Multi-Parameter Analysis of Low-Capacity C I Engine Powered with Biodiesel from Various Feedstock using Diesel R K Software

[1]   U. Energy Information Administration, “IEO 2021 Narrative.” [Online]. Available: www.eia.gov.

[2]   Covert, T., Greenstone, M. and Knittel, C.R., 2016. Will we ever stop using fossil fuels?. Journal of Economic Perspectives, 30(1), pp.117-138. doi: 10.1257/jep.30.1.117.

[3]   Özener, O., Yüksek, L., Ergenç, A.T. and Özkan, M., 2014. Effects of soybean biodiesel on a DI diesel engine performance, emission and combustion characteristics. Fuel, 115, pp. 875-883. doi: 10.1016/j.fuel.2012.10.081.

[4]   Yoon, S.H. and Lee, C.S., 2011. Experimental investigation on the combustion and exhaust emission characteristics of biogas–biodiesel dual-fuel combustion in a CI engine. Fuel processing technology, 92(5), pp. 992-1000. doi: 10.1016/j.fuproc.2010.12.021.

[5]   Dubey, A., Prasad, R.S. and Singh, J.K., 2020. An analytical and economical assessment of the waste cooking oil based biodiesel using optimized conditions on the process variables. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp. 1-16. doi: 10.1080/15567036.2020.1839600.

[6]   A. K. T, M. Musthafa M, C. R, T. K. Kandavel, T. Mohan raj, and S. G, 2022. Performance characteristics of a variable compression ratio CI engine simulation using artificial neural network. Energy Sources, Part A Recover. Util. Environ. Eff., vol. 44, no. 1, pp. 1912–1922. doi: 10.1080/15567036.2019.1648595.

[7]   Olkiewicz, M., Torres, C.M., Jiménez, L., Font, J. and Bengoa, C., 2016. Scale-up and economic analysis of biodiesel production from municipal primary sewage sludge. Bioresource technology, 214, pp.122-131. doi: 10.1016/j.biortech.2016.04.098.

[8]   de Araújo, C.D.M., de Andrade, C.C., e Silva, E.D.S. and Dupas, F.A., 2013. Biodiesel production from used cooking oil: A review. Renewable and sustainable energy reviews, 27, pp. 445-452. doi: 10.1016/j.rser.2013.06.014.

[9]   Jayaraman, J., Alagu, K., Venu, H., Appavu, P., Joy, N., Jayaram, P. and Mariadhas, A., 2023. Enzymatic production of rice bran biodiesel and testing of its diesel blends in a four-stroke CI engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(2), pp. 5340-5351. doi: 10.1080/15567036.2019.1671554.

[10] Chen, H., He, J., Chen, Y. and Hua, H., 2018. Performance of a common rail diesel engine using biodiesel of waste cooking oil and gasoline blend. Journal of the Energy Institute, 91(6), pp. 856-866. doi: 10.1016/j.joei.2017.10.003.

[11] Srinidhi, C., Jawale, M., Utikar, V., Jadhav, S., Acharya, M., Arakerimath, R., Hole, J.A. and Channapattana, S.V., 2022. A comparative performance and emission investigation CI engine fuelled with neem oil esters with varying engine compression ratios. Heat Transfer, 51(8), pp.7990-8004. doi: https://doi.org/10.1002/htj.22677.

[12] Atabani, A.E., Silitonga, A.S., Badruddin, I.A., Mahlia, T.M.I., Masjuki, H. and Mekhilef, S., 2012. A comprehensive review on biodiesel as an alternative energy resource and its characteristics. Renewable and sustainable energy reviews, 16(4), pp. 2070-2093. doi: 10.1016/j.rser.2012.01.003.

[13] Naik, S.N., Goud, V.V., Rout, P.K. and Dalai, A.K., 2010. Production of first and second generation biofuels: a comprehensive review. Renewable and sustainable energy reviews, 14(2), pp. 578-597. doi: 10.1016/j.rser.2009.10.003.

