Extending The Life Cycle of Self-Healed Asphalt Pavements with Recycled Additives

Shafik, Catherine Gamil; Elshahat, Mohamed Rabah; Mahmoud, Ahmed Abdelghani; Mostafa, Abdelzaher Ezzeldeen Ahmed

doi:10.22075/jrce.2025.2287

اداره چاپ و انتشارات دانشگاه سمنان

تعداد نشریات	21
تعداد شماره‌ها	691
تعداد مقالات	10,035
تعداد مشاهده مقاله	71,039,515
تعداد دریافت فایل اصل مقاله	62,489,029

	Extending The Life Cycle of Self-Healed Asphalt Pavements with Recycled Additives
Journal of Rehabilitation in Civil Engineering
دوره 14، شماره 2 - شماره پیاپی 42، مرداد 2026 اصل مقاله (985.35 K)
نوع مقاله: Regular Paper
شناسه دیجیتال (DOI): 10.22075/jrce.2025.2287
نویسندگان
Catherine Gamil Shafik^* ¹؛ Mohamed Rabah Elshahat²؛ Ahmed Abdelghani Mahmoud³؛ Abdelzaher Ezzeldeen Ahmed Mostafa⁴
¹M.Sc., Department of Civil Engineering, Egyptian Russian University, Cairo, Egypt
²Assistant Professor, Department of Civil Engineering, Egyptian Russian University, Cairo, Egypt
³Assistant Professor, Department of Civil Engineering, Faculty of Engineering - Mataria, Helwan University, Cairo, Egypt
⁴Professor, Department of Civil Engineering, Faculty of Engineering - Mataria, Helwan University, Cairo, Egypt
تاریخ دریافت: 13 اسفند 1403، تاریخ بازنگری: 14 مرداد 1404، تاریخ پذیرش: 26 مرداد 1404
چکیده
Asphalt is the most used material for constructing road pavements worldwide. However, a major issue that affects asphalt pavement performance and service life is cracking, which is primarily caused by factors such as load and temperature. This paper aims to develop a sustainable asphalt road pavement through the self-healing technique using induction and microwave heating with additives such as electric arc furnace slag (EAFS) and steel wool fiber (SWF). Marshall Stability, Volumetric Properties, Indirect Tensile Strength, moisture resistance, low-temperature cracking resistance, and thermal distribution were studied. The healing index was utilized as an indicator for improving the self-healing of asphalt mixtures. The pavement life cycle was also predicted, and the construction cost was analyzed. The results showed that using EAFS or SWF in the asphalt mixture resulted in significant time and energy consumption. The replacement of natural coarse aggregate with 20% EAFS and/or the addition of 0.2% SWF by weight of the asphalt mixture showed promising results in improving mechanical properties, promoting sustainability, and increasing the pavement life cycle by a percentage up to 47%.
تازه های تحقیق
Development of sustainable asphalt pavements using self-healing techniques with induction and microwave heating. Incorporation of self-healing additives like electric arc furnace slag (EAFS) and steel wool fiber (SWF) to improve asphalt properties. Investigation of properties such as Self-Healing Index and low-temperature cracking resistance. Use of 20% EAFS or 0.2% SWF enhances mechanical properties, sustainability, and prolongs pavement life by up to 47%.
کلیدواژه‌ها
Sustainable Asphalt Pavement؛ Self-Healing؛ Induction and Microwave Heating؛ Asphalt Pavement Life Cycle؛ Maintenance and Repair Cost

