R., Kagaku K. (1970), Heat transfer under solidification of liquid on agitated vessel wall, J Chem., Eng. Jap, 34 1205.

[36] Mitsuishi, N. and Miyairi Y., (1973), Heat transfer to non-Newtonian fluids in an agitated vessel, J. Chem. Eng. Jap. 6 415-420.

[37] Nishikawa, M. (1972), Heat transfer in agitated vessels with special types of impellers, J. Chem. Eng. Jap, 5 83.

[38] Uhl, V. W., (1955), Heat transfer to viscous materials in jacketed agitated kattles, Chem. Eng. Symp. 51 93-108.

[39] Adams L.W., (2009) "Experimental and computational study of non-Turbulent flow regimes and cavern formation of non- 10 M. Jahangiri / JHMTR 7 (2020) 1-10 Newtonian fluids in a stirred tank,' PhD thesis, Birmingham, B15 2TT.

[40] UhI, V. W. and Voznick H. P., (1960), Heat transfer in mechanically agitated gas-liquid systems, Chem. Eng. Prog. 56 72-77.

[41] Rahimi,M., Kakekhani, A., AbdulazizAlsairafi, A., (2010), Experimental and computational fluid dynamic (CFD) studies on mixing characteristics of a modified helical ribbon impeller, Korean J. Chem. Eng. 27 pp.1150- 1158.

[42] Ishibashi, K., Yamanaka A., Mitsuishi N., (1979), Heat transfer in agitated vessels with special types of impellers, J. Chem. Eng. Japan, 12(3)230-235.

[43] Hamidi, A.A and Postchi, A.A. (2002), determine the heat transfer coefficient of the three-phase mixture in the tank walls equipped with a mechanical stirrer with nonstandard blade, J. Technology Faculty of Tehran, 37(4) 347-358.

[44] Rai, C.L., Devotta, I., Rao, P.G., (2000), Heat transfer to viscous Newtonian and nonNewtonian fluids using helical ribbon agitator, Chem. Eng. J., 79 73-77.