پیوندهای مفید
آمار
| تعداد نشریات | 21 |
| تعداد شمارهها | 687 |
| تعداد مقالات | 9,985 |
| تعداد مشاهده مقاله | 70,959,205 |
| تعداد دریافت فایل اصل مقاله | 62,423,388 |
ارزیابی رفتار لرزهای قاب فولادی دارای ورق پرکننده و مهاربندهای واگرا | ||
| مدل سازی در مهندسی | ||
| دوره 23، شماره 83، دی 1404، صفحه 255-273 اصل مقاله (1.39 M) | ||
| نوع مقاله: مقاله عمران | ||
| شناسه دیجیتال (DOI): 10.22075/jme.2025.33550.2638 | ||
| نویسندگان | ||
| رضا خلیلی ساربانقلی1؛ احمد ملکی* 1؛ رامین کتابفروش بدری2 | ||
| 1گروه مهندسی عمران، واحد مراغه، دانشگاه آزاد اسلامی، مراغه، ایران | ||
| 2گروه مهندسی عمران، واحد آذرشهر، دانشگاه آزاد اسلامی، آذرشهر، ایران | ||
| تاریخ دریافت: 27 اسفند 1402، تاریخ بازنگری: 20 بهمن 1403، تاریخ پذیرش: 11 اسفند 1403 | ||
| چکیده | ||
| از سیستم هایی نوین مقاوم در برابر زلزله می توان به دیوارهای برشی فولادی (SPSW) اشاره کرد. یکی از چالش های مهم دیوارهای برشی فولادی امکان ایجاد بازشو در ورق فولادی می باشد. با این حال ایجاد بازشو، منجر به کاهش سختی، شکل پذیری و مقاومت سازه می شود. در مطالعه حاضر، سیستم باربر جدیدی با در نظر گرفتن بازشو در ورق فولادی و همچنین جهت کنترل کمانش استفاده از مهاربندهای واگرا در لبه بازشو پیشنهاد می گردد. در مدل های پیشنهادی براساس آیین نامه AISC 341، طراحی می شوند و سپس تحت 7 رکورد زلزله نتایج تحلیل های دینامیکی مدل های پیشنهادی با مدل دیوار برشی فولادی بدون بازشو مورد مقایسه قرار می گیرد. نتایج مدل های عددی نشان می دهند که در دیوار برشی فولادی، سهم باربری ورق فولادی برابر 80% و در مدل دارای تیر میانی مابین دو مهاربند(M3)، سهم ورق پرکننده 65% و در مدل دارای تیر میانی سراسری(M2)، سهم ورق پرکننده برابر 30% بار کل جانبی می باشد. در مدل ها با تیر میانی سراسری، ورق های پرکننده وارد مرحله پلاستیک می شوند و تمامی المان های مرزی و بادبندها تقریباً در مرحله الاستیک قرار دارند. همچنین تحت بارگذاری دینامیکی، کاهش یا افزایش ناگهانی به دلیل تسلیم یا گسیختگی ناگهانی المان ها در سیستم پیشنهادی مشاهده نمی شود. | ||
| کلیدواژهها | ||
| دیوار برشی فولادی؛ مهاربند واگرا؛ بارگذاری لرزه ای؛ بازشو | ||
| عنوان مقاله [English] | ||
| Evaluation Seismic Behavior of Steel Frame with Infill Plate and Eccentric Brace | ||
| نویسندگان [English] | ||
| Reza Reza Khalili Sarbangoli1؛ Ahmad Maleki1؛ Ramin K. Badri2 | ||
| 1Department of Civil Engineering, Maragheh Branch, Islamic Azad University, Maragheh, Iran | ||
| 2Department of Civil Engineering, Azarshahr Branch, Islamic Azad University, Azarshahr, Iran | ||
| چکیده [English] | ||
| Steel Plate Shear Walls (SPSW) are modern earthquake-resistant systems. One of the important design challenges of steel shear walls is the possibility of creating an opening in the steel plate. This process decreases the stiffness, ductility, and strength of SPSWs. In the present study, a new bearing system is proposed considering the opening in the steel plate, and controlling the buckling, in the wall using eccentric braces at the edge of the opening. The proposed models are designed in compliance with AISC 341 provisions and then subjected to 7 earthquake records. The results of the dynamic analyses are compared with those of the steel shear wall model without opening. The results of numerical models show that the steel shear wall participates, 80% in load resisting. In the model with a middle beam between two braces (M3), and the model with a central middle beam(M2), the participation of the steel plate is 60% and 30% of the total lateral load, respectively. In the models with the central middle beam, the plate has entered the plastic stage, and all the boundary elements almost remain elastic. Moreover, a sudden decrease or increase due to sudden yielding or failure of elements is not observed in the proposed system under dynamic loading. | ||