مراجع
[1] Lou B, Sha A, Li Y, Wang W, Liu Z, Jiang W, et al. Effect of metallic-waste aggregates on microwave self-healing performances of asphalt mixtures. Constr Build Mater 2020;246:118510. https://doi.org/10.1016/j.conbuildmat.2020.118510. [2] Jwaida Z, Dulaimi A, Mydin MAO, Özkılıç YO, Jaya RP, Ameen A. The Use of Waste Polymers in Asphalt Mixtures: Bibliometric Analysis and Systematic Review. J Compos Sci 2023;7. https://doi.org/10.3390/jcs7100415. [3] Khan MA, Khan MS, Nasir B, Khan A, Sabri MMS, Ahmad M, et al. Performance optimization of asphalt pavements using binder film thickness as a criterion in innovative mix design compared to Marshall and Superpave methods. Front Mater 2024;11:1–18. https://doi.org/10.3389/fmats.2024.1488310. [4] Garcia A, Salih S, Gómez-meijide B. Optimum moment to heal cracks in asphalt roads by means electromagnetic induction. Constr Build Mater 2020;238:117627. https://doi.org/10.1016/j.conbuildmat.2019.117627. [5] Abdelghani Mahmoud A, Fouad M, E. A. Mostafa A. Evaluation of Self-Healing Performance of the Hot Mix Asphalt Using Metallic Wool and Recycled Materials. Eng Res J 2022;175:1–18. https://doi.org/10.21608/erj.2022.258131. [6] Salih SI. Self-Healing of cycle loadind damage in asphalt mixtures. The university of Nottingham, 2020. [7] Mostafa AEA, Ouf MS, Abdel Fatah HH. Evaluation of Using Waste Road Construction Materials with Additives in Warm Mix Asphalt. Sustain Civ Infrastructures 2018:322–34. https://doi.org/10.1007/978-3-319-61633-9_22. [8] Eloufy AM, Mostafa AEA, Ouf MS, Ibrahim MF. Evaluating the Performance of Half Warm Asphalt Mixtures Using Reclaimed Asphalt Pavement ( RAP ). PORT SAID Eng Res J 2022;62:56–63. https://doi.org/10.21608/PSERJ.2022.135558.1185. [9] Eloufy AM, Mostafa AEA, Ouf MS, Ibrahim MF. Investigating the Engineering Properties of Half-Warm Asphalt Mixes Using Chemical Additives. Egypt Int J Eng Sci Technol 2022;40:61–70. https://doi.org/10.21608/eijest.2022.125423.1141. [10] Nasser AM, Abd El-Wahab H, Abd El-Fattah M, Mostafa AEA, Sakr AG. Preparation and characterization of modified reclaimed asphalt by using styrene – Butyl acrylate nanoemulsioncopolymer. Egypt J Chem 2018;61:269–380. https://doi.org/10.21608/ejchem.2018.2956.1245. [11] Nasser AM, El-wahab HA, El-fattah MA, Mostafa AEA, Sakr G. Study on Modification of Reclaimed Asphalt Pavements By Using Some Acrylate Polymers. Al-Azhar Bull Sci 2017;28:31–41. https://doi.org/10.21608/absb.2017.8108. [12] Radeef HR, Abdul Hassan N, Mahmud MZH, Zainal Abidin AR, Ismail CR, Abbas HF, et al. Characterisation of cracking resistance in modified hot mix asphalt under repeated loading using digital image analysis. Theor Appl Fract Mech 2021;116:103130. https://doi.org/10.1016/j.tafmec.2021.103130. [13] Mirabdolazimi SM, Kargari AH, Pakenari MM. New achievement in moisture sensitivity of nano-silica modified asphalt mixture with a combined effect of bitumen type and traffic condition. Int J Pavement Res Technol 2021;14:105–15. https://doi.org/https://doi.org/10.1007/s42947-020-0043-y. [14] Mostafa AEA, Tawhed WMF, Elshahat MR, Sherif AG. Developing New Design Criteria of Asphalt Pavement Mix Using Nano-Materials and Polymer-Materials. Int J Adv Eng Nano Technol 2018:335–47. https://doi.org/10.1007/978-3-319-61633-9_23. [15] Naser AM, Abd El - Wahab H, Moustafa El Nady MAEF, E. A. Mostafa A, Lin L, Sakr AG. Preparation and characterisation of modified reclaimed asphalt using nanoemulsion acrylate terpolymer. Pigment Resin Technol 2019;48:363–74. https://doi.org/10.1108/PRT-08-2018-0080. [16] Afshin A, Behnood A. Nanomaterials in asphalt pavements: A state-of-the-art review. Clean Waste Syst 2025;10:100214. https://doi.org/10.1016/j.clwas.2025.100214. [17] Kumar H, Varma S. A review on utilization of steel slag in hot mix asphalt. Int J Pavement Res Technol 2021;14:232–42. https://doi.org/10.1007/s42947-020-0025-0. [18] Hassan HF, Al-Shamsi K, Al-Jabri K. Effect of Steel Slag on the Permanent Deformation and Life Cycle Cost of Asphalt Concrete Pavements. Int J Pavement Res Technol 2023. https://doi.org/10.1007/s42947-023-00314-x. [19] Zhang R, Zhang