پیوندهای مفید
آمار
| تعداد نشریات | 21 |
| تعداد شماره‌ها | 628 |
| تعداد مقالات | 9,179 |
| تعداد مشاهده مقاله | 67,527,501 |
| تعداد دریافت فایل اصل مقاله | 8,062,149 |
Seismic Retrofit of a Historical Building in Tehran University Museum Using FRP Technology and Steel Jacketing | ||
| Journal of Rehabilitation in Civil Engineering | ||
| مقاله 4، دوره 4، شماره 1 - شماره پیاپی 7، اردیبهشت 2016، صفحه 41-54 اصل مقاله (1.82 M) | ||
| نوع مقاله: Research Note | ||
| شناسه دیجیتال (DOI): 10.22075/jrce.2016.490 | ||
| نویسندگان | ||
| Omid Rezaeifar* 1؛ Adel Younesi2؛ Majid Gholhaki3 | ||
| 1Assistant Professor, Faculty of Civil Engineering, Semnan University, Semnan, Iran | ||
| 2M.Sc. Graduate of Structure Engineering, Faculty of Civil Eng., Semnan University, Iran | ||
| 3Associate Professor, Faculty of Civil Engineering, Semnan University, Semnan, Iran | ||
| تاریخ دریافت: 26 آبان 1394، تاریخ بازنگری: 25 آبان 1395، تاریخ پذیرش: 25 آبان 1395 | ||
| چکیده | ||
| In this paper evaluation of seismic capacity of a historical building is carried out. It had been used as a national library about 40 years ago. Also, before that, it had been constructed as a part of a Royal complex. This building has been constructed by traditional methods using bricks and mortars. The ceilings system of the structure consists of jack arches. Also, the roof of the building has been constructed with wood trusses. The building does not have any designed lateral bearing system. Lateral resistant of the building is due to masonry walls and due to the brittle and non-ductile performance of it. In secondary cycles of earthquake vibration, it will loose its stiffness and strengthening radically. Also, the building does not have any reliable about integrity. Load bearing systems are not reliable too. In this paper, the evaluation of the resistant capacity of the building is established, and the weak points of the system are distinguished. For some masonry columns some traditional method of steel jacketing is designed, and for increasing the reliability of the columns, FRP sheets are applied. In order to retrofits the walls, FRP sheets are installed on its surfaces; the externally bonded FRP sheets are strengthening the wall against in-plane and out of plane applied horizontal forces. The combination of the steel jacketing and externally bonded FRP sheets is prescribed to achieve an integrated system of the elements. | ||
| کلیدواژه‌ها | ||
| URM؛ Masonry؛ Retrofit؛ Historical building؛ FRP | ||
| مراجع | ||
|
[1] Krawinkler, H., Seneviratna, G.P.D.K. (1998), “Pros and Cons of A Pushover Analysis of Seismic Performance Evaluation.” Engineering Structures, Vol.120(4-6), pp.452-464. [2] Krawinkler, H., (1996), “A Few Concepts for Performance-Based Seismic Design.” 11th World Conference on Earthquake Engineering, 1133. [3] SEAOC (1995), “Vision2000, Performance-Based Seismic Engineering of Buildings”. Sacramento, California. [4] Applied Technology Council (2000), “Pre-standard and Commentary for the Seismic Rehabilitation of Building.” FEMA356. [5] Applied Technology Council (1997), “NEHRP Guidelines for the Seismic Rehabilitation of Building.” FEMA273, Redwood City, California. [6] IIEES (2006), “Iranian Guidelines for the Seismic Rehabilitation of Building.” Publication, No.360, Tehran, Iran. [7] Rezaifar, O., Yoonesi, A., Yousefi, S. H., Gholhaki, M. (2016). “Analytical study of concrete-filled effect on the seismic behavior of restrained beam-column steel joints.” Scientia Iranica. Transaction A, Civil Engineering, Vol. 23(2), pp. 475-485. [8] Rezaifar