[14] Trabelsi, A.B.H., Zaafouri, K., Baghdadi, W., Naoui, S. and Ouerghi, A., 2018. Second generation biofuels production from waste cooking oil via pyrolysis process. Renewable energy, 126, pp. 888-896. doi: 10.1016/j.renene.2018.04.002.

[15] Nautiyal, P., Subramanian, K.A. and Dastidar, M.G., 2014. Production and characterization of biodiesel from algae. Fuel Processing Technology, 120, pp. 79-88. doi: 10.1016/j.fuproc.2013.12.003.

[16] Patel, N., Bambhania, M. P., Kachhadiya, P. R. and Patel, N. K., 2019. Design and development of small scale Biodiesel production unit. International Journal of Fluid and Thermal Engineering Design and development of small scale biodiesel production unit, vol. 4, no. July, 2019, [Online]. Available: https://www.researchgate.net/publication/337945379.

[17] Gavhane, R.S., Kate, A.M., Pawar, A., Soudagar, M.E.M. and Fayaz, H., 2020. Effect of soybean biodiesel and copper coated zinc oxide nanoparticles on enhancement of diesel engine characteristics. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp.1-19. doi: 10.1080/15567036.2020.1856237.

[18] Chatur, M.G., Maheshwari, A. and Campli, S., 2023. Investigation of waste cooking oil–diesel blend with copper oxide additives as fuel for diesel engine under variations in compression ratio. International Journal of Energy and Environmental Engineering, 14(4), pp.791-802. doi: 10.1007/s40095-022-00549-7.

[19] Srinidhi, C., Kshirsagar, P., Joshi, M., Kulkarni, A., Channapattana, S.V., Madhusudan, A., Aithal, K. and Gawali, S., 2022. Effect of fuel injection timing on CI engine fuelled with neem biodiesel blends–a comparative study of experimental and numerical simulation. International Journal of Energy and Environmental Engineering, 13, pp. 395-406. doi: 10.1007/s40095-021-00429-6.

[20] Channapattana, S.V., Campli, S., Madhusudhan, A., Notla, S., Arkerimath, R. and Tripathi, M.K., 2023. Energy analysis of DI-CI engine with nickel oxide nanoparticle added azadirachta indica biofuel at different static injection timing based on exergy. Energy, 267, p.126622. doi: https://doi.org/10.1016/j.energy.2023.126622.

[21] Mishra, V.K. and Goswami, R., 2018. A review of production, properties and advantages of biodiesel. Biofuels, 9(2), pp.273-289. doi: 10.1080/17597269.2017.1336350.

[22] Mirhashemi, F.S. and Sadrnia, H., 2020. NOX emissions of compression ignition engines fueled with various biodiesel blends: A review. Journal of the Energy Institute, 93(1), pp. 129-151. doi: 10.1016/j.joei.2019.04.003.

[23] Gautam, A. and Agarwal, A.K., 2015. Determination of important biodiesel properties based on fuel temperature correlations for application in a locomotive engine. Fuel, 142, pp.289-302.doi: 10.1016/j.fuel.2014.10.032.

[24] Patel, N.K. and Shah, S.N., 2015. Biodiesel from plant oils. In Food, energy, and water (pp. 277-307). Elsevier.

[25] Salaheldeen, M., Aroua, M.K., Mariod, A.A., Cheng, S.F., Abdelrahman, M.A. and Atabani, A.E., 2015. Physicochemical characterization and thermal behavior of biodiesel and biodiesel–diesel blends derived from crude Moringa peregrina seed oil. Energy Conversion and Management, 92, pp.535-542. doi: 10.1016/j.enconman.2014.12.087.

[26] Godiño, J.A.V., Aguilar, F.J.J.E. and García, M.T., 2018. Simulation of HCCI combustion in air-cooled off-road engines fuelled with diesel and biodiesel. Journal of the Energy Institute, 91(4), pp.549-562. doi: 10.1016/j.joei.2017.04.002.

[27] Pambudi, N.A., Laukkanen, T., Syamsiro, M. and Gandidi, I.M., 2017. Simulation of Jatropha curcas shell in gasifier for synthesis gas and hydrogen production. Journal of the Energy Institute, 90(5), pp.672-679. doi: 10.1016/j.joei.2016.07.010.

