Yousefpor, Mardali, Tajally, Mohammad, Taherian, Zahra, Khoshandam, Behnam. (1400). A Comparison of Catalyst Behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming. هنرهای کاربردی, 8(1), 105-113. doi: 10.22075/jhmtr.2021.20684.1288
Mardali Yousefpor; Mohammad Tajally; Zahra Taherian; Behnam Khoshandam. "A Comparison of Catalyst Behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming". هنرهای کاربردی, 8, 1, 1400, 105-113. doi: 10.22075/jhmtr.2021.20684.1288
Yousefpor, Mardali, Tajally, Mohammad, Taherian, Zahra, Khoshandam, Behnam. (1400). 'A Comparison of Catalyst Behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming', هنرهای کاربردی, 8(1), pp. 105-113. doi: 10.22075/jhmtr.2021.20684.1288
Yousefpor, Mardali, Tajally, Mohammad, Taherian, Zahra, Khoshandam, Behnam. A Comparison of Catalyst Behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming. هنرهای کاربردی, 1400; 8(1): 105-113. doi: 10.22075/jhmtr.2021.20684.1288

A Comparison of Catalyst Behavior of Samaria Modified Ni Catalyst Supported on Mesoporous Silica and Carbon for Methane CO2 Reforming

Journal of Heat and Mass Transfer Research
دوره 8، شماره 1 - شماره پیاپی 15، مرداد 2021، صفحه 105-113    اصل مقاله (1.69 M)
نوع مقاله: Full Length Research Article
شناسه دیجیتال (DOI): 10.22075/jhmtr.2021.20684.1288
نویسندگان
Mardali Yousefpor* 1؛ Mohammad Tajally2؛ Zahra Taherian3؛ Behnam Khoshandam4
1Faculty of Material and Metallurgical Engineering, Semnan university, Semnan, Iran
2Faculty of Material and Metallurgical Engineering, Semnan University, Semnan, Iran
3Faculty of Material and Metallurgical Engineering, Semnan University, Semnan, Iran
4Faculty of Chemical, Petroleum and Gas Engineering, Semnan University, Semnan, Iran
چکیده
The Samaria-promoted of 10wt% Nickel-CMK-3 and 10wt% Nickel-SBA-15 were synthesized by the Samarium (3wt %) addition, and using the two-solvent impregnation technique. The N2 adsorption-desorption, field emission scanning electron microscopy, energy dispersive x-ray analysis, x-ray diffraction and the transmission electron microscopy analysis were used to characterize of the Samaria modified and unmodified catalysts. Furthermore, the catalyst performances were tested under the carbon dioxide reforming of methane. As a result, the x-ray diffraction and surface area investigation revealed that the addition of Samaria (Sm2O3) into the Nickel (Ni) catalysts/silica (SBA-15) and carbon (CMK-3) mesostructures decreased the particles size and surface area according to the TEM micrographs; however, mproved the catalysts activity and catalysts stability. The role of investigation of support in the dry reforming reaction indicated that the activity and catalysts stability of the Ni/CMK-3 catalysts were lower than the Ni/SBA-15 catalysts due to the agglomeration of Ni nanoparticles on the CMK-3 support, the sintering of Ni nanoparticles, the burning of the mesoporous carbon support in the higher temperatures and the blocking of Ni nanoparticles into the deposited carbon nanotubes (CNTs).
کلیدواژه‌ها
Carbon mesostructure؛ CO2 Reforming of CH4؛ Samaria؛ Nickel؛ silica mesostructure
مراجع
آمار
تعداد مشاهده مقاله: 950
تعداد دریافت فایل اصل مقاله: 631
دانشگاه سمنان
پیوندهای مفید
آمار
تعداد نشریات22
تعداد شماره‌ها723
تعداد مقالات10,394
تعداد مشاهده مقاله72,859,991
تعداد دریافت فایل اصل مقاله64,555,449