Pratiwi, Yunita, Naharudin, Naharudin, Ilham, Ilham, Wibowo, Dwiprayogo. (1401). Eligibility of Nickel Slag Waste Combined with Stone Ash for Manufacturing Paving Block. هنرهای کاربردی, 10(4), 33-44. doi: 10.22075/jrce.2021.23717.1521
Yunita Eka Pratiwi; Naharudin Naharudin; Ilham Ilham; Dwiprayogo Wibowo. "Eligibility of Nickel Slag Waste Combined with Stone Ash for Manufacturing Paving Block". هنرهای کاربردی, 10, 4, 1401, 33-44. doi: 10.22075/jrce.2021.23717.1521
Pratiwi, Yunita, Naharudin, Naharudin, Ilham, Ilham, Wibowo, Dwiprayogo. (1401). 'Eligibility of Nickel Slag Waste Combined with Stone Ash for Manufacturing Paving Block', هنرهای کاربردی, 10(4), pp. 33-44. doi: 10.22075/jrce.2021.23717.1521
Pratiwi, Yunita, Naharudin, Naharudin, Ilham, Ilham, Wibowo, Dwiprayogo. Eligibility of Nickel Slag Waste Combined with Stone Ash for Manufacturing Paving Block. هنرهای کاربردی, 1401; 10(4): 33-44. doi: 10.22075/jrce.2021.23717.1521

Eligibility of Nickel Slag Waste Combined with Stone Ash for Manufacturing Paving Block

Journal of Rehabilitation in Civil Engineering
مقاله 3، دوره 10، شماره 4 - شماره پیاپی 28، زمستان 2022، صفحه 33-44    اصل مقاله (826.53 K)
نوع مقاله: Regular Paper
شناسه دیجیتال (DOI): 10.22075/jrce.2021.23717.1521
نویسندگان
Yunita Eka Pratiwi1؛ Naharudin Naharudin1؛ Ilham Ilham2؛ Dwiprayogo Wibowo* 1
1Department of Environmental Engineering, Faculty of Engineering, Universitas Muhammadiyah Kendari, Jl. Kh. Akhmad Dahlan No. 10 Kendari 93115 – Southeast Sulawesi, Indonesia
2Faculty of Engineering, Universitas Halu Oleo, Jl. HEA Mokodompit Kampus Hijau Bumi Tridharma Anduonohu, Kendari 93231 – Southeast Sulawesi, Indonesia
چکیده
The application of concrete paving block of nickel slag waste (NSW) to develop low-cost construction materials attracts researchers worldwide owing to the high pessimistic environmental impact of the nickel ore processing industry. It has mild and hard properties which are suitable for the fabrication of paving blocks. This study presents optimization NSW mixed with stone ash for the practical manufacture of concrete paving blocks (CPB). It was prepared in a small aggregate by using disk mill process, then printed by using a mold size of 1200 cm3 with each variation of the composition. Based on these results, we discover the different compressive strength (CS) from CPB which is compared with the Indonesian standard (SNI). Sample D has excellently fabricated with a composition ratio of 1:1:1:1. It is evident from the results of testing CS and water absorption (WA) with a value of 385.00 Kg/cm2 and 4.58%, respectively; both values indicate an appropriate product for the city roads. Meanwhile, sample A represents a standard method that is usually applicable for the sidewalk, and samples B and C also have high durability representing the usage for parking areas.
کلیدواژه‌ها
Nickel slag waste؛ Stone ash؛ Concrete؛ Paving block؛ Bricks
مراجع
آمار
تعداد مشاهده مقاله: 1,147
تعداد دریافت فایل اصل مقاله: 981
دانشگاه سمنان
پیوندهای مفید
آمار
تعداد نشریات22
تعداد شماره‌ها719
تعداد مقالات10,342
تعداد مشاهده مقاله72,682,515
تعداد دریافت فایل اصل مقاله64,304,567