ارزیابی آزمایشگاهی خواص دوام بتن قلیافعال بر پایه سرباره کوره آهن‏گدازی مصرفی در روسازی راه‌

 

Abdolahzade, S. and Nili, M. 2019. “The influence of compound layers on the mechanical properties and frost resistance of roller compacted concrete pavement”. Concrete Res., 2(3): 17-28. doi: 10.22124/jcr.2019.7811.1207

Amouzadeh Omrani, M., Tahmouresi, G. and Piri, P. 2023. “Experimental study of the effect of steel slag and reclaimed asphalt pavement (RAP) on the properties of self-compacting concrete (SCC) pavement”. Concrete Res., 16(4): 95-108. doi: 10.22124/jcr.2023.23289.1604

Banthia, N., Biparva, A. and Mindess, S. 2005. “Permeability of concrete under stress”. Cement Concrete Res., 35: 1651-1655.

Bozkurt, N. and Yazicioglu, S. 2010. “Strength and capillary water absorption of lightweight concrete under different curing conditions”. Indian J. Eng. Mater. Sci., 17(2)

Deb, P., Nath, P. and Sarker, P. 2015. “Drying shrinkage of slag blended fly ash geopolymer concrete cured at room temperature”. Proc. Eng., 125: 594-600.

Du, H., Du, S. and Liu, X. 2014. “Durability performances of concrete with nano-silica”. Constr. Build. Mater., 73: 705-712.

Duan, P., Shui, Z., Chen, W. and Shenb, C. 2013. “Enhancing microstructure and durability of concrete from ground granulated blast furnace slag and metakaolin as cement replacement materials”. J. Mater. Res. Technol., 2(1): 52-59.

Hashemipoor, K. and Mohammadizadeh, M. R. 2023. “Study on the mechanical properties of porous concrete with high permeability using aluminum slag”. Concrete Res., 16(1): 73-83. doi: 10.22124/jcr.2023.2 1607.1557

Elawady, E., El Hefnawy, A. A. and Ibrahim, R.A. F. 2014. “Comparative study on strength, permeability and sorptivity of concrete and their relation with concrete durability”. Int. J. Eng. Innov. Technol. (IJEIT), 4(4): 123-131.

Katebi, B., Aghaei Araei, A., Salamat, A. and Hashemi Tabatabaei, S. 2018. “Use of steel slag mixed by fly ash as stabilization of road subgrade”. Buil. Eng. Housing Sci., 12(1): 13-19. [In Persian]

Mansourghanaei, M. and Biklaryan, M. 2022. “Comparison of modulus-elasticity of pavement alkali-activated concrete and normal concrete under high temperature based on XRD and SEM test”. J. Transport. Infrastruct. Eng., 8(3): 137-150. doi: 10.22075/jtie.2022.25524.1577

Mansourghanaei, M., Biklaryan, M. and Mardookhpour, A. 2022a. “Experimental study of the effect of high temperature on the passage speed of Ultrasonic Pulse Velocity (UPV) in alkaline slag concrete used in pavement”. J. Transport. Infrastruct. Eng., 8(1): 119-131. doi: 10.22075/jtie.2022.25104.1572

Mansourghanaei, M., Biklaryan, M. and Mardookhpour, A. 2022b. “Experimental study of modulus of elasticity, capillary absorption of water and UPV in nature-friendly concrete based on geopolymer materials”. Int J. Adv. Struct. Eng., 12(2): 607-615.‏

Mansourghanaei, M. 2023a. “Investigating the mechanical and durability properties of geopolymer concrete based on granulated blast furnace slag as green concrete”. J. Civ. Eng. Res., 5(3): 24-34.‏

Mansourghanaei, M. 2023b. “Evaluation of mechanical properties and microstructure of pozzolanic geopolymer concrete reinforced with polymer fiber”. J. Civ. Eng. Res., 5(2): 1-13.‏

Mansourghanaei, M. and Mardookhpour, A. 2023. “Investigating the properties of environmentally friendly green concrete (Geopolymer) under high temperature”. Sustain. Earth Trends, 3(4): 62-69.‏

Mansourghanaei, M., Biklaryan, M. and Mardookhpour, A. 2023a. “Experimental study of properties of green concrete based on geopolymer materials under high temperature”. Civ. Eng Infrastruct. J., 56(2): 365-379.‏