| کلیدواژهها [English] | ||
| Steel plate shear wall, Eccentric brace, Seismic loading, Opening | ||
| مراجع | ||
|
[1] Wang, Meng, Weiguo Yang, Yongjiu Shi, and Jian Xu. "Seismic Behaviors of Steel Plate Shear Wall Structures with Construction Details and Materials." Journal of Constructional Steel Research 107 (2015): 194–210. https://doi.org/https://doi.org/10.1016/j.jcsr.2015.01.007. [2] Dastfan, Mehdi, and Robert Driver. "Test of a Steel Plate Shear Wall with Partially Encased Composite Columns and RBS Frame Connections." Journal of Structural Engineering 144, no. 2 (2018): 4017187. https://doi.org/10.1061/(asce)st.1943-541x.0001954. [3] Ashrafi, Hamid Reza, Peyman Beiranvand, Majid Pouraminian, and Marziye Sadat Moayeri. "Examining the Impact of Sheet Placement and Changes in Waves Characteristics on Behavior of Wavy Steel Shear Wall." Case Studies in Construction Materials 9 (2018): e00180. https://doi.org/https://doi.org/10.1016/j.cscm.2018.e00180. [4] Jin, Shuangshuang, Shengchao Yang, and Jiulin Bai. "Numerical and Experimental Investigation of the Full-Scale Buckling-Restrained Steel Plate Shear Wall with Inclined Slots." Thin-Walled Structures 144 (2019): 106362. https://doi.org/https://doi.org/10.1016/j.tws.2019.106362. [5] Farzampour, Alireza, Jeffrey A Laman, and Massod Mofid. "Behavior Prediction of Corrugated Steel Plate Shear Walls with Openings." Journal of Constructional Steel Research 114 (2015): 258–68. https://doi.org/https://doi.org/10.1016/j.jcsr.2015.07.018. [6] Nassernia, Sina, and Hossein Showkati. "Experimental Study of Opening Effects on Mid-Span Steel Plate Shear Walls." Journal of Constructional Steel Research 137 (2017): 8–18. [7] Zarrinkolaei, Fatemeh Ahmadi, Ali Naseri, and Siroos Gholampour. "Numerical Assessment of Effect of Opening on Behavior of Perforated Steel Shear Walls." Journal of Constructional Steel Research 181 (2021): 106587. [8] Roudsari, Sajjad Sayyar, Sayed M Soleimani, and Sameer A Hamoush. "Analytical Study of the Effects of Opening Characteristics and Plate Thickness on the Performance of Sinusoidal and Trapezoidal Corrugated Steel Plate Shear Walls." Journal of Constructional Steel Research 182 (2021): 106660. [9] Paslar, Nima, Alireza Farzampour, and Farzad Hatami. "Infill Plate Interconnection Effects on the Structural Behavior of Steel Plate Shear Walls." Thin-Walled Structures 149 (2020): 106621. [10] Purba, Ronny, and Michel Bruneau. "Experimental Investigation of Steel Plate Shear Walls with In-Span Plastification along Horizontal Boundary Elements." Engineering Structures 97 (2015): 68–79. https://doi.org/10.1016/j.engstruct.2015.04.008. [11] Sharbatdar, Mohammad-Kazem, and Mohammad Khosroabadi. "Investigation of Design Codes Reliability for Seismic Design of Steel Plate Shear Walls Consisting of Several Parameters." Journal of Modeling in Engineering, 16 52 (2018): 277-297. (in Persian) doi: 10.22075/jme.2018.2941. [12] Hemmati, Ali, and Ali Kheyroddin. "Investigation of Transition Story Effect on Behavior of Vertically Hybrid Building." Journal of Modeling in Engineering 9 (2011): 57–66. (in Persian) [13] Sabouri-Ghomi, Saeid, and Salaheddin Mamazizi. "Experimental Investigation on Stiffened Steel Plate Shear Walls with Two Rectangular Openings." Thin-Walled Structures 86 (2015): 56–66. https://doi.org/10.1016/j.tws.2014.10.005. [14] Sahoo, Dipti Ranjan, Balsher Singh Sidhu, and Arunesh Kumar. "Behavior of Unstiffened Steel Plate Shear Wall with Simple Beam-to-Column Connections and Flexible Boundary Elements." International Journal of Steel Structures 15, no. 1 (2015): 75–87. https://doi.org/10.1007/s13296-015-3005-5. [15] Sattarian Karajabad, Hamid, and Ahmad Maleki. "Numerical Analysis of Performance of Eccentric Braced Frames Equipped with the Steel Plate in the area Under the link beam and the beam out of the link." Journal of Anaysis Structuer-Earthquacke 15, no. 4 (2019): 13–23 (in Persian). [16] Khalili Sarbangoli, Reza, Ahmad Maleki and Ramin Ketabfroosh Badri. "Evaluation of steel Frame with infill plate and eccentric braced under posh over loading." Modares Civil Engineering Journal 21, no. 5 (2021): 13–23 (in Persian). [17] Ansi, B. "AISC 360-16, Specification for Structural Steel Buildings." Chicago AISC, (2016). [18] Berman, Jeffrey W, and Michel Bruneau. "Experimental and Analytical Investigation of Tubular Links for Eccentrically Braced Frames." Engineering Structures 29, no. 8 (2007): 1929–38. https://doi.org/https://doi.org/10.1016/j.engstruct.2006.10.012. [19] Sigariyazd, Mohammadhossein Akhavan, Abdolreza Joghataie, and Nader K A Attari. "Analysis and Design Recommendations for Diagonally Stiffened Steel Plate Shear Walls." Thin-Walled Structures 103 (2016): 72–80. https://doi.org/10.1016/j.tws.2016.02.008. [20] Wang, Meng, Yongjiu Shi, Jian Xu, Weiguo Yang, and Yixin Li. "Experimental and Numerical Study of Unstiffened Steel Plate Shear Wall Structures." Journal of Constructional Steel Research 112 (2015): 373–86. https://doi.org/10.1016/j.jcsr.2015.05.002. [21] Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard No. 2800), 4th Edition, 31st Print, 2024 [22] Topic 6 of Building National Regulations, Loads Imposed to Buildings, Fourth Edition [23] Loads, Minimum Design, Associated Criteria, and Other Structures. Minimum Design Loads and Associated Criteria for Buildings and Other Structures. Minimum Design Loads and Associated Criteria for Buildings and Other Structures, 2017. https://doi.org/10.1061/9780784414248. [24] Zare, Mahdi. "Earthquake risk and construction in the North Tabriz fault zone and the fault zone of Iran's seismic faults." http://old.iiees.ac.ir/fa/wp-content/uploads/2009/03/sum_aut_80_6.pdf, (2009): 46-57 (in Persian). [25] ASCE 41-13, Standard. Seismic Evaluation and Retrofit of Existing Buildings (ASCE/SEI 41-13). Seismic Rehabilitation of Existing Buildings, 2007. http://repositorio.puce.edu.ec/bitstream/handle/22000/15247/ASCE 41-13.pdf. [26] Mualla, Imad H, and Borislav Belev. "Performance of Steel Frames with a New Friction Damper Device under Earthquake Excitation." Engineering Structures 24, no. 3 (2002): 365–71.
| ||
|
آمار تعداد مشاهده مقاله: 391 تعداد دریافت فایل اصل مقاله: 202 |
||