O., Younesi, A. (2016). “Finite element study the seismic behavior of connection to replace the continuity plates in (NFT/CFT) steel columns.” Steel and Composite Structures, Vol. 21(1), pp. 73-91. [9] Mander, J. B., Priestley, M. J. N., Park, R. (1988). “Theoretical Stress-Strain Model for Confined Concrete.” Journal of Structural Engineering, Vol. 114(8), pp. 1804-1826. [10]-Eunsoo Choi, Baik-Soon Cho, Sol, Lee (2015). “Seismic retrofit of circular RC columns through using tensioned GFRP wires winding.” Composites Part B, 83, pp. 216-225 [11] Eslami, A., Ronagh, HR. (2013). “Effect of FRP wrapping in seismic performance of RC buildings with and without special detailing-a case study.” Compos Part B, Vol. 45, pp.1265-74. [12] Fakharifar, M., Chen, G., Sneed, L., Dalvand A. (2015). “Seismic performance of postmainshock FRP/steel repaired RC bridge columns subjected to aftershocks.” Compos Part B, Vol. 72, pp. 183-98. [13] Choi, E., Nam, TH., Yoon, SJ., Cho, SK., Park, J. (2010). “Confining jackets for concrete cylinders using NiTiNb and NiTi shape memory alloy wires.” Phys Scr, T139. 014058:1-4. [14] Choi, E, Chung YS, Choi DH, DesRoches R. (2012). “Seismic protection of lap-spliced RC columns using SMA wire jackets.” Mag Concr Res, Vol. 64(3), pp. 239-252. [15] Choi, E., Chung, YS., Park J, Cho., BS. (2010). “Behavior of reinforced concrete columns confined by new steel-jacketing method.” ACI Struct J., Vol. 107(6), pp.654-62. [16] Choi, E., Chung, YS., Park, C., Kim, DJ. (2013). “Seismic performance of circular RC columns retrofitted with prefabricated steel wrapping jackets.” Mag Concr Res. Vol. 65(23), pp.1429-40. [17] Choi, E., Jeon, JS., Cho, BS., Park K. (2013). “External jacket of FRP wire for confining concrete and its advantages.” Eng Struct, Vol. 56, pp. 555-566. [18] Ghobarah, A., Biddah, A., Mahgoub, M. (1997). “Rehabilitation of Reinforced concrete column using corrugated steel jacketing.” J Earthq Eng, Vol. 1(4), pp. 651-73. [19] Li, YF., Hwang, JS., Chen, SH., Hsieh, YM. (2005). “A study of reinforced concrete bridge columns retrofitted by steel jackets.” J Chin Inst Engr, Vol. 28(2), pp. 328-339. [20] Lin, ML., Chen, PC., Tsai, KC., Yj, Yu., Liu, JG. (2010). “Seismic steel jacketing of rectangular RC bridge columns for the mitigation of lap-splice failures.” Earthq Eng Struct Dyn, Vol. 39(15), pp.1687-1710. [21] Micelli, F., Modarelli, R. (2013). “Experimental and analytical study on properties affecting the behavior of FRP-confined concrete.” Compos PartB, Vol. 45, pp.1420-1431. [22] Bousias, S., Spathis, AL., Fardis, MN. (2007). “Seismic retrofitting of columns with lap spliced smooth bars through FRP or concrete jackets.” J Earthq Eng, Vol. 11, pp. 653-674. [23] Chastre, C., Silva, MAG. (2010). “Monotonic Axial behavior and modeling of RC circular columns confined with CFRP.” Eng Struct, Vol. 32(8), pp. 2268-77. [24] Applied Technology Council (ATC) “Seismic Evaluation and Retrofit of Concrete Buildings.” ATC40. Redwood City, California [25] IIEES (2006). “Commentary of Iranian Guidelines for the Seismic Rehabilitation of Building.” publication No.360, Tehran, Iran. [26] BHRC (2004). “Design Code for earthquake design.” Publication no-2800, third- edition. [27] Daneshjo, F., et al. (2001). “application of pushover analysis to obtain seismic behavior of structures.” first conference on buildings safety, Tehran, Iran. [28] Priestley, M. J. N., (). “Performance-Based Seismic Design.” Paper No.2831, 12th World Conference on Earthquake Engineering. | ||
|
آمار تعداد مشاهده مقاله: 1,217 تعداد دریافت فایل اصل مقاله: 1,910 |
||