[28] Shen, J., Li, F., Li, Z., Wang, H., Shen, Y. and Liu, Z., 2019. Numerical investigation of air-staged combustion to reduce NOX emissions from biodiesel combustion in industrial furnaces. Journal of the Energy Institute, 92(3), pp. 704-716. doi: 10.1016/j.joei.2018.03.002.

[29] Bhikuning, A., 2021. The simulation of performance and emissions from rapeseed and soybean methyl ester in different injection pressures. Automotive Experiences, 4(3), pp.112-118. doi: 10.31603/ae.4682.

[30] Rajak, U., Nashine, P., Verma, T.N. and Pugazhendhi, A., 2019. Performance, combustion and emission analysis of microalgae Spirulina in a common rail direct injection diesel engine. Fuel, 255, p.115855. doi: 10.1016/j.fuel.2019.115855.

[31] Datta, A. and Mandal, B.K., 2017. Engine performance, combustion and emission characteristics of a compression ignition engine operating on different biodiesel-alcohol blends. Energy, 125, pp.470-483. doi: 10.1016/j.energy.2017.02.110.

[32] Nalgundwar, A., Paul, B. and Sharma, S.K., 2016. Comparison of performance and emissions characteristics of DI CI engine fueled with dual biodiesel blends of palm and jatropha. Fuel, 173, pp. 172-179. doi: 10.1016/j.fuel.2016.01.022.

[33] Kumbhar, V.S., Pandey, A., Varghese, A. and Patil, V., 2021. Comparative assessment of performance, combustion, and emission of compression ignition engine fuelled with different generations of biodiesel. International Journal of Sustainable Engineering, 14(6), pp.2082-2096. doi: 10.1080/19397038.2021.1943043.

[34] Pan, M., Wang, Y., Qian, W., Wu, C., Huang, H., Li, H. and Zhou, X., 2021. Experimental and numerical study on flow, combustion and emission characteristics of CI engine fueled with n-butanol/diesel blends under post-injection strategy. Fuel, 292, p.120267. doi: 10.1016/j.fuel.2021.120267.

[35] Bambhania, M.P. and Patel, N.K., 2023. Hydrodynamic cavitation in the fuel injector nozzle and its effect on spray characteristics: A Review. Journal of Heat and Mass Transfer Research, 10(1), pp.1-20. doi: 10.22075/jhmtr.2023.29165.1406.

[36] Alizadeh Kharkeshi, B., Shafaghat, R., Mohebi, M., Talesh Amiri, S. and Mehrabiyan, M., 2021. Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission. International Journal of Engineering, 34(11), pp. 2442-2451. doi: 10.5829/IJE.2021.34.11B.08.

[37] Al-Dawody, M.F. and Bhatti, S.K., 2011. Effect of soybean oil biofuel blending on the performance and emissions of Diesel engine using diesel-rk software. International journal of engineering science and technology, 3(6), pp.4539-4555.

[38] Gad, M.S., He, Z., El-Shafay, A.S. and EL-Seesy, A.I., 2021. Combustion characteristics of a diesel engine running with Mandarin essential oil-diesel mixtures and propanol additive under different exhaust gas recirculation: Experimental investigation and numerical simulation. Case Studies in Thermal Engineering, 26, p.101100. doi: 10.1016/j.csite.2021.101100.

[39] Kuleshov, A. and Mahkamov, K., 2008. Multi-zone diesel fuel spray combustion model for the simulation of a diesel engine running on biofuel. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222(3), pp.309-321. doi: 10.1243/09576509JPE530.

[40] Kuleshov, A.S., 2006. Use of multi-zone DI diesel spray combustion model for simulation and optimization of performance and emissions of engines with multiple injection (No. 2006-01-1385). SAE Technical Paper.

[41] Sonkar, S.K., Mishra, P. and Baredar, P.V., 2020. A Simulation Based Study on Diesel Engine Using Different Ecofriendly Biodiesel Blends of Cotton Seed Oil and Tallow Oil in Diesel-RK Software. Journal of Green Engineering, 10, pp.5350-5364.