Mansourghanaei, M., Biklaryan, M. and Mardookhpour, A. 2023b. “Experimental study of mechanical properties of slag geopolymer concrete under high temperature, used in road pavement”. Int. J. Transport. Eng., 11(1): 1371-1385.‏

Mansourghanaei, M. 2024. “Experimental evaluation of the impact resistance of alkali-activated slag concrete under high temperature”. J. Civ. Eng. Res., 6(3): 47-53.‏

Mansourghanaei, M. and Mardookhpour, A. 2024. “Analysis of the numerical results obtained from the experimental examination of the mechanical properties of geopolymer concrete”. Num. Meth. Civ. Eng., 9(1): 31-41.‏

Mansourghanaei, M., Biklaryan, M. and Mardookhpour, A. 2024a. “Durability and mechanical properties of granulated blast furnace slag based geopolymer concrete containing polyolefin fibers and nano silica”. KSCE J. Civ. Eng., 28(1): 209-219.‏

Mansourghanaei, M., Biklaryan, M. and Mardookhpour, A. 2024b. “Experimental study of the effects of adding silica nanoparticles on the durability of geopolymer concrete”. Austral. J. Civ. Eng., 22(1): 81-93.‏

Mehdipour, S., et al. 2020. “Mechanical properties, durability and environmental evaluation of rubberized concrete incorporating steel fiber and metakaolin at elevated temperatures”. J. Clean. Prod., 254: 120126.

Mehta, P. K. and Monteiro, P. J. M. 2014. “Concrete: Microstructure, Properties, and Materials”. McGraw-Hill Education.

Mirnezami, S., Hassani, A. and Bayat, A. 2024. “Evaluation of the effect of metallurgical aggregates (steel and copper slag) on mechanical properties of concrete in jointed plain concrete pavements (JPCP). J. Transport. Infrastruct. Eng., 10(3), 52-66. doi: 10.22075/jtie.2024.36172.1705

Mohammadi Janaki, A. and Hassani, A. 2019. “Durability of alkali-activated slag/silica fume (AASS) concrete pavement”. MCEJ, 19(4): 161-171. http://mcej.modares.ac.ir/article-16-24567-fa.html

Neupane, K., Des Chalmers and Kidd, P. 2018. “High-strength geopolymer concrete- properties, advantages and challenges”. Adv. Mater., 7(2): 15-25. doi: 10.11648/j.am.20180702.11

Nuaklong, P., Sata, V. and Chindaprasirt, P. 2016. “Influence of recycled aggregate on fly ash geopolymer concrete properties”. J. Clean. Prod., 112: 2300-2307.

Pachideh, G., Gholhaki, M. and Moshtagh, A. 2022. “The effect of adding different pozzolans on mechanical properties and water absorption of pervious concrete pavement”. J. Transport. Res., 19(3): 51-66. doi: 10.22034/tri.2022.68092

Pilehvar, S., DuyCao, V., Szczotok, A., Carmona, M., Valentini, L., Lanzón, M., . . and LenaKjøniksen, A. 2018. “Physical and mechanical properties of fly ash and slag geopolymer concrete containing different types of micro-encapsulated phase change materials”. Constr. Build. Mater., 173: 28-39.

Rezaei Lori, A. and Hassani, A. 2019. “Evaluation of the effect of copper slag on the improvement of the properties of pervious concrete”. J. Transport. Infrastruct. Eng., 4(4): 53-70. doi: 10.22075/jtie.2018.14580.1305

Ryu, G. S., et al. 2013. “The mechanical properties of fly ash-based geopolymer concrete with alkaline activators”. Constr. Build. Mater., 47: 409-418.

Siddique, R. and Kaur, D. 2012. “Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures”. J. Adv. Res., 3(1): 45-51.

Singh, B., et al. 2015. “Geopolymer concrete: A review of some recent developments”. Constr. Build. Mater., 85: 78-90.

Taheri, V., Naseri Yalghouzaghaj, M. and Mohammadi, N. 2023. “Evaluation of the effect of micro-silica gel, polymer fibers, fly ash and RAP on the performance and durability of concrete pavers”. J. Transport. Infrastruct. Eng., 9(4): 83-103. doi: 10.22075/jtie.2024.32473.1658

Yüksel, İ., Siddique, R. and Özkan, Ö. 2011. “Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement”. Constr. Build. Mater., 25(2): 967-972.

Zhuang, X.Y., et al. 2016. “Fly ash-based geopolymer: Clean production, properties and applications. J. Clean. Prod., 125: 253-267.