W, Shen S, Wu S, Zhang Y. Evaluation of the correlations between laboratory measured material properties with field cracking performance for asphalt pavement. Constr Build Mater 2021;301:124126. https://doi.org/10.1016/j.conbuildmat.2021.124126. [20] Liu J, Yang X, Lau S, Wang X, Luo S, Lee VC-S, et al. Automated pavement crack detection and segmentation based on two‐step convolutional. Comput Aided Civ Eng 2020. https://doi.org/10.1111/mice.12622. [21] Yamaç ÖE, Yilmaz M, Yalçın E, Kök BV, Norambuena-Contreras J, Garcia A. Self-healing of asphalt mastic using capsules containing waste oils. Constr Build Mater 2021;270. https://doi.org/10.1016/j.conbuildmat.2020.121417. [22] Sun X, Qin X, Liu Z, Yin Y, Zou C, Jiang S. New preparation method of bitumen samples for UV aging behavior investigation. Constr Build Mater 2020;233:117278. https://doi.org/10.1016/j.conbuildmat.2019.117278. [23] Zhang H, Chen Z, Xu G, Shi C. Evaluation of aging behaviors of asphalt binders through different rheological indices. Fuel 2018;221:78–88. https://doi.org/10.1016/j.fuel.2018.02.087. [24] Franesqui MA, Yepes J, García-González C. Top-down cracking self-healing of asphalt pavements with steel filler from industrial waste applying microwaves. Constr Build Mater 2017;149:612–20. https://doi.org/10.1016/j.conbuildmat.2017.05.161. [25] Behnia B, Reis H. Self-healing of thermal cracks in asphalt pavements. Constr Build Mater 2019;218:316–22. https://doi.org/10.1016/j.conbuildmat.2019.05.095. [26] Jwaida Z, Dulaimi A, Othuman A, Yasir M, Shakir NK, Busaltan A. The self ‑ healing performance of asphalt binder and mixtures : a state ‑ of ‑ the ‑ art review. Springer International Publishing; 2024. https://doi.org/10.1007/s41062-024-01547-w. [27] Grossegger D, Garcia A. Influence of the thermal expansion of bitumen on asphalt self-healing. Appl Therm Eng 2019;156:23–33. https://doi.org/10.1016/j.applthermaleng.2019.04.034. [28] Grossegger D, Gomez-Meijide B, Vansteenkiste S, Garcia A. Influence of rheological and physical bitumen properties on heat-induced self-healing of asphalt mastic beams. Constr Build Mater 2018;182:298–308. https://doi.org/10.1016/j.conbuildmat.2018.06.148. [29] Xu Z, Xu T. Improving Effects of Pretreated Graphene on Pavement Performance and Self-Healing Behaviors of Asphalt Mixture. Int J Pavement Res Technol 2023. https://doi.org/10.1007/s42947-023-00401-z. [30] Moharam O, Mostafa A. Improving life cycle of asphalt pavement mixture using Self-Healing Techiuqe. J Int Soc Sci Eng 2023;0:0–0. https://doi.org/10.21608/jisse.2023.209844.1074. [31] Ruiz-Riancho N, Garcia A, Grossegger D, Saadoon T, Hudson-Griffiths R. Properties of Ca-alginate capsules to maximise asphalt self-healing properties. Constr Build Mater 2021;284:122728. https://doi.org/10.1016/j.conbuildmat.2021.122728. [32] Norambuena-Contreras J, Garcia A. Self-healing of asphalt mixture by microwave and induction heating. Mater Des 2016;106:404–14. https://doi.org/10.1016/j.matdes.2016.05.095. [33] Jeoffroy E, Bouville F, Bueno M, Studart AR, Partl MN. Iron-based particles for the magnetically-triggered crack healing of bituminous materials. Constr Build Mater 2018;164:775–82. https://doi.org/10.1016/j.conbuildmat.2017.12.223. [34] Pérez I, Gómez-Meijide B, Pasandín AR, García A, Airey G. Enhancement of curing properties of cold in-place recycling asphalt mixtures by induction heating. Int J Pavement Eng 2019;22:355–68. https://doi.org/10.1080/10298436.2019.1609674. [35] Kargari A, Arabani M, Mirabdolazimi SM. Effect of palm oil capsules on the self-healing properties of aged and unaged asphalt mixtures gained by resting period and microwave heating. Constr Build Mater 2022;316:125901. https://doi.org/10.1016/j.conbuildmat.2021.125901. [36] Anupam BR, Sahoo UC, Chandrappa AK. A methodological review on self-healing asphalt pavements. Constr Build Mater 2022;321:126395. https://doi.org/10.1016/J.CONBUILDMAT.2022.126395. [37] Abbad El Andaloussi N, Zaoui A. Enhancing Mechanical and Self-Healing Properties of Asphalt Binder Through the Incorporation of Nano-silica. Int J Pavement Res Technol 2023;16:1–14. https://doi.org/10.1007/s42947-021-00105-2. [38] Fan S, Wang H, Zhu H, Sun W. Evaluation of Self-Healing Performance of Asphalt Concrete for Low-Temperature Fracture Using Semicircular Bending Test. J Mater Civ Eng 2018;30:1–8. https://doi.org/10.1061/(asce)mt.1943-5533.0002426. [39] Phan TM, Park DW, Le THM. Crack healing performance of hot mix asphalt containing steel slag by microwaves heating. Constr Build Mater 2018;180:503–11. https://doi.org/10.1016/j.conbuildmat.2018.05.278. [40] Sun Y, Wu S, Liu Q, Zeng W, Chen Z, Ye Q, et al. Self-healing performance of asphalt mixtures through heating fibers or aggregate. Constr Build Mater 2017;150:673–80. https://doi.org/10.1016/j.conbuildmat.2017.06.007. [41] Yang H, Ouyang J, Jiang Z, Ou J. Effect of fiber reinforcement on self-healing ability of asphalt mixture induced by microwave heating. Constr Build Mater 2023;362:129701. https://doi.org/10.1016/j.conbuildmat.2022.129701. [42] Norambuena-Contreras J, Garcia A. Crack-healing evaluation of fibre-reinforced asphalt mixtures using microwave and induction heating. Road Mater Pavement Des 2017;0:1–11. https://doi.org/10.1080/14680629.2017.1304267. [43] Gao J, Sha A, Wang Z, Tong Z, Liu Z. Utilization of steel slag as aggregate in asphalt mixtures for microwave deicing. J Clean Prod 2017;152:429–42. https://doi.org/10.1016/j.jclepro.2017.03.113. [44] Liu J, Wang Z, Jing H, Zhang T, Wang X, Zhou X, et al. Self-healing properties of steel slag asphalt mixture based on experimental characterization and 3D reconstruction. Mater Des 2023;234. https://doi.org/10.1016/j.matdes.2023.112358. [45] García A, Norambuena-Contreras J, Bueno M, Partl MN. Influence of steel wool fibers on the mechanical, termal, and healing properties of dense asphalt concrete. J Test Eval 2014;42. https://doi.org/10.1520/JTE20130197. [46] Norambuena-Contreras J, Serpell R, Valdés Vidal G, González A, Schlangen E. Effect of fibres addition on the physical and mechanical properties of asphalt mixtures with crack-healing purposes by microwave radiation. Constr Build Mater 2016;127:369–82. https://doi.org/10.1016/j.conbuildmat.2016.10.005. [47] Karimi MM, Darabi MK, Jahanbakhsh H, Jahangiri B, Rushing JF. Effect of steel wool fibers on mechanical and induction heating response of conductive asphalt concrete. Int J Pavement Eng 2020;21:1755–68. https://doi.org/10.1080/10298436.2019.1567918. [48] Liu J, Zhang T, Guo H, Wang Z, Wang X. Evaluation of self-healing properties of asphalt mixture containing steel slag under microwave heating: Mechanical, thermal transfer and voids microstructural characteristics. J Clean Prod 2022;342:130932. https://doi.org/10.1016/j.jclepro.2022.130932. [49] Mahmoud AA, Shafik CG, Elshahat MR, Mostafa AEA. Producing Self-Healing Asphalt Pavement Mixture using Induction and Microwave Heating. Trends Adv Sci Technol 2024;1. https://doi.org/10.62537/2974-444x.1010. [50] Shiha M, El-Badawy S, Gabr A. Modeling and performance evaluation of asphalt mixtures and aggregate bases containing steel slag. Constr Build Mater 2020;248:118710. https://doi.org/10.1016/j.conbuildmat.2020.118710. [51] Hassan KE, Attia MIE, Reid M, Al-Kuwari MBS. Performance of steel slag aggregate in asphalt mixtures in a hot desert climate. Case Stud Constr Mater 2021;14:e00534. https://doi.org/10.1016/j.cscm.2021.e00534. [52] Ayatollahi MR, Mahdavi E, Alborzi MJ, Obara Y. Stress intensity factors of semi-circular bend specimens with straight-through and chevron notches. Rock Mech Rock Eng 2016;49:1161–72. https://doi.org/10.1007/s00603-015-0830-y. [53] Rind TA, Jhatial AA, Sandhu AR, Bhatti IA, Ahmed S. Fatigue and Rutting Analysis of Asphaltic Pavement Using “KENLAYER” Software. J Appl Eng Sci 2019;9:177–82. https://doi.org/10.2478/jaes-2019-0024. [54] Behiry AEAEM. Fatigue and rutting lives in flexible pavement. Ain Shams Eng J 2012;3:367–74. https://doi.org/10.1016/j.asej.2012.04.008.
آمار تعداد مشاهده مقاله: 86 تعداد دریافت فایل اصل مقاله: 110

سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب

پیوندهای مفید

پیوندهای مفید

آمار

Extending The Life Cycle of Self-Healed Asphalt Pavements with Recycled Additives