[42] Scott, P.T., Pregelj, L., Chen, N., Hadler, J.S., Djordjevic, M.A. and Gresshoff, P.M., 2008. Pongamia pinnata: an untapped resource for the biofuels industry of the future. Bioenergy Research, 1, pp.2-11. doi: 10.1007/s12155-008-9003-0.

[43] Nguyen, T.A., Maeda, Y., Kuroda, K. and Otsuka, K., 2017. Inclusive impact assessment for the sustainability of vegetable oil-based biodiesel-Part II: Sustainability assessment of inedible vegetable oil-based biodiesel in Ha Long Bay, Vietnam. Journal of Cleaner Production, 168, pp.173-188. doi: 10.1016/j.jclepro.2017.08.238.

[44] Patel, N.K., Nagar, P.S. and Shah, S.N., 2013. Identification of non-edible seeds as potential feedstock for the production and application of bio-diesel. Energy and power, 3(4), pp.67-78. doi: 10.5923/j.ep.20130304.05.

[45] Ramadhas, A.S., Muraleedharan, C. and Jayaraj, S., 2005. Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil. Renewable energy, 30(12), pp.1789-1800. doi: 10.1016/j.renene.2005.01.009.

[46] Haas, M.J., McAloon, A.J., Yee, W.C. and Foglia, T.A., 2006. A process model to estimate biodiesel production costs. Bioresource technology, 97(4), pp.671-678. doi: 10.1016/j.biortech.2005.03.039.

[47] Shrivastava, P., Verma, T.N., Samuel, O.D. and Pugazhendhi, A., 2020. An experimental investigation on engine characteristics, cost and energy analysis of CI engine fuelled with Roselle, Karanja biodiesel and its blends. Fuel, 275, p.117891. doi: 10.1016/j.fuel.2020.117891.

[48] Seraç, M.R., Aydın, S., Yılmaz, A. and Şevik, S., 2020. Evaluation of comparative combustion, performance, and emission of soybean-based alternative biodiesel fuel blends in a CI engine. Renewable Energy, 148, pp.1065-1073. doi: 10.1016/j.renene.2019.10.090.

[49] Shrivastava, P., Verma, T.N. and Pugazhendhi, A., 2019. An experimental evaluation of engine performance and emisssion characteristics of CI engine operated with Roselle and Karanja biodiesel. Fuel, 254, p.115652. doi: 10.1016/j.fuel.2019.115652.

[50] Shrivastava, P. and Verma, T.N., 2020. Effect of fuel injection pressure on the characteristics of CI engine fuelled with biodiesel from Roselle oil. Fuel, 265, p.117005. doi: 10.1016/j.fuel.2019.117005.

[51] Atmanli, A. and Yilmaz, N., 2020. An experimental assessment on semi-low temperature combustion using waste oil biodiesel/C3-C5 alcohol blends in a diesel engine. Fuel, 260, p.116357. doi: 10.1016/j.fuel.2019.116357.

[52] Chen, H., He, J. and Hua, H., 2017. Investigation on combustion and emission performance of a common rail diesel engine fueled with diesel/biodiesel/ polyoxymethylene dimethyl ethers blends. Energy & Fuels, 31(11), pp.11710-11722. doi: 10.1021/acs.energyfuels.7b01898.

[53] Canakci, M. and Van Gerpen, J. H., 2001. The Performance and Emissions of a Diesel Engine Fueled with Biodiesel from Yellow Grease and Soybean Oil. In the 2001 ASAE Annual International Meeting Sponsored by ASAE Sacramento Convention Center.

[54] Barabas, I., Todoruţ, A. and Băldean, D., 2010. Performance and emission characteristics of an CI engine fueled with diesel–biodiesel–bioethanol blends. Fuel, 89(12), pp.3827-3832. doi: 10.1016/j.fuel.2010.07.011.

[55] Sharma, D.K. and Verma, T.N., 2020. Characteristics of fish oil biodiesel with the impact of diesel fuel addition on a CI engine. Journal of Computational & Applied Research in Mechanical Engineering (JCARME), 10(1), pp.245-256. doi: 10.22061/jcarme.2019.4737.1571.