Bilema, Munder, Yusri Aman, Mohamad, Abdul Hassan, Norhidayah, Al-Saffar, Zaid, Rogo, Kabiru, Azila Abdullah, Nor Farah. (1400). Influence of Crumb Rubber Incorporated with Different Warm Mix Asphalt Additives on the Mechanical Performance of WMA Mixture. هنرهای کاربردی, 9(4), 1-11. doi: 10.22075/jrce.2021.22347.1474
Munder Bilema; Mohamad Yusri Aman; Norhidayah Abdul Hassan; Zaid Al-Saffar; Kabiru Rogo; Nor Farah Azila Abdullah. "Influence of Crumb Rubber Incorporated with Different Warm Mix Asphalt Additives on the Mechanical Performance of WMA Mixture". هنرهای کاربردی, 9, 4, 1400, 1-11. doi: 10.22075/jrce.2021.22347.1474
Bilema, Munder, Yusri Aman, Mohamad, Abdul Hassan, Norhidayah, Al-Saffar, Zaid, Rogo, Kabiru, Azila Abdullah, Nor Farah. (1400). 'Influence of Crumb Rubber Incorporated with Different Warm Mix Asphalt Additives on the Mechanical Performance of WMA Mixture', هنرهای کاربردی, 9(4), pp. 1-11. doi: 10.22075/jrce.2021.22347.1474
Bilema, Munder, Yusri Aman, Mohamad, Abdul Hassan, Norhidayah, Al-Saffar, Zaid, Rogo, Kabiru, Azila Abdullah, Nor Farah. Influence of Crumb Rubber Incorporated with Different Warm Mix Asphalt Additives on the Mechanical Performance of WMA Mixture. هنرهای کاربردی, 1400; 9(4): 1-11. doi: 10.22075/jrce.2021.22347.1474

Influence of Crumb Rubber Incorporated with Different Warm Mix Asphalt Additives on the Mechanical Performance of WMA Mixture

Journal of Rehabilitation in Civil Engineering
مقاله 9، دوره 9، شماره 4 - شماره پیاپی 24، زمستان 2021، صفحه 1-11    اصل مقاله (663.78 K)
نوع مقاله: Regular Paper
شناسه دیجیتال (DOI): 10.22075/jrce.2021.22347.1474
نویسندگان
Munder Bilema* 1، 2؛ Mohamad Yusri Aman2؛ Norhidayah Abdul Hassan3؛ Zaid Al-Saffar4؛ Kabiru Rogo5؛ Nor Farah Azila Abdullah2
1Department of Civil Engineering, Faculty of Engineering, Benghazi University, Benghazi, Libya
2Department of Highway and Traffic Engineering, Faculty of Civil Engineering and Environmental, University Tun Hussein Onn Malaysia, Johor, Malaysia
3Department of Geotechnics & Transportation, School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
4Building and Construction Eng., Technical College of Mosul, Northern Technical University, Mosul, Iraq
5Department of Civil Engineering Technology, School of Engineering Technology, Nuhu Bamalli Polytechnic Zaria, P.M.B 1061 Zaria, Kaduna state, Nigeria
چکیده
The compacting and mixing processes involving hot mix asphalt during asphalt production can lead to air pollution as a result of a high volatile organic compound. An alternative solution that can reduce greenhouse gas emissions is by using warm mix asphalt (WMA). A proper application of additives to the WMA can improve the asphalt mixture's strength, durability, and workability. In this study, a 60/70 grade asphalt binder was added with 5% of crumb rubber (CR) and three different WMA additives at the recommended dosages, namely Sasobit, Cecabase, and Rediset. The wet method was used to blend the additives with virgin asphalt binders. The mixing and compacting temperatures were set at 135°C and 125°C, respectively, to mix the asphalt mixture. Mechanical performance tests were performed to evaluate the impact of WAM additives with CR on asphalt mixture. Based on the results, all the modified asphalt mixtures showed a better mechanical performance than the virgin asphalt mixture in terms of indirect tensile strength, moisture resistance, permanent deformation, and stiffness. Among all the WMA additives, Sasobit with CR showed the most significant impact on the asphalt mixture's performance.
کلیدواژه‌ها
Warm mix asphalt (WMA)؛ Additives؛ Crumb rubber (CR)؛ Mechanical performance
مراجع
آمار
تعداد مشاهده مقاله: 1,805
تعداد دریافت فایل اصل مقاله: 730
دانشگاه سمنان
پیوندهای مفید
آمار
تعداد نشریات22
تعداد شماره‌ها718
تعداد مقالات10,319
تعداد مشاهده مقاله72,327,036
تعداد دریافت فایل اصل مقاله